• Volume Discount

Fluoropolymer Film, Nitoflon, No. 900/No. 901/No. 902
Part Number: N901UL-100-10-0.2-PACK

A fluororesin tape with NITOFLON film as the base.
[Features]
· Almost never damaged with acid such as nitric acid, sulfuric acid, hydrochloric acid, and phosphoric acid, or alkalis such as caustic alkali and ammonia.
· Has excellent electrical characteristics such as low dielectric loss, high insulation resistance, breakdown voltage, etc.
· Wide continuous use range from -100°C to 260°C.
· Excellent self-lubricating properties and provides oilless bearings with good friction resistance and anti-cold flow properties when used together with various fillers.
· Provides outstanding resistance to weather and moisture, and is also highly flame-resistant.
· A fluorine resin film with excellent heat resistance of maximum continuous working temperature of 260°C.
· UL standard certified (flame retardant standard).
· UL (Underwriters Laboratories) is an institution that maintains social trust as the highest authority of safety inspection in the United States.
· If machinery and parts requested here have been authorized as conforming with the standards, use of the UL listing mark for the product will be approved.
· NITOFLON® tape (excluding No.923S) has acquired the UL standard, and this symbol is printed on the package.
[Applications]
· Thrust washer, motor/transformer coil insulation.
· For removing FRP/CFRP molding, crimping release for ACF (anisotropic conductive film), transfer release for carbon layer supporting the catalysts for fuel cells.

Specificationtitle

• Product Type

  Film

• Width(mm)

  100

• Length(m)

  10

• Thickness(mm)

  0.2

• Details Type

  Single-sided chemical adhesive processed

• Tensile Strength

  50MPa

• Stretch

  330%

• Dielectric breakdown strength(KV)

  14.1

• Base Materials

  Single-sided adhesive PTFE film

• Specific Gravity

  2.1~2.3

• Dynamic friction coefficient

  0.1

• Volume resistivity(Ω・cm)

  1 x 10¹⁷ or more

• Permittivity(1MHz)

  2.1

• Arc resistance(sec)

  180 or more

• Flame resistance

  VTM-0 (0.02-0.24 mmt)/V-0 (0.25 mmt or above)

• Fusing point(°C)

  327