Ion Parts Cleaner IPC-A3
Part Number: IPC-A3

A dust collecting static eliminator made suitable for cell production sites by compactly integrating the workbench and small dust collector.
[Features]
· A clear window which can be opened or closed is created on the front surface of the hood to prevent scatter and to maintain a good visibility. Optimal opening design.
· A paper pack filter for dust collection or duct hose can be attached to the back of the hood.
· 2 air nozzle type ionizers are built in. Vibration is applied to the dust adhered to the workpiece, using intermittent air streams to blow it off.
· It is possible to set the time at which ion blowing stops after detecting the workpiece with the sensor. Built-in air regulator.
· When the gel sheet becomes dirty, it can be washed with water and dried to be used over and over again.
· No dust-collector required, saving power and reducing running costs. Pulse blowing also reduces the amount of air used.
[Applications]
· Useful for ionization and dust removal of circuit boards and semiconductor devices, ionization and dust removal prior to printing, dust removal prior to product packaging, etc.

Specifications of IPC-A3

• Product Type

  Unit Type

• Type

  AC System

• Input Power Supply(V)

  DC24V±5％

• Current Consumption(mA)

  900

• Width(mm)

  420

• Depth(mm)

  300

• Height(mm)

  411

• Power Consumption(W)

  22

• Mass(g)

  9500

• Air Coupling

  Tube joint 10 mmφ

• Ozone Generation Amount

  0.05 ppm or less (50 mm)

• Dust Collecting Air Volume(m³/min)

  1.13

• Operating Temperature

  5～40°C

• Operating Humidity

  35 to 65% RH (with no condensation/freezing)

• Applicable Fluids

  Clean Air (0.1 to 0.7 MPa)

• Air consumption flow rate

  300(ℓ/min)

Please check the type/dimensions/specifications of the part IPC-A3 in the Ion Parts Cleaner IPC-A3 series.