(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.　

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Super U Drill (Corodrill 880) (Part Numbers)

Super U Drill (Corodrill 880)
  • Volume Discount

SANDVIK

SANDVIK

A Blade Tip Replacement Type Insert Drill With High Productivity

Part Number

Configured Part Number is shown.

30
60
90
  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next >>
Part Number
880-D1700L20-03
880-D1700L20-04
880-D1700L20-05
880-D1750L25-02
880-D1750L25-03
880-D1750L25-04
880-D1750L25-05
880-D1800L25-02
880-D1800L25-03
880-D1800L25-04
880-D1800L25-05
880-D1850L25-02
880-D1850L25-03
880-D1850L25-04
880-D1850L25-05
880-D1900L25-02
880-D1900L25-03
880-D1900L25-04
880-D1900L25-05
880-D1950L25-02
880-D1950L25-03
880-D1950L25-04
880-D1950L25-05
880-D2000L25-02
880-D2000L25-03
880-D2000L25-04
880-D2000L25-05
880-D2050L25-03
880-D2090L25-03
880-D2100L25-02
880-D2100L25-03
880-D2100L25-04
880-D2100L25-05
880-D2150L25-03
880-D2200L25-02
880-D2200L25-03
880-D2200L25-04
880-D2200L25-05
880-D2250L25-03
880-D2300L25-02
880-D2300L25-03
880-D2300L25-04
880-D2300L25-05
880-D2350L25-03
880-D2390L25-03
880-D2400L25-02
880-D2400L25-03
880-D2400L25-04
880-D2400L25-05
880-D2450L25-03
880-D2500L25-02
880-D2500L25-03
880-D2500L25-04
880-D2500L25-05
880-D2550L25-03
880-D2600L32-02
880-D2600L32-03
880-D2600L32-04
880-D2600L32-05
880-D2640L32-03
880-D2650L32-03
880-D2700L32-02
880-D2700L32-03
880-D2700L32-04
880-D2700L32-05
880-D2750L32-03
880-D2800L32-02
880-D2800L32-03
880-D2800L32-04
880-D2800L32-05
880-D2850L32-03
880-D2900L32-02
880-D2900L32-03
880-D2900L32-04
880-D2900L32-05
880-D2940L32-03
880-D2950L32-03
880-D3000L32-02
880-D3000L32-03
880-D3000L32-04
880-D3000L32-05
880-D3050L32-03
880-D3100L40-02
880-D3100L40-03
880-D3100L40-04
880-D3100L40-05
880-D3150L40-03
880-D3200L40-02
880-D3200L40-03
880-D3200L40-04
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm) 		Groove Length L
(mm) 		work material Overall Length L
(mm) 		Shank Type With/without Oil Hole Maximum Machining Depth
(mm) 		Program Length
(mm) 		Shank type
(mm) 		Screw pilot hole size Radial Direction Adjustment Amount (max) Maximum Diameter
(mm) 		Tip angle
(°) 		Machining Tolerance Reference
(mm) 		Drill Diameter Tolerance Application Roughness of Processed Surface Ra
(μm) 		Type Trusco Code Component chip screw Component wrench Applicable Chip Weight
(kg) 		Other

MYR 3,411.75

1 Piece(s) 10 Day(s) 1754general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]119End Mill ShankNA516920-+0.618.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 1771general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]136End Mill ShankNA688620-+0.618.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 1788general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]153End Mill ShankNA8510320-+0.618.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 17.539general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]111End Mill ShankNA355525M20+0.518.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 17.556general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]128End Mill ShankNA537225M20+0.518.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 17.573general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]145End Mill ShankNA708925M20+0.518.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 17.591general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]163End Mill ShankNA8810725-+0.518.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 1840general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]112End Mill ShankNA365625-+0.418.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 1857general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]129End Mill ShankNA547325-+0.418.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 1875general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]147End Mill ShankNA729125-+0.418.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 1893general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]165End Mill ShankNA9010925-+0.418.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 18.541general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]113End Mill ShankNA375725-+0.419.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 18.559general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]131End Mill ShankNA567525-+0.419.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 18.577general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]149End Mill ShankNA749325-+0.419.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 18.596general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]168End Mill ShankNA9311225-+0.419.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 1942general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]114End Mill ShankNA385825-+0.319.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 1960general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]132End Mill ShankNA577625-+0.319.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 1979general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]151End Mill ShankNA769525-+0.319.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 1998general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]170End Mill ShankNA9511425-+0.319.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 19.543general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]116End Mill ShankNA396025M22+0.320.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 19.562general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]135End Mill ShankNA597925M22+0.320.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 19.582general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]155End Mill ShankNA789925M22+0.320.188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 19.5101general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]174End Mill ShankNA9711825-+0.320.188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 2044general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]117End Mill ShankNA406125-+0.921.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2064general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]137End Mill ShankNA608125-+0.921.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 2084general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]157End Mill ShankNA8010125-+0.921.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 20104general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]177End Mill ShankNA10012125-+0.921.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 20.565general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]138End Mill ShankNA628225-+0.822.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 20.966general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]140End Mill ShankNA638425M24+0.822.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,622.71

1 Piece(s) 10 Day(s) 2146general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]120End Mill ShankNA426425-+0.822.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2166general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]140End Mill ShankNA638425-+0.822.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2187general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]161End Mill ShankNA8410525-+0.822.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 21108general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]182End Mill ShankNA10512625-+0.822.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 21.568general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]142End Mill ShankNA658625-+0.722.988+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,622.71

1 Piece(s) 10 Day(s) 2248general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]122End Mill ShankNA446625-+0.623.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2269general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]143End Mill ShankNA668725-+0.623.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2291general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]165End Mill ShankNA8810925-+0.623.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 22113general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]187End Mill ShankNA11013125-+0.523.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 22.571general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]146End Mill ShankNA689025-+0.523.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2350general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]125End Mill ShankNA466925-+0.52488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2372general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]147End Mill ShankNA699125-+0.52488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2395general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]170End Mill ShankNA9211425-+0.52488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 23119general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]194End Mill ShankNA11613825-+0.52488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 23.574general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]149End Mill ShankNA719325-+0.424.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 23.976general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]151End Mill ShankNA729525M27+0.324.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2452general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]127End Mill ShankNA487125-+1.126.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2476general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]151End Mill ShankNA729525-+1.126.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 24100general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]175End Mill ShankNA9611925-+1.126.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 24124general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]199End Mill ShankNA12014325-+1.126.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 24.577general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]153End Mill ShankNA749725-+1.026.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2554general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]130straight shankNA507425-+1.02788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2579general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]155straight shankNA759925-+1.02788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 25104general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]180straight shankNA10012425-+1.02788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 25129general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]205straight shankNA12514925-+1.02788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 25.580general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]156End Mill ShankNA7710025-+0.927.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 2656general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]137End Mill ShankNA527732-+0.927.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2681general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]162End Mill ShankNA7810232-+0.927.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 5,011.18

1 Piece(s) 10 Day(s) 26107general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]188End Mill ShankNA10412832-+0.927.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 26133general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]214End Mill ShankNA13015432-+0.927.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 26.483general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]164End Mill ShankNA7910432M30+0.82888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 26.583general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]164End Mill ShankNA8010432-+0.828.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 2758general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]139End Mill ShankNA547932-+0.728.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2784general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]165End Mill ShankNA8110532-+0.728.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 5,011.18

1 Piece(s) 10 Day(s) 27111general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]192End Mill ShankNA10813232-+0.728.488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 27138general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]219End Mill ShankNA13515932-+0.728.488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 27.586general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]168End Mill ShankNA8310832-+0.628.788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.5ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 2860general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]142End Mill ShankNA568232-+0.629.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2887general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]169End Mill ShankNA8410932-+0.629.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 5,011.18

1 Piece(s) 10 Day(s) 28115general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]197End Mill ShankNA11213732-+0.629.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 28143general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]225End Mill ShankNA14016532-+0.629.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 28.589general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]171End Mill ShankNA8611132-+0.529.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 2962general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]144End Mill ShankNA588432-+0.53088+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2990general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]172End Mill ShankNA8711232-+0.53088+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 5,011.18

1 Piece(s) 10 Day(s) 29119general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]201End Mill ShankNA11614132-+0.53088+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 29149general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]231End Mill ShankNA14617132-+0.53088+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2992general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]175End Mill ShankNA8811532M33+0.430.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 29.592general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]175End Mill ShankNA8911532-+0.430.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.6ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 3064general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]147End Mill ShankNA608740-+1.132.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C0.6ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 3094general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]177End Mill ShankNA9011732-+1.132.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C0.7ISO 9766 Compliant

MYR 5,011.18

1 Piece(s) 10 Day(s) 30124general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]207End Mill ShankNA12014732-+1.132.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C0.8ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 30154general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]237End Mill ShankNA15017732-+1.132.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C0.8ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 30.595general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]178End Mill ShankNA9211832-+1.132.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C0.7ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 3166general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]160End Mill ShankNA629040-+1.03388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 3197general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]191End Mill ShankNA9312140-+1.03388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.1ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 31128general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]222End Mill ShankNA12415240-+1.03388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 5,920.31

1 Piece(s) 10 Day(s) 31159general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]253End Mill ShankNA15518340-+1.03388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 31.598general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]192End Mill ShankNA9512240-+0.933.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.1ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 3268general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]162End Mill ShankNA649240-+0.933.788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 32100general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]194End Mill ShankNA9612440-+0.933.788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.1ISO 9766 Compliant

MYR 5,444.00

1 Piece(s) 10 Day(s) 32132general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]226End Mill ShankNA12815640-+0.933.788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-416.1-8335680 046-05(10IP)880-06…P/C1.2ISO 9766 Compliant

Loading...

  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next >>

Configure

Clear All

1,013 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Hole diameter (drill diameter) D(mm)

    • 12.5
    • 12.7
    • 13
    • 13.5
    • 14
    • 14.5
    • 15
    • 15.5
    • 16
    • 16.5
    • 17
    • 17.5
    • 18
    • 18.5
    • 19
    • 19.5
    • 20
    • 20.5
    • 20.9
    • 21
    • 21.5
    • 22
    • 22.5
    • 23
    • 23.5
    • 23.9
    • 24
    • 24.5
    • 25
    • 25.5
    • 26
    • 26.4
    • 26.5
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.5
    • 30
    • 30.5
    • 31
    • 31.5
    • 32
    • 32.5
    • 33
    • 33.5
    • 34
    • 34.5
    • 35
    • 35.5
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63

    Clear

  • Groove Length L(mm)

    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 48
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 103
    • 104
    • 105
    • 106
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 116
    • 118
    • 119
    • 120
    • 121
    • 122
    • 124
    • 126
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 133
    • 136
    • 138
    • 140
    • 143
    • 144
    • 146
    • 148
    • 149
    • 152
    • 154
    • 155
    • 156
    • 158
    • 159
    • 160
    • 161
    • 164
    • 167
    • 168
    • 169
    • 171
    • 172
    • 174
    • 175
    • 176
    • 177
    • 180
    • 183
    • 185
    • 186
    • 189
    • 190
    • 193
    • 194
    • 196
    • 197
    • 200
    • 201
    • 205
    • 209
    • 210
    • 213
    • 215
    • 220

    Clear

  • work material

    • general steel
    • high hardness steel
    • Stainless Steel
    • Cast Iron
    • Aluminum
    • Titanium

    Clear

  • Overall Length L(mm)

    • 91
    • 92
    • 93
    • 95
    • 96
    • 97
    • 99
    • 101
    • 102
    • 103
    • 105
    • 108
    • 110
    • 111
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 119
    • 120
    • 122
    • 125
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 135
    • 136
    • 137
    • 138
    • 139
    • 140
    • 142
    • 143
    • 144
    • 145
    • 146
    • 147
    • 148
    • 149
    • 151
    • 153
    • 155
    • 156
    • 157
    • 160
    • 161
    • 162
    • 163
    • 164
    • 165
    • 168
    • 169
    • 170
    • 171
    • 172
    • 174
    • 175
    • 177
    • 178
    • 180
    • 182
    • 183
    • 187
    • 188
    • 189
    • 191
    • 192
    • 194
    • 196
    • 197
    • 198
    • 199
    • 200
    • 201
    • 202
    • 204
    • 205
    • 207
    • 209
    • 210
    • 212
    • 214
    • 216
    • 219
    • 221
    • 222
    • 223
    • 224
    • 225
    • 226
    • 227
    • 229
    • 230
    • 231
    • 232
    • 234
    • 235
    • 237
    • 240
    • 241
    • 242
    • 243
    • 245
    • 246
    • 249
    • 253
    • 254
    • 256
    • 258
    • 260
    • 263
    • 264
    • 267
    • 268
    • 270
    • 271
    • 274
    • 276
    • 279
    • 282
    • 283
    • 286
    • 287
    • 290
    • 291
    • 292
    • 293
    • 297
    • 298
    • 302
    • 304
    • 305
    • 306
    • 309
    • 310
    • 311
    • 315
    • 320
    • 325
    • 329
    • 331

    Clear

  • Shank Type

    • End Mill Shank
    • straight shank

    Clear

  • With/without Oil Hole

    • NA

    Clear

  • Maximum Machining Depth(mm)

    • 25
    • 26
    • 27
    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 50
    • 51
    • 52
    • 53
    • 54
    • 56
    • 57
    • 58
    • 59
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 68
    • 69
    • 70
    • 71
    • 72
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 104
    • 105
    • 106
    • 107
    • 108
    • 110
    • 111
    • 112
    • 114
    • 116
    • 117
    • 118
    • 120
    • 122
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 132
    • 135
    • 136
    • 138
    • 140
    • 141
    • 144
    • 146
    • 147
    • 148
    • 150
    • 152
    • 153
    • 155
    • 156
    • 159
    • 160
    • 162
    • 164
    • 165
    • 168
    • 170
    • 171
    • 172
    • 174
    • 175
    • 176
    • 177
    • 180
    • 183
    • 184
    • 185
    • 186
    • 188
    • 189
    • 190
    • 192
    • 195
    • 196
    • 200
    • 204
    • 205
    • 208
    • 210
    • 215

    Clear

  • Program Length(mm)

    • 41
    • 42
    • 43
    • 44
    • 46
    • 47
    • 49
    • 51
    • 52
    • 53
    • 55
    • 56
    • 57
    • 58
    • 60
    • 61
    • 62
    • 64
    • 66
    • 68
    • 69
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 81
    • 82
    • 84
    • 86
    • 87
    • 89
    • 90
    • 91
    • 92
    • 93
    • 95
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 103
    • 104
    • 105
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 117
    • 118
    • 119
    • 121
    • 122
    • 124
    • 126
    • 127
    • 128
    • 130
    • 131
    • 132
    • 134
    • 135
    • 137
    • 138
    • 139
    • 140
    • 141
    • 142
    • 143
    • 144
    • 146
    • 147
    • 149
    • 151
    • 152
    • 153
    • 154
    • 156
    • 157
    • 159
    • 160
    • 161
    • 162
    • 164
    • 165
    • 167
    • 170
    • 171
    • 172
    • 173
    • 175
    • 176
    • 177
    • 179
    • 183
    • 184
    • 186
    • 188
    • 190
    • 193
    • 194
    • 197
    • 198
    • 200
    • 201
    • 202
    • 204
    • 206
    • 207
    • 209
    • 211
    • 212
    • 213
    • 216
    • 217
    • 220
    • 222
    • 223
    • 226
    • 227
    • 228
    • 231
    • 232
    • 234
    • 235
    • 239
    • 240
    • 245
    • 249
    • 251

    Clear

  • Shank type(mm)

    • 20
    • 25
    • 32
    • 40
    • 50

    Clear

  • Screw pilot hole size

    • M16
    • M18
    • M20
    • M22
    • M24
    • M27
    • M30
    • M33

    Clear

  • Radial Direction Adjustment Amount (max)

    • +0.25
    • +0.3
    • +0.4
    • +0.45
    • +0.5
    • +0.6
    • +0.7
    • +0.8
    • +0.9
    • +1.0
    • +1.1
    • +1.2
    • +1.3
    • +1.4
    • +1.5
    • +1.6
    • +1.7
    • +1.9
    • +2.0

    Clear

  • Maximum Diameter(mm)

    • 13
    • 13.2
    • 13.5
    • 14
    • 15
    • 15.4
    • 15.8
    • 16.1
    • 16.6
    • 17.7
    • 18.2
    • 18.5
    • 18.8
    • 19.3
    • 19.6
    • 20.1
    • 21.8
    • 22.2
    • 22.4
    • 22.6
    • 22.9
    • 23.2
    • 23.3
    • 23.5
    • 24
    • 24.3
    • 24.5
    • 26.2
    • 26.5
    • 27
    • 27.3
    • 27.8
    • 28
    • 28.1
    • 28.4
    • 28.7
    • 29.2
    • 29.5
    • 30
    • 30.2
    • 30.3
    • 32.2
    • 32.6
    • 33
    • 33.4
    • 33.7
    • 34.1
    • 34.5
    • 34.9
    • 35.3
    • 35.6
    • 36
    • 36.4
    • 38.8
    • 39.5
    • 40.3
    • 41
    • 41.8
    • 42.5
    • 43.3
    • 44
    • 47
    • 47.8
    • 48.6
    • 49.2
    • 50
    • 50.8
    • 51.6
    • 52.2
    • 53
    • 57
    • 57.8
    • 58.4
    • 59.2
    • 60
    • 60.8
    • 61.4
    • 62.2
    • 63
    • 63.6
    • 64.4

    Clear

  • Tip angle(°)

    • 79
    • 88

    Clear

  • Machining Tolerance Reference(mm)

    • +0.25/0
    • +0.28/0
    • +0.30/0
    • +0.40/0
    • +0.43/0

    Clear

  • Drill Diameter Tolerance

    • +0.20/0
    • +0.24/+0.04
    • +0.25/0
    • +0.28/0
    • +0.29/+0.04

    Clear

  • Application

    • General Drilling

    Clear

  • Roughness of Processed Surface Ra(μm)

    • 1~5

    Clear

  • Type

    • Shank with Flat Chamfered Cylinder

    Clear

  • Trusco Code

    • 570-8338

    Clear

  • type

    • 131
    • 132
    • 151
    • 15□
    • 254R/LKF
    • 266
    • 266RKF
    • 26□
    • 321
    • 345
    • 392
    • 393
    • 3□□
    • 3□□□
    • 490
    • 4□□
    • 570
    • 5□□
    • 8800□□□
    • 8□□
    • A-K/M
    • A-T
    • A1B
    • A1F
    • A2
    • A32T
    • A4
    • A5
    • A□□□
    • C3
    • C4
    • C5
    • C6
    • C8
    • DD
    • E□□
    • LA
    • LF
    • LG
    • LX
    • L□□□
    • MB
    • MS
    • NF
    • N□□□
    • R/LX123
    • R1□□
    • R260.8
    • R2□□
    • R3□□
    • R5□□

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 10 Day(s) or Less
    • 11 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.