(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.　

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Super U Drill (Corodrill 880) (Part Numbers)

Super U Drill (Corodrill 880)
  • Volume Discount

SANDVIK

SANDVIK

A Blade Tip Replacement Type Insert Drill With High Productivity

Part Number

Configured Part Number is shown.

30
60
90
  1. << Prev
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7
  7. Next >>
Part Number
880-D3200L40-05
880-D3250L40-03
880-D3300L40-02
880-D3300L40-03
880-D3300L40-04
880-D3300L40-05
880-D3350L40-03
880-D3400L40-02
880-D3400L40-03
880-D3400L40-04
880-D3400L40-05
880-D3450L40-03
880-D3500L40-02
880-D3500L40-03
880-D3500L40-04
880-D3500L40-05
880-D3550L40-03
880-D3600L40-02
880-D3600L40-03
880-D3600L40-04
880-D3600L40-05
880-D3700L40-02
880-D3700L40-03
880-D3700L40-04
880-D3700L40-05
880-D3800L40-02
880-D3800L40-03
880-D3800L40-04
880-D3800L40-05
880-D3900L40-02
880-D3900L40-03
880-D3900L40-04
880-D3900L40-05
880-D4000L40-02
880-D4000L40-03
880-D4000L40-04
880-D4000L40-05
880-D4100L40-02
880-D4100L40-03
880-D4100L40-04
880-D4100L40-05
880-D4200L40-02
880-D4200L40-03
880-D4200L50-04
880-D4200L50-05
880-D4300L40-02
880-D4300L40-03
880-D4300L50-04
880-D4300L50-05
880-D4400L40-02
880-D4400L40-03
880-D4400L50-04
880-D4500L40-02
880-D4500L40-03
880-D4500L50-04
880-D4600L40-02
880-D4600L40-03
880-D4600L50-04
880-D4700L40-02
880-D4700L40-03
880-D4700L50-04
880-D4800L40-02
880-D4800L40-03
880-D4800L50-04
880-D4900L40-02
880-D4900L40-03
880-D4900L50-04
880-D5000L40-02
880-D5000L40-03
880-D5000L50-04
880-D5100L40-02
880-D5100L40-03
880-D5100L50-04
880-D5200L40-02
880-D5200L40-03
880-D5200L50-04
880-D5300L40-02
880-D5300L40-03
880-D5400L40-02
880-D5400L40-03
880-D5500L40-02
880-D5500L40-03
880-D5600L40-02
880-D5600L40-03
880-D5700L40-02
880-D5700L40-03
880-D5800L40-02
880-D5800L40-03
880-D5900L40-02
880-D5900L40-03
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm) 		Groove Length L
(mm) 		work material Overall Length L
(mm) 		Shank Type With/without Oil Hole Maximum Machining Depth
(mm) 		Program Length
(mm) 		Shank type
(mm) 		Screw pilot hole size Radial Direction Adjustment Amount (max) Maximum Diameter
(mm) 		Tip angle
(°) 		Machining Tolerance Reference
(mm) 		Drill Diameter Tolerance Application Roughness of Processed Surface Ra
(μm) 		Type Trusco Code Component chip screw Component wrench Applicable Chip Weight
(kg) 		Other

MYR 5,920.31

1 Piece(s) 9 Day(s) 32164general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]258End Mill ShankNA16018840-+0.933.788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 32.5101general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]196End Mill ShankNA9812640-+0.834.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.1ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 3370general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]165End Mill ShankNA669540-+0.834.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.1ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 33103general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]198End Mill ShankNA9912840-+0.834.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 33136general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]231End Mill ShankNA13216140-+0.834.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.3ISO 9766 Compliant

MYR 5,920.31

1 Piece(s) 10 Day(s) 33169general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]264End Mill ShankNA16519440-+0.834.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 33.5105general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]200End Mill ShankNA10113040-+0.734.988+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 3473general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]168End Mill ShankNA689840-+0.635.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.1ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 34106general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]201End Mill ShankNA10213140-+0.635.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 34140general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]235End Mill ShankNA13616540-+0.635.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.3ISO 9766 Compliant

MYR 5,920.31

1 Piece(s) 10 Day(s) 34175general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]270End Mill ShankNA17020040-+0.635.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 34.5108general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]204End Mill ShankNA10413440-+0.635.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 3575general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]171End Mill ShankNA7010140-+0.53688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.1ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 35109general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]205End Mill ShankNA10513540-+0.53688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 35144general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]240End Mill ShankNA14017040-+0.53688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.4ISO 9766 Compliant

MYR 5,920.31

1 Piece(s) 8 Day(s) 35180general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]276End Mill ShankNA17520640-+0.53688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.4ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 35.5111general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]207End Mill ShankNA10713740-+0.436.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.3ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 3677general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]174End Mill ShankNA7210440-+1.438.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.2ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 36112general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]209End Mill ShankNA10813940-+1.438.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.3ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 36148general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]245End Mill ShankNA14417540-+1.438.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.4ISO 9766 Compliant

MYR 5,920.31

1 Piece(s) 10 Day(s) 36185general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]282End Mill ShankNA18021240-+1.438.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.4ISO 9766 Compliant

MYR 4,684.21

1 Piece(s) 10 Day(s) 3778general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]175End Mill ShankNA7410540-+1.339.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.2ISO 9766 Compliant

MYR 4,929.06

1 Piece(s) 10 Day(s) 37115general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]212End Mill ShankNA11114240-+1.339.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.3ISO 9766 Compliant

MYR 5,663.66

1 Piece(s) 10 Day(s) 37152general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]249End Mill ShankNA14817940-+1.339.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.5ISO 9766 Compliant

MYR 6,152.51

1 Piece(s) 10 Day(s) 37189general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]286End Mill ShankNA18521640-+1.339.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.5ISO 9766 Compliant

MYR 4,684.21

1 Piece(s) 10 Day(s) 3880general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]178End Mill ShankNA7610840-+1.140.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.2ISO 9766 Compliant

MYR 4,929.06

1 Piece(s) 10 Day(s) 38118general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]216End Mill ShankNA11414640-+1.140.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.4ISO 9766 Compliant

MYR 5,663.66

1 Piece(s) 10 Day(s) 38156general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]254End Mill ShankNA15218440-+1.140.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.5ISO 9766 Compliant

MYR 6,152.51

1 Piece(s) 10 Day(s) 38194general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]292End Mill ShankNA19022240-+1.140.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.5ISO 9766 Compliant

MYR 4,684.21

1 Piece(s) 10 Day(s) 3982general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]178End Mill ShankNA7811040-+1.04188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.2ISO 9766 Compliant

MYR 4,929.06

1 Piece(s) 10 Day(s) 39121general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]219End Mill ShankNA11714940-+1.04188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.4ISO 9766 Compliant

MYR 5,663.66

1 Piece(s) 10 Day(s) 39160general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]258End Mill ShankNA15618840-+1.04188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.6ISO 9766 Compliant

MYR 6,152.51

1 Piece(s) 10 Day(s) 39200general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]298End Mill ShankNA19522840-+1.04188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.6ISO 9766 Compliant

MYR 4,684.21

1 Piece(s) 10 Day(s) 4084general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]183straight shankNA8011340-+0.941.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.3ISO 9766 Compliant

MYR 4,929.06

1 Piece(s) 10 Day(s) 40124general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]223straight shankNA12015340-+0.941.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.5ISO 9766 Compliant

MYR 5,663.66

1 Piece(s) 10 Day(s) 40164general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]263straight shankNA16019340-+0.941.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.7ISO 9766 Compliant

MYR 6,152.51

1 Piece(s) 10 Day(s) 40205general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]304straight shankNA20023440-+0.941.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.7ISO 9766 Compliant

MYR 4,684.21

1 Piece(s) 10 Day(s) 4187general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]187End Mill ShankNA8211740-+0.842.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.3ISO 9766 Compliant

MYR 4,929.06

1 Piece(s) 10 Day(s) 41127general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]227End Mill ShankNA12015740-+0.842.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.5ISO 9766 Compliant

MYR 5,663.66

1 Piece(s) 10 Day(s) 41168general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]268End Mill ShankNA16419840-+0.842.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.7ISO 9766 Compliant

MYR 6,152.51

1 Piece(s) 10 Day(s) 41210general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]310End Mill ShankNA20524040-+0.842.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.7ISO 9766 Compliant

MYR 5,036.43

1 Piece(s) 10 Day(s) 4289general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]189End Mill ShankNA8411940-+0.943.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.4ISO 9766 Compliant

MYR 5,305.33

1 Piece(s) 10 Day(s) 42130general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]230End Mill ShankNA12616040-+0.643.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.6ISO 9766 Compliant

MYR 6,096.25

1 Piece(s) 10 Day(s) 42172general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]282End Mill ShankNA16820250-+0.643.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C2.4ISO 9766 Compliant

MYR 6,605.00

1 Piece(s) 10 Day(s) 42215general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]325End Mill ShankNA21024550-+0.643.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C2.4ISO 9766 Compliant

MYR 5,036.43

1 Piece(s) 10 Day(s) 4391general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]192End Mill ShankNA8612240-+0.54488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.4ISO 9766 Compliant

MYR 5,305.33

1 Piece(s) 10 Day(s) 43133general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]234End Mill ShankNA12916440-+0.54488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C1.6ISO 9766 Compliant

MYR 6,096.25

1 Piece(s) 10 Day(s) 43176general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]287End Mill ShankNA17220750-+0.54488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C2.5ISO 9766 Compliant

MYR 6,605.00

1 Piece(s) 10 Day(s) 43220general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]331End Mill ShankNA21525150-+0.54488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-07…P/C2.5ISO 9766 Compliant

MYR 5,036.43

1 Piece(s) 10 Day(s) 4493general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]194End Mill ShankNA8812440-+1.54788+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.4ISO 9766 Compliant

MYR 5,305.33

1 Piece(s) 10 Day(s) 44136general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]237End Mill ShankNA13216740-+1.54788+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.7ISO 9766 Compliant

MYR 6,096.25

1 Piece(s) 10 Day(s) 44180general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]291End Mill ShankNA17621150-+1.54788+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.6ISO 9766 Compliant

MYR 5,036.43

1 Piece(s) 10 Day(s) 4595general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]197End Mill ShankNA9012740-+1.447.888+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.5ISO 9766 Compliant

MYR 5,305.33

1 Piece(s) 10 Day(s) 45140general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]242End Mill ShankNA13517240-+1.447.888+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.7ISO 9766 Compliant

MYR 6,096.25

1 Piece(s) 10 Day(s) 45185general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]297End Mill ShankNA18021750-+1.447.888+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.6ISO 9766 Compliant

MYR 5,036.43

1 Piece(s) 10 Day(s) 4697general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]200End Mill ShankNA9213040-+1.348.688+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.5ISO 9766 Compliant

MYR 5,305.33

1 Piece(s) 10 Day(s) 46143general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]246End Mill ShankNA13817640-+1.348.688+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.8ISO 9766 Compliant

MYR 6,096.25

1 Piece(s) 10 Day(s) 46189general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]302End Mill ShankNA18422250-+1.348.688+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.7ISO 9766 Compliant

MYR 5,036.43

1 Piece(s) 10 Day(s) 4799general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]202End Mill ShankNA9413240-+1.149.288+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.8ISO 9766 Compliant

MYR 5,305.33

1 Piece(s) 10 Day(s) 47146general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]249End Mill ShankNA14117940-+1.149.288+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.1ISO 9766 Compliant

MYR 6,096.25

1 Piece(s) 10 Day(s) 47193general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]306End Mill ShankNA18822650-+1.149.288+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.8ISO 9766 Compliant

MYR 5,036.43

1 Piece(s) 10 Day(s) 48101general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]205End Mill ShankNA9613540-+1.05088+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.9ISO 9766 Compliant

MYR 5,305.33

1 Piece(s) 10 Day(s) 48149general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]253End Mill ShankNA14418340-+1.05088+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.2ISO 9766 Compliant

MYR 6,096.25

1 Piece(s) 10 Day(s) 48197general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]311End Mill ShankNA19223150-+1.05088+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.9ISO 9766 Compliant

MYR 5,581.40

1 Piece(s) 10 Day(s) 49103general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]207End Mill ShankNA9813740-+0.950.888+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C1.9ISO 9766 Compliant

MYR 5,870.31

1 Piece(s) 10 Day(s) 49152general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]256End Mill ShankNA14718640-+0.950.888+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.3ISO 9766 Compliant

MYR 6,730.15

1 Piece(s) 10 Day(s) 49201general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]315End Mill ShankNA19623550-+0.950.888+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C3ISO 9766 Compliant

MYR 5,581.40

1 Piece(s) 10 Day(s) 50105general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]210End Mill ShankNA10014040-+0.851.688+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.0ISO 9766 Compliant

MYR 5,870.31

1 Piece(s) 10 Day(s) 50155general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]260End Mill ShankNA15019040-+0.851.688+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.3ISO 9766 Compliant

MYR 6,730.15

1 Piece(s) 10 Day(s) 50205general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]320straight shankNA20024050-+0.851.688+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C3.1ISO 9766 Compliant

MYR 5,581.40

1 Piece(s) 10 Day(s) 51108general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]214End Mill ShankNA10214440-+0.652.288+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.1ISO 9766 Compliant

MYR 5,870.31

1 Piece(s) 10 Day(s) 51158general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]264End Mill ShankNA15319440-+0.652.288+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.4ISO 9766 Compliant

MYR 6,730.15

1 Piece(s) 10 Day(s) 51209general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]325End Mill ShankNA20424550-+0.652.288+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C3.2ISO 9766 Compliant

MYR 5,581.40

1 Piece(s) 10 Day(s) 52110general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]216End Mill ShankNA10414640-+0.55388+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.1ISO 9766 Compliant

MYR 5,870.31

1 Piece(s) 10 Day(s) 52161general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]267End Mill ShankNA15619740-+0.55388+0.28/0+0.25/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C2.5ISO 9766 Compliant

MYR 6,730.15

1 Piece(s) 10 Day(s) 52213general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]329End Mill ShankNA20824950-+0.55388+0.43/0+0.29/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-08…P/C3.3ISO 9766 Compliant

MYR 5,581.40

1 Piece(s) 10 Day(s) 53112general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]219End Mill ShankNA10614940-+2.05788+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.2ISO 9766 Compliant

MYR 5,870.31

1 Piece(s) 10 Day(s) 53164general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]271End Mill ShankNA15920140-+2.05788+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.6ISO 9766 Compliant

MYR 5,581.40

1 Piece(s) 10 Day(s) 54114general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]221End Mill ShankNA10815140-+1.957.888+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.2ISO 9766 Compliant

MYR 5,870.31

1 Piece(s) 10 Day(s) 54167general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]274End Mill ShankNA16220440-+1.957.888+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.7ISO 9766 Compliant

MYR 5,581.40

1 Piece(s) 10 Day(s) 55116general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]224End Mill ShankNA11015440-+1.758.488+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.3ISO 9766 Compliant

MYR 5,870.31

1 Piece(s) 10 Day(s) 55171general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]279End Mill ShankNA16520940-+1.758.488+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.8ISO 9766 Compliant

MYR 5,762.88

1 Piece(s) 10 Day(s) 56118general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]227End Mill ShankNA11215740-+1.659.288+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.4ISO 9766 Compliant

MYR 6,064.06

1 Piece(s) 10 Day(s) 56174general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]283End Mill ShankNA16821340-+1.659.288+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.9ISO 9766 Compliant

MYR 5,762.88

1 Piece(s) 10 Day(s) 57120general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]229End Mill ShankNA11415940-+1.56088+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.4ISO 9766 Compliant

MYR 6,064.06

1 Piece(s) 10 Day(s) 57177general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]286End Mill ShankNA17121640-+1.56088+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C3ISO 9766 Compliant

MYR 5,762.88

1 Piece(s) 10 Day(s) 58122general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]232End Mill ShankNA11616240-+1.460.888+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.5ISO 9766 Compliant

MYR 6,064.06

1 Piece(s) 10 Day(s) 58180general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]290End Mill ShankNA17422040-+1.460.888+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C3.1ISO 9766 Compliant

MYR 5,762.88

1 Piece(s) 10 Day(s) 59124general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]234End Mill ShankNA11816440-+1.261.488+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C2.6ISO 9766 Compliant

MYR 6,064.06

1 Piece(s) 10 Day(s) 59183general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]293End Mill ShankNA17722340-+1.261.488+0.30/0+0.28/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8345680 046-02(15IP)880-09…P/C3.2ISO 9766 Compliant

Loading...

  1. << Prev
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7
  7. Next >>

Configure

Clear All

1,013 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Hole diameter (drill diameter) D(mm)

    • 12.5
    • 12.7
    • 13
    • 13.5
    • 14
    • 14.5
    • 15
    • 15.5
    • 16
    • 16.5
    • 17
    • 17.5
    • 18
    • 18.5
    • 19
    • 19.5
    • 20
    • 20.5
    • 20.9
    • 21
    • 21.5
    • 22
    • 22.5
    • 23
    • 23.5
    • 23.9
    • 24
    • 24.5
    • 25
    • 25.5
    • 26
    • 26.4
    • 26.5
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.5
    • 30
    • 30.5
    • 31
    • 31.5
    • 32
    • 32.5
    • 33
    • 33.5
    • 34
    • 34.5
    • 35
    • 35.5
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63

    Clear

  • Groove Length L(mm)

    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 48
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 103
    • 104
    • 105
    • 106
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 116
    • 118
    • 119
    • 120
    • 121
    • 122
    • 124
    • 126
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 133
    • 136
    • 138
    • 140
    • 143
    • 144
    • 146
    • 148
    • 149
    • 152
    • 154
    • 155
    • 156
    • 158
    • 159
    • 160
    • 161
    • 164
    • 167
    • 168
    • 169
    • 171
    • 172
    • 174
    • 175
    • 176
    • 177
    • 180
    • 183
    • 185
    • 186
    • 189
    • 190
    • 193
    • 194
    • 196
    • 197
    • 200
    • 201
    • 205
    • 209
    • 210
    • 213
    • 215
    • 220

    Clear

  • work material

    • general steel
    • high hardness steel
    • Stainless Steel
    • Cast Iron
    • Aluminum
    • Titanium

    Clear

  • Overall Length L(mm)

    • 91
    • 92
    • 93
    • 95
    • 96
    • 97
    • 99
    • 101
    • 102
    • 103
    • 105
    • 108
    • 110
    • 111
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 119
    • 120
    • 122
    • 125
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 135
    • 136
    • 137
    • 138
    • 139
    • 140
    • 142
    • 143
    • 144
    • 145
    • 146
    • 147
    • 148
    • 149
    • 151
    • 153
    • 155
    • 156
    • 157
    • 160
    • 161
    • 162
    • 163
    • 164
    • 165
    • 168
    • 169
    • 170
    • 171
    • 172
    • 174
    • 175
    • 177
    • 178
    • 180
    • 182
    • 183
    • 187
    • 188
    • 189
    • 191
    • 192
    • 194
    • 196
    • 197
    • 198
    • 199
    • 200
    • 201
    • 202
    • 204
    • 205
    • 207
    • 209
    • 210
    • 212
    • 214
    • 216
    • 219
    • 221
    • 222
    • 223
    • 224
    • 225
    • 226
    • 227
    • 229
    • 230
    • 231
    • 232
    • 234
    • 235
    • 237
    • 240
    • 241
    • 242
    • 243
    • 245
    • 246
    • 249
    • 253
    • 254
    • 256
    • 258
    • 260
    • 263
    • 264
    • 267
    • 268
    • 270
    • 271
    • 274
    • 276
    • 279
    • 282
    • 283
    • 286
    • 287
    • 290
    • 291
    • 292
    • 293
    • 297
    • 298
    • 302
    • 304
    • 305
    • 306
    • 309
    • 310
    • 311
    • 315
    • 320
    • 325
    • 329
    • 331

    Clear

  • Shank Type

    • End Mill Shank
    • straight shank

    Clear

  • With/without Oil Hole

    • NA

    Clear

  • Maximum Machining Depth(mm)

    • 25
    • 26
    • 27
    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 50
    • 51
    • 52
    • 53
    • 54
    • 56
    • 57
    • 58
    • 59
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 68
    • 69
    • 70
    • 71
    • 72
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 104
    • 105
    • 106
    • 107
    • 108
    • 110
    • 111
    • 112
    • 114
    • 116
    • 117
    • 118
    • 120
    • 122
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 132
    • 135
    • 136
    • 138
    • 140
    • 141
    • 144
    • 146
    • 147
    • 148
    • 150
    • 152
    • 153
    • 155
    • 156
    • 159
    • 160
    • 162
    • 164
    • 165
    • 168
    • 170
    • 171
    • 172
    • 174
    • 175
    • 176
    • 177
    • 180
    • 183
    • 184
    • 185
    • 186
    • 188
    • 189
    • 190
    • 192
    • 195
    • 196
    • 200
    • 204
    • 205
    • 208
    • 210
    • 215

    Clear

  • Program Length(mm)

    • 41
    • 42
    • 43
    • 44
    • 46
    • 47
    • 49
    • 51
    • 52
    • 53
    • 55
    • 56
    • 57
    • 58
    • 60
    • 61
    • 62
    • 64
    • 66
    • 68
    • 69
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 81
    • 82
    • 84
    • 86
    • 87
    • 89
    • 90
    • 91
    • 92
    • 93
    • 95
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 103
    • 104
    • 105
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 117
    • 118
    • 119
    • 121
    • 122
    • 124
    • 126
    • 127
    • 128
    • 130
    • 131
    • 132
    • 134
    • 135
    • 137
    • 138
    • 139
    • 140
    • 141
    • 142
    • 143
    • 144
    • 146
    • 147
    • 149
    • 151
    • 152
    • 153
    • 154
    • 156
    • 157
    • 159
    • 160
    • 161
    • 162
    • 164
    • 165
    • 167
    • 170
    • 171
    • 172
    • 173
    • 175
    • 176
    • 177
    • 179
    • 183
    • 184
    • 186
    • 188
    • 190
    • 193
    • 194
    • 197
    • 198
    • 200
    • 201
    • 202
    • 204
    • 206
    • 207
    • 209
    • 211
    • 212
    • 213
    • 216
    • 217
    • 220
    • 222
    • 223
    • 226
    • 227
    • 228
    • 231
    • 232
    • 234
    • 235
    • 239
    • 240
    • 245
    • 249
    • 251

    Clear

  • Shank type(mm)

    • 20
    • 25
    • 32
    • 40
    • 50

    Clear

  • Screw pilot hole size

    • M16
    • M18
    • M20
    • M22
    • M24
    • M27
    • M30
    • M33

    Clear

  • Radial Direction Adjustment Amount (max)

    • +0.25
    • +0.3
    • +0.4
    • +0.45
    • +0.5
    • +0.6
    • +0.7
    • +0.8
    • +0.9
    • +1.0
    • +1.1
    • +1.2
    • +1.3
    • +1.4
    • +1.5
    • +1.6
    • +1.7
    • +1.9
    • +2.0

    Clear

  • Maximum Diameter(mm)

    • 13
    • 13.2
    • 13.5
    • 14
    • 15
    • 15.4
    • 15.8
    • 16.1
    • 16.6
    • 17.7
    • 18.2
    • 18.5
    • 18.8
    • 19.3
    • 19.6
    • 20.1
    • 21.8
    • 22.2
    • 22.4
    • 22.6
    • 22.9
    • 23.2
    • 23.3
    • 23.5
    • 24
    • 24.3
    • 24.5
    • 26.2
    • 26.5
    • 27
    • 27.3
    • 27.8
    • 28
    • 28.1
    • 28.4
    • 28.7
    • 29.2
    • 29.5
    • 30
    • 30.2
    • 30.3
    • 32.2
    • 32.6
    • 33
    • 33.4
    • 33.7
    • 34.1
    • 34.5
    • 34.9
    • 35.3
    • 35.6
    • 36
    • 36.4
    • 38.8
    • 39.5
    • 40.3
    • 41
    • 41.8
    • 42.5
    • 43.3
    • 44
    • 47
    • 47.8
    • 48.6
    • 49.2
    • 50
    • 50.8
    • 51.6
    • 52.2
    • 53
    • 57
    • 57.8
    • 58.4
    • 59.2
    • 60
    • 60.8
    • 61.4
    • 62.2
    • 63
    • 63.6
    • 64.4

    Clear

  • Tip angle(°)

    • 79
    • 88

    Clear

  • Machining Tolerance Reference(mm)

    • +0.25/0
    • +0.28/0
    • +0.30/0
    • +0.40/0
    • +0.43/0

    Clear

  • Drill Diameter Tolerance

    • +0.20/0
    • +0.24/+0.04
    • +0.25/0
    • +0.28/0
    • +0.29/+0.04

    Clear

  • Application

    • General Drilling

    Clear

  • Roughness of Processed Surface Ra(μm)

    • 1~5

    Clear

  • Type

    • Shank with Flat Chamfered Cylinder

    Clear

  • Trusco Code

    • 570-8338

    Clear

  • type

    • 131
    • 132
    • 151
    • 15□
    • 254R/LKF
    • 266
    • 266RKF
    • 26□
    • 321
    • 345
    • 392
    • 393
    • 3□□
    • 3□□□
    • 490
    • 4□□
    • 570
    • 5□□
    • 8800□□□
    • 8□□
    • A-K/M
    • A-T
    • A1B
    • A1F
    • A2
    • A32T
    • A4
    • A5
    • A□□□
    • C3
    • C4
    • C5
    • C6
    • C8
    • DD
    • E□□
    • LA
    • LF
    • LG
    • LX
    • L□□□
    • MB
    • MS
    • NF
    • N□□□
    • R/LX123
    • R1□□
    • R260.8
    • R2□□
    • R3□□
    • R5□□

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 10 Day(s) or Less
    • 11 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.