(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
L-Type Clamp (Heavy-Duty Model) Heavy Type (GS30C)
Strong type can be tightened more securely by final wrench tightening using hex hole on screw head. The maximum tightening pressure at 150 mm clamping is 13.5 kN. Heavy-duty adapter can tighten angles up to about 35°.
Part Number
Configured Part Number is shown.
GS30C
Features
●Because the shaft head is a hexagon that can be tightened with a wrench, it can be tightened more reliably.Materials
●Special Steel| Part Number |
|---|
| GS30C |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Overall Length (mm) | Maximum Opening (mm) | Pocket (mm) | JAN Code | Trusco Code | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 497.32 | 1 Piece(s) | 8 Day(s) | 438 | 300 | 140 | 4989999265408 | 445-4707 | 2960 |
Loading...
Basic Information
| Details Type | Heavy Type | Frame Dimensions A(mm) | 30 | Frame Dimensions B(mm) | 15.0 |
|---|---|---|---|---|---|
| Material | Special Steel | Features | Strong type can be tightened more securely by final wrench tightening using hex hole on screw head. Maximum tightening pressure at 150 mm clamping is 13.5 kN. Strong type adapter can tighten angle up to about 35°. |
Please check the type/dimensions/specifications of the part GS30C in the L-Type Clamp (Heavy-Duty Model) Heavy Type series.
Specification/Dimensions
-
type
- GS-C
-
Overall Length(mm)
-
Maximum Opening(mm)
-
Pocket(mm)
-
JAN Code
-
Trusco Code
Days to Ship
-
- All
- 8 Day(s) or Less
- 9 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| GS125C |
| GS150C |
| GS25C |
| GS40C |
| GS50C |
| GS60C |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Overall Length (mm) | Maximum Opening (mm) | Pocket (mm) | JAN Code | Trusco Code | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 892.80 | 1 Piece(s) | 12 Day(s) or more | 1388 | 1250 | 120 | 4989999265378 | 445-4677 | 5940 | ||
MYR 1,004.51 | 1 Piece(s) | 9 Day(s) or more | 1638 | 1500 | 120 | 4989999265385 | 445-4685 | 6650 | ||
MYR 436.58 | 1 Piece(s) | 8 Day(s) | 388 | 250 | 120 | 4989999265392 | 445-4693 | 2760 | ||
MYR 535.59 | 1 Piece(s) | 8 Day(s) | 538 | 400 | 120 | 4989999265415 | 445-4715 | 3200 | ||
MYR 593.46 | 1 Piece(s) | 8 Day(s) | 638 | 500 | 140 | 4989999265422 | 445-4723 | 3660 | ||
MYR 625.74 | 1 Piece(s) | 8 Day(s) | 738 | 600 | 120 | 4989999265439 | 445-4731 | 3870 |
Additional Products in this Category
- L Type Clamp (Single-Action) Attachment
- Curved Jaw-Type Locking Pliers
- Uni Clamp, Independent Type, Part (Main Body and Independent Metal Washer Set)
- Uni-Clamp (Washer)
- Clamp (Made of Plastic)
- Clamp (J type)
- 145 mm/3-10mm Glass Cutter
- Strong Tool Parallel Clamps, 2-Piece Set
Customers Who Viewed This Item Also Viewed
-
Gate Valve, 125S Type Bronze Screw DownTOYO VALVE
Standard Price : MYR 79.04-
Days to Ship : 7 Day(s) or more
-
Rabcon Nabe Phillips Pan Head Drill Screw for ConcreteKITAMURA_SEIKO
Standard Price : MYR 45.29-
Days to Ship : 5 Day(s) or more
-
Mini-Lock™ 2.50 mm Pitch Wire-to-Circuiboard Wafer (53517)MOLEX
Standard Price : MYR 2.97
Days to Ship : 4 Day(s) or more
-
Fall Prevention Bar for BR Type Rack Storage ShelvesTAKACHI
Standard Price : MYR 63.70
Days to Ship : 4 Day(s) or more
-
Stainless Steel Unequal Lead End Mill RF100VA 6707GUHRING
Standard Price : MYR 2,301.71
Days to Ship : 6 Day(s) or more
-
Lead Vise with Turntable (Heavy Duty Rectangular Body Shaft) Female ScrewTRUSCO NAKAYAMA
Standard Price : MYR 134.28-
Days to Ship : 8 Day(s)
-
Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○HQ "for Finishing"KYOCERA
Standard Price : MYR 31.22-
Days to Ship : 5 Day(s) or more
-
Kyocera Turning Insert PV720 PVD Cermet (CCMT/CNMG)KYOCERA
Standard Price : MYR 31.11-
Days to Ship : 10 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy