(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
CoroCut, Q Cut, Blade/Adapter (RF123M100-45B1)
- Volume Discount
Unique shape exhibits high performance
Part Number
Configured Part Number is shown.
RF123M100-45B1
| Part Number |
|---|
| RF123M100-45B1 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Application | Groove Width (mm) | Maximum Groove Depth (mm) | Selfishly | Number of corners for tip use | Shank height (mm) | Cutting Angle (°) | Sheet size | Clamp System | Dimension B (mm) | Dimension H1 (mm) | Dimension L1 (mm) | Gauge Chip | Tip tightening torque (Nm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 2,075.21 | 1 Piece(s) | 10 Day(s) | Outer Diameter Grooving / Cutting off | 11 | 100 | Right-hand | 1 Corner | 50.8 | 0 | M | Screw Clamp | 8.15 | 45 | 250 | N123M1-1100-GM | 4.5 |
Loading...
Please check the type/dimensions/specifications of the part RF123M100-45B1 in the CoroCut, Q Cut, Blade/Adapter series.
Specification/Dimensions
-
Application
- Outer Diameter Grooving
- Cutting off
-
type
- R/LF123
-
Groove Width(mm)
-
Maximum Groove Depth(mm)
-
Selfishly
- Right-hand
- Left-hand
-
Number of corners for tip use
- 1 Corner
- 2 Corner
-
Shank height(mm)
-
Cutting Angle(°)
- 0
-
Sheet size
-
Clamp System
- Screw Clamp
-
Dimension B(mm)
-
Dimension H1(mm)
-
Dimension L1(mm)
-
Gauge Chip
-
Tip tightening torque(Nm)
Days to Ship
-
- All
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| LF123M120-93B1 |
| LF123R120-93B1 |
| RF123E20-21B1 |
| RF123E25-25B1 |
| RF123M120-93B1 |
| RF123R120-93B1 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Application | Groove Width (mm) | Maximum Groove Depth (mm) | Selfishly | Number of corners for tip use | Shank height (mm) | Cutting Angle (°) | Sheet size | Clamp System | Dimension B (mm) | Dimension H1 (mm) | Dimension L1 (mm) | Gauge Chip | Tip tightening torque (Nm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 4,136.71 | 1 Piece(s) | 10 Day(s) | Outer Diameter Grooving / Cutting off | 11 | 120 | Left-hand | 1 Corner | 101.6 | 0 | M | Screw Clamp | 8.15 | 93 | 300 | N123M1-1100-GM | 4.5 | ||
MYR 4,136.71 | 1 Piece(s) | 10 Day(s) | Outer Diameter Grooving / Cutting off | 15 | 120 | Left-hand | 1 Corner | 101.6 | 0 | R | Screw Clamp | 11.1 | 93 | 300 | N123R1-1500-GR | 4.5 | ||
MYR 1,241.76 | 1 Piece(s) | Available | 10 Day(s) | Outer Diameter Grooving / Cutting off | 2 | 20 | Right-hand | 2 Corner | 25.9 | 0 | E | Screw Clamp | 7.25 | 21 | 110 | N123E2-0200-0002-CM | 3.3 | |
MYR 1,241.76 | 1 Piece(s) | Available | 10 Day(s) | Outer Diameter Grooving / Cutting off | 2 | 25 | Right-hand | 2 Corner | 31.9 | 0 | E | Screw Clamp | 8 | 25 | 150 | N123E2-0200-CM | 3.3 | |
MYR 4,136.71 | 1 Piece(s) | 10 Day(s) | Outer Diameter Grooving / Cutting off | 11 | 120 | Right-hand | 1 Corner | 101.6 | 0 | M | Screw Clamp | 8.15 | 93 | 300 | N123M1-1100-GM | 4.5 | ||
MYR 4,136.71 | 1 Piece(s) | 10 Day(s) | Outer Diameter Grooving / Cutting off | 15 | 120 | Right-hand | 1 Corner | 101.6 | 0 | R | Screw Clamp | 11.1 | 93 | 300 | N123R1-1500-GR | 4.5 |
Additional Products in this Category
- SEC-Grooved Bit (for tip surface groove) GNDF Type
- Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type
- Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve
- Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip
- KGDF Type End Face Grooving GDFM/GDFMS Types
- Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving
- Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF
- Kyocera, Grooving Holder, GFVT Type
Customers Who Viewed This Item Also Viewed
-
SEC-Grooved Bit (for outer diameter multi-functional groove, lateral feed, copying) GNDM TypeSUMITOMO_ELEC_
Standard Price : MYR 826.47-
Days to Ship : 7 Day(s) or more
-
SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL TypeSUMITOMO_ELEC_
Standard Price : MYR 826.47-
Days to Ship : 7 Day(s) or more
-
CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2SANDVIK
Standard Price : MYR 987.69-
Days to Ship : 10 Day(s)
-
CORO-TURN SL70, HP Cutting Head for GroovingSANDVIK
Standard Price : MYR 3,493.53-
Days to Ship : 10 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy