(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
TiAlN Coat, Carbide long neck square end mill, 4 flutes (VHMS-4-005-064-06-03-L080)
[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55.
· 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)
Japanese Only
Part Number
Configured Part Number is shown.
VHMS-4-005-064-06-03-L080
| Part Number |
|---|
| VHMS-4-005-064-06-03-L080 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Maximum Machining Depth (mm) | Neck angle (°) | Neck diameter (mm) | Actual Effective Length for Workpiece Gradient Angle of 0.5° | Actual effective length at work slope angle 1° | Actual Effective Length for Workpiece Gradient Angle of 2° | Actual Effective Length for Workpiece Gradient Angle of 3° |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 299.48 | 1 Piece(s) | 4 Day(s) or more | 0.5 | 0.8 | 8.00 | 15 | 0.47 | 8.327 | 8.617 | 9.263 | 10.015 |
Loading...
Basic Information
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / High hardness steel –HRC65 / Stainless Steel / Titanium | Number of flutes(sheet) | 4 | Type | Long-Neck Square |
|---|---|---|---|---|---|
| Coating | TiAlN | Shank diameter (d)(mm) | 6 | Overall Length (L)(mm) | 64 |
| Cutting edge accuracy | g7 | Shank Accuracy | h5 |
Please check the type/dimensions/specifications of the part VHMS-4-005-064-06-03-L080 in the TiAlN Coat, Carbide long neck square end mill, 4 flutes series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| VHMS-4-004-064-06-03-L060 |
| VHMS-4-004-064-06-03-L080 |
| VHMS-4-004-064-06-03-L100 |
| VHMS-4-005-064-06-03-L100 |
| VHMS-4-010-064-06-03-L015 |
| VHMS-4-010-064-06-03-L060 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Maximum Machining Depth (mm) | Neck angle (°) | Neck diameter (mm) | Actual Effective Length for Workpiece Gradient Angle of 0.5° | Actual effective length at work slope angle 1° | Actual Effective Length for Workpiece Gradient Angle of 2° | Actual Effective Length for Workpiece Gradient Angle of 3° |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 312.42 | 1 Piece(s) | 4 Day(s) or more | 0.4 | 0.6 | 6.00 | 15 | 0.38 | 6.241 | 6.459 | 6.943 | 7.508 | ||
MYR 541.67 | 1 Piece(s) | 4 Day(s) or more | 0.4 | 0.6 | 8.00 | 15 | 0.38 | 8.308 | 8.597 | 9.242 | 9.992 | ||
MYR 592.81 | 1 Piece(s) | 4 Day(s) or more | 0.4 | 0.6 | 10.00 | 15 | 0.38 | 10.375 | 10.737 | 11.541 | 12.478 | ||
MYR 299.48 | 1 Piece(s) | 4 Day(s) or more | 0.5 | 0.8 | 10.00 | 15 | 0.47 | 10.395 | 10.757 | 11.563 | 12.501 | ||
MYR 212.40 | 1 Piece(s) | 4 Day(s) or more | 1 | 1.5 | 2.00 | 10 | 0.95 | 3.055 | 3.223 | 3.621 | 4.133 | ||
MYR 212.40 | 1 Piece(s) | 4 Day(s) or more | 1 | 1.5 | 6.00 | 14 | 0.95 | 6.334 | 6.582 | 7.141 | 7.805 |
Additional Products in this Category
- TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model
- XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model
- ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6
- C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]
- CPS 2-Flute Square for Resin Machining [Alteration Supported Product]
- X Coated 2-Flute Long Neck End Mill (For deep rib) NHR-2X
- MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)
- SED2LA Long Square End Mill, 2-Flute, OK Coated
Customers Who Viewed This Item Also Viewed
-
MHRH430 4-Flute Long Neck End Mill for High-HardnessNS TOOL
Standard Price : MYR 186.90-
Days to Ship : 10 Day(s)
-
PCD 2-Flute Spiral Square End Mill DSE-2KYOWA SEIKO
Standard Price : MYR 3,359.42-
Days to Ship : 6 Day(s) or more
-
OptiMill® Carbide End Mill for Stainless Steel (4 Flutes)MAPAL
Standard Price : MYR 304.76-
Days to Ship : 8 Day(s) or more
-
![[AlCr-based coat] Carbide 4-blade End Mill EA824RD-2.0](//my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007523206.jpg?$product_recommend_b$)
[AlCr-based coat] Carbide 4-blade End Mill EA824RD-2.0ESCO
Standard Price : MYR 221.84
Days to Ship : 8 Day(s) or more
![[AlCr-based coat] Carbide 4-blade End Mill EA824RD-2.0](http://my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007523206.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy