(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Tip for Lathe, CBN Diamond, Positive TPMH (TPMH090202SE-KPD001)
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 1
· Rake Angle: Positive
[Applications]
· For Outer Diameter / Inner Diameter
Part Number
Configured Part Number is shown.
TPMH090202SE-KPD001
Basic Information
| Shape | T (Triangular) | work material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Application | Outer Diameter / Inner Diameter |
|---|---|---|---|---|---|
| Available corners | 1 | Rake angle | Positive | Selfishly | No Preferred Hand |
| α | 11° |
Please check the type/dimensions/specifications of the part TPMH090202SE-KPD001 in the Tip for Lathe, CBN Diamond, Positive TPMH series.
Specification/Dimensions
-
type
- TPMH080201NE
- TPMH080202
- TPMH080202NE
- TPMH080202SE
- TPMH080204
- TPMH080204NE
- TPMH080204SE
- TPMH090201
- TPMH090201NE
- TPMH090202
- TPMH090202NE
- TPMH090202SE
- TPMH090204
- TPMH090204NE
- TPMH090204SE
- TPMH110301
- TPMH110301NE
- TPMH110301SE
- TPMH110302
- TPMH110302L
- TPMH110302NE
- TPMH110302SE
- TPMH110304
- TPMH110304NE
- TPMH110308NE
- TPMH160302
- TPMH160302SE
- TPMH160304
- TPMH160304NE
- TPMH160304SE
- TPMH160308
-
Nose R
-
rε
- 0.1
- 0.2
- 0.4
- 0.8
-
Material
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| TPMH080202NE-KPD001 |
| TPMH080202SE-KPD001 |
| TPMH080204-KPD001 |
| TPMH090204-KPD001 |
| TPMH090204-KPD010 |
| TPMH090204NE-KPD001 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nose R | rε | Material | φd | A | S | T |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 419.22 | 1 Piece(s) | 6 Day(s) or more | 0.2 | 0.2 | KPD001 | 2.5 | 4.76 | 2.2 | 2.38 | ||
MYR 158.18 | 1 Piece(s) | 6 Day(s) or more | 0.2 | 0.2 | KPD001 | 2.5 | 4.76 | 2 | 2.38 | ||
MYR 555.27 | 1 Piece(s) | 6 Day(s) or more | 0.4 | 0.4 | KPD001 | 2.5 | 4.76 | 2.3 | 2.38 | ||
MYR 555.27 | 1 Piece(s) | 6 Day(s) or more | 0.4 | 0.4 | KPD001 | 3 | 5.56 | 2.8 | 2.38 | ||
MYR 555.27 | 1 Piece(s) | 7 Day(s) or more | 0.4 | 0.4 | KPD010 | 3 | 5.56 | 2.8 | 2.38 | ||
MYR 419.22 | 1 Piece(s) | 6 Day(s) or more | 0.4 | 0.4 | KPD001 | 3 | 5.56 | 2.5 | 2.38 |
Additional Products in this Category
- Sumi Boron Chip V (35° Rhombus) 2NU-VNGA
- Insert (For Super Small Diameter CKB Type)
- Blade Tip Replacement Tip C (80°Diamond) CPGT-L-FX
- Blade Replacement Insert V (35° Rhombic) VPET-R-FX
- Thread Cutting Tip(for without Finishing Blade, BMA)
- Kyocera Turning Insert CA530 CVD Coating
- CA3 Series DNMG (C Breaker)
- SUMIBORON Insert V (35° Diamond) 4NC-VNGG-N-LV
Customers Who Viewed This Item Also Viewed
-
Used for SEC-Wave Mill AXET-PEFR-SSUMITOMO_ELEC_
Standard Price : MYR 40.04-
Days to Ship : 7 Day(s) or more
-
Curved Surface Fine Sander for Curved And Rough Surfaces Polishing PadTOKYO AUTOMACH
Standard Price : MYR 128.81-
Days to Ship : 8 Day(s)
-
Sumi Diamond Chip D (55° Rhombus) DNMXSUMITOMO_ELEC_
Standard Price : MYR 543.72
Days to Ship : 7 Day(s) or more
-
Dryer, Hollow Fiber Membrane Air Dryer Filter Set MDFUKUHARA
Standard Price : MYR 14,455.79-
Days to Ship : 10 Day(s) or more
-
-
Tip for Lathe, CBN Diamond, Positive TPGBKYOCERA
Standard Price : MYR 133.38-
Days to Ship : 5 Day(s) or more
-
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
Standard Price : MYR 39.58-
Days to Ship : 4 Day(s) or more
-
60° Triangle Positive with Hole TCMT ○○HQ "Finishing"
KYOCERA
Standard Price : MYR 21.71-
Days to Ship : 4 Day(s) or more
-
S-SCLC-A Type Steel Bar (inner diameter, inner end surface machining)KYOCERA
Standard Price : MYR 601.95-
Days to Ship : 6 Day(s) or more
-
Tip for Lathe, CBN Diamond, Positive CCMTKYOCERA
Standard Price : MYR 166.96-
Days to Ship : 6 Day(s) or more
-
Tip for Lathe, CBN Diamond, Positive TBMT
KYOCERA
Standard Price : MYR 419.22-
Days to Ship : 5 Day(s) or more
-
60° Triangle Positive with Hole TPGB without Breaker "Cast Iron"
KYOCERA
Standard Price : MYR 37.06-
Days to Ship : 6 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy