(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
End Mill with 4 Carbide Flutes and Corner Radius KSRA-4
[Features]
A carbide end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes, with corner R.
It is resistant to breakage and chipping.
The high cutting speed and high production efficiency lead to overall production cost reduction.
[Applications]
Suitable for slab milling, side milling, curved surface milling, grooving, and ramping.
Part Number
Configured Part Number is shown.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Corner R (mm) |
|---|---|---|---|---|---|---|---|
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 1 | 3 | 0.1 | ||
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 1 | 3 | 0.2 | ||
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 1 | 3 | 0.3 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 1.5 | 4 | 0.1 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 1.5 | 4 | 0.2 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 1.5 | 4 | 0.3 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 1.5 | 4 | 0.5 | ||
MYR 527.04 | 1 Piece(s) | 6 Day(s) or more | 2 | 6 | 0.1 | ||
MYR 527.04 | 1 Piece(s) | 6 Day(s) or more | 2 | 6 | 0.2 | ||
MYR 527.04 | 1 Piece(s) | 6 Day(s) or more | 2 | 6 | 0.3 | ||
MYR 527.04 | 1 Piece(s) | 6 Day(s) or more | 2 | 6 | 0.5 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 8 | 0.1 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 8 | 0.2 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 8 | 0.3 | ||
MYR 561.47 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 8 | 0.5 | ||
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 8 | 0.75 | ||
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 3 | 10 | 0.1 | ||
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 3 | 10 | 0.2 | ||
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 3 | 10 | 0.3 | ||
MYR 587.30 | 1 Piece(s) | 6 Day(s) or more | 3 | 10 | 0.5 | ||
MYR 634.65 | 1 Piece(s) | 6 Day(s) or more | 3 | 10 | 0.75 | ||
MYR 634.65 | 1 Piece(s) | 6 Day(s) or more | 3 | 10 | 1 |
Loading...
Basic Information
| work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Number of flutes(sheet) | 4 | Type | radius |
|---|---|---|---|---|---|
| Overall Length (L)(mm) | 60 | Shank diameter (d)(mm) | 3 | Machining Application | Plane / Side / Curved surface / Groove / Inclined Cuts |
| Coating | TiAlN | Torsion Angle (θ) | Standard torsion (30-40°) | Blade diameter tolerance | 0～－0.01 |
| Handle diameter tolerance | 0～－0.006 | Rounded Corner Allowable Difference | ＋0.01～－0.01 | Material | Ultrafine particle alloys |
| Torsion Angle details | 30° |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
- TSC series carbide radius end mill, 2-flute / regular model
- Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
- TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
- XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type
- Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius
- CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
- GSX, Long Shank, Radius, 1.5D, for Ti/SUS, GSXVLLS4T-R-1.5D
Customers Who Viewed This Item Also Viewed
-
End Mill with 2 Carbide Flutes and Corner Radius KSR-2KYOWA SEIKO
Standard Price : MYR 311.82-
Days to Ship : 6 Day(s) or more
-
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner RadiusOSG
Standard Price : MYR 3,975.76-
Days to Ship : 5 Day(s) or more
-
WXS Coated Multiple Flutes Short SuperOSG
Standard Price : MYR 1,115.36
Days to Ship : 5 Day(s) or more
-
Micro Grain Carbide End Mills Multiple Flutes Short with Corner RadiusOSG
Standard Price : MYR 792.41
Days to Ship : 4 Day(s) or more
-
Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed RadiusOSG
Standard Price : MYR 567.58-
Days to Ship : 5 Day(s) or more
-
C-CTE 4000, UT Coat, 4-Flute TaperedUNION TOOL
Standard Price : MYR 333.90-
Days to Ship : 5 Day(s) or more
-
MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345NS TOOL
Standard Price : MYR 287.88-
Days to Ship : 4 Day(s) or more
-
Carbide Solid Taper Ball End MillEIKOSHA
Standard Price : MYR 403.29-
Days to Ship : 6 Day(s) or more
-
Carbide Solid Long Taper Ball End MillEIKOSHA
Standard Price : MYR 479.53-
Days to Ship : 6 Day(s) or more
-
Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)DIJET
Standard Price : MYR 532.68-
Days to Ship : 7 Day(s) or more
-
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)DIJET
Standard Price : MYR 467.50-
Days to Ship : 5 Day(s) or more
-
One Cut Ball Long Type DZ-OCLB-TDIJET
Standard Price : MYR 1,227.75-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy