(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.　

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Super U Drill (Corodrill 880) (Part Numbers)

Super U Drill (Corodrill 880)
  • Volume Discount

SANDVIK

SANDVIK

A Blade Tip Replacement Type Insert Drill With High Productivity

Part Number

Configured Part Number is shown.

30
60
90
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
880-D1250L20-02
880-D1250L20-04
880-D1250L20-05
880-D1270L20-02
880-D1300L20-02
880-D1300L20-03
880-D1300L20-04
880-D1300L20-05
880-D1350L20-02
880-D1350L20-05
880-D1400L20-02
880-D1400L20-03
880-D1400L20-04
880-D1400L20-05
880-D1450L20-02
880-D1450L20-03
880-D1450L20-04
880-D1450L20-05
880-D1500L20-02
880-D1500L20-03
880-D1500L20-04
880-D1500L20-05
880-D1550L20-02
880-D1550L20-03
880-D1550L20-04
880-D1550L20-05
880-D1600L20-02
880-D1600L20-03
880-D1600L20-04
880-D1600L20-05
880-D1650L20-02
880-D1650L20-03
880-D1650L20-04
880-D1650L20-05
880-D1700L20-02
880-D1700L20-03
880-D1700L20-04
880-D1700L20-05
880-D1750L25-02
880-D1750L25-03
880-D1750L25-04
880-D1750L25-05
880-D1800L25-02
880-D1800L25-03
880-D1800L25-04
880-D1800L25-05
880-D1850L25-02
880-D1850L25-03
880-D1850L25-04
880-D1850L25-05
880-D1900L25-02
880-D1900L25-03
880-D1900L25-04
880-D1900L25-05
880-D1950L25-02
880-D1950L25-03
880-D1950L25-04
880-D1950L25-05
880-D2000L25-02
880-D2000L25-03
880-D2000L25-04
880-D2000L25-05
880-D2050L25-03
880-D2090L25-03
880-D2100L25-02
880-D2100L25-03
880-D2100L25-04
880-D2100L25-05
880-D2150L25-03
880-D2200L25-02
880-D2200L25-03
880-D2200L25-04
880-D2200L25-05
880-D2250L25-03
880-D2300L25-02
880-D2300L25-03
880-D2300L25-04
880-D2300L25-05
880-D2350L25-03
880-D2390L25-03
880-D2400L25-02
880-D2400L25-03
880-D2400L25-04
880-D2400L25-05
880-D2450L25-03
880-D2500L25-02
880-D2500L25-03
880-D2500L25-04
880-D2500L25-05
880-D2550L25-03
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm) 		Groove Length L
(mm) 		work material Overall Length L
(mm) 		Shank Type With/without Oil Hole Maximum Machining Depth
(mm) 		Program Length
(mm) 		Shank type
(mm) 		Screw pilot hole size Radial Direction Adjustment Amount (max) Maximum Diameter
(mm) 		Tip angle
(°) 		Machining Tolerance Reference
(mm) 		Drill Diameter Tolerance Application Roughness of Processed Surface Ra
(μm) 		Type Trusco Code Component chip screw Component wrench Applicable Chip Weight
(kg) 		Other

MYR 3,242.43

1 Piece(s) 10 Day(s) 12.528general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]91End Mill ShankNA254120-+0.251379+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 12.553general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]116End Mill ShankNA506620-+0.251379+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 12.565general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]128End Mill ShankNA627820-+0.251379+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 12.728general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]91End Mill ShankNA254120-+0.2513.279+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 1329general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]92End Mill ShankNA264220-+0.2513.579+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 1342general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]105End Mill ShankNA395520-+0.2513.579+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 1355general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]118End Mill ShankNA526820-+0.2513.579+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 1368general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]131End Mill ShankNA658120-+0.2513.579+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 13.530general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]93End Mill ShankNA274320-+0.251479+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 13.571general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]134End Mill ShankNA688420-+0.251479+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-01…P/C0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 1431general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]95End Mill ShankNA284420M16+0.51588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 1445general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]108End Mill ShankNA425820M16+0.51588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 9 Day(s) 1459general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]122End Mill ShankNA567220M16+0.51588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 1473general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]136End Mill ShankNA708620-+0.51588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 14.532general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]96End Mill ShankNA294620-+0.4515.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 14.546general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]110End Mill ShankNA446020-+0.4515.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 14.561general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]125End Mill ShankNA587520-+0.4515.488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 14.575general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]139End Mill ShankNA728920-+0.4515.488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,259.66

1 Piece(s) 10 Day(s) 1533general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]97End Mill ShankNA304720-+0.415.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 1548general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]112End Mill ShankNA456220-+0.415.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 1563general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]127End Mill ShankNA607720-+0.415.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 1578general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]142End Mill ShankNA759220-+0.415.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 15.535general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]99End Mill ShankNA314920M18+0.316.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 15.550general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]114End Mill ShankNA476420M18+0.316.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 15.565general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]129End Mill ShankNA627920M18+0.316.188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 15.581general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]145End Mill ShankNA789520-+0.316.188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 1636general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]101End Mill ShankNA325120-+0.316.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 1651general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]116End Mill ShankNA486620-+0.316.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 1667general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]132End Mill ShankNA648220-+0.316.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 1683general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]148End Mill ShankNA809820-+0.316.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-285680 046-08(6IP)880-02…C/P0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 16.537general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]102End Mill ShankNA335220-+0.617.788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 16.553general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]118End Mill ShankNA506820-+0.617.788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 16.569general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]134End Mill ShankNA668420-+0.617.788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 16.586general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]151End Mill ShankNA8310120-+0.617.788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,242.43

1 Piece(s) 10 Day(s) 1738general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]103End Mill ShankNA345320-+0.618.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,411.75

1 Piece(s) 10 Day(s) 1754general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]119End Mill ShankNA516920-+0.618.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,925.48

1 Piece(s) 10 Day(s) 1771general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]136End Mill ShankNA688620-+0.618.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,264.85

1 Piece(s) 10 Day(s) 1788general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]153End Mill ShankNA8510320-+0.618.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 17.539general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]111End Mill ShankNA355525M20+0.518.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 17.556general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]128End Mill ShankNA537225M20+0.518.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 17.573general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]145End Mill ShankNA708925M20+0.518.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 17.591general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]163End Mill ShankNA8810725-+0.518.588+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 1840general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]112End Mill ShankNA365625-+0.418.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 1857general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]129End Mill ShankNA547325-+0.418.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 1875general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]147End Mill ShankNA729125-+0.418.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 1893general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]165End Mill ShankNA9010925-+0.418.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 18.541general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]113End Mill ShankNA375725-+0.419.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 18.559general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]131End Mill ShankNA567525-+0.419.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 18.577general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]149End Mill ShankNA749325-+0.419.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 18.596general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]168End Mill ShankNA9311225-+0.419.388+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 1942general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]114End Mill ShankNA385825-+0.319.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 1960general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]132End Mill ShankNA577625-+0.319.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 1979general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]151End Mill ShankNA769525-+0.319.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 1998general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]170End Mill ShankNA9511425-+0.319.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 19.543general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]116End Mill ShankNA396025M22+0.320.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 19.562general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]135End Mill ShankNA597925M22+0.320.188+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 19.582general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]155End Mill ShankNA789925M22+0.320.188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 19.5101general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]174End Mill ShankNA9711825-+0.320.188+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-335680 046-03(7IP)880-03…P/C0.2ISO 9766 Compliant

MYR 3,423.91

1 Piece(s) 10 Day(s) 2044general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]117End Mill ShankNA406125-+0.921.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2064general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]137End Mill ShankNA608125-+0.921.888+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,145.15

1 Piece(s) 10 Day(s) 2084general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]157End Mill ShankNA8010125-+0.921.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,502.73

1 Piece(s) 10 Day(s) 20104general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]177End Mill ShankNA10012125-+0.921.888+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 20.565general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]138End Mill ShankNA628225-+0.822.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 20.966general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]140End Mill ShankNA638425M24+0.822.488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,622.71

1 Piece(s) 10 Day(s) 2146general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]120End Mill ShankNA426425-+0.822.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2166general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]140End Mill ShankNA638425-+0.822.688+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2187general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]161End Mill ShankNA8410525-+0.822.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 21108general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]182End Mill ShankNA10512625-+0.822.688+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 21.568general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]142End Mill ShankNA658625-+0.722.988+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,622.71

1 Piece(s) 10 Day(s) 2248general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]122End Mill ShankNA446625-+0.623.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2269general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]143End Mill ShankNA668725-+0.623.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2291general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]165End Mill ShankNA8810925-+0.623.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 22113general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]187End Mill ShankNA11013125-+0.523.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 22.571general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]146End Mill ShankNA689025-+0.523.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2350general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]125End Mill ShankNA466925-+0.52488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2372general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]147End Mill ShankNA699125-+0.52488+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 2395general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]170End Mill ShankNA9211425-+0.52488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 23119general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]194End Mill ShankNA11613825-+0.52488+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 23.574general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]149End Mill ShankNA719325-+0.424.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 23.976general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]151End Mill ShankNA729525M27+0.324.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-585680 046-03(7IP)880-04…P/C0.3ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2452general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]127End Mill ShankNA487125-+1.126.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2476general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]151End Mill ShankNA729525-+1.126.288+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 24100general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]175End Mill ShankNA9611925-+1.126.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 24124general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]199End Mill ShankNA12014325-+1.126.288+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 24.577general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]153End Mill ShankNA749725-+1.026.588+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,605.56

1 Piece(s) 10 Day(s) 2554general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]130straight shankNA507425-+1.02788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 3,794.06

1 Piece(s) 10 Day(s) 2579general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]155straight shankNA759925-+1.02788+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 25104general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]180straight shankNA10012425-+1.02788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,735.31

1 Piece(s) 10 Day(s) 25129general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]205straight shankNA12514925-+1.02788+0.40/0+0.24/+0.04General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

MYR 4,358.90

1 Piece(s) 10 Day(s) 25.580general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]156End Mill ShankNA7710025-+0.927.388+0.25/0+0.20/0General Drilling1~5Shank with Flat Chamfered Cylinder-5513 020-575680 046-04(9IP)880-05…P/C0.4ISO 9766 Compliant

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>

Configure

Clear All

223 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Hole diameter (drill diameter) D(mm)

    • 12.5
    • 12.7
    • 13
    • 13.5
    • 14
    • 14.5
    • 15
    • 15.5
    • 16
    • 16.5
    • 17
    • 17.5
    • 18
    • 18.5
    • 19
    • 19.5
    • 20
    • 20.5
    • 20.9
    • 21
    • 21.5
    • 22
    • 22.5
    • 23
    • 23.5
    • 23.9
    • 24
    • 24.5
    • 25
    • 25.5
    • 26
    • 26.4
    • 26.5
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.5
    • 30
    • 30.5
    • 31
    • 31.5
    • 32
    • 32.5
    • 33
    • 33.5
    • 34
    • 34.5
    • 35
    • 35.5
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63

    Clear

  • Groove Length L(mm)

    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 48
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 103
    • 104
    • 105
    • 106
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 116
    • 118
    • 119
    • 120
    • 121
    • 122
    • 124
    • 126
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 133
    • 136
    • 138
    • 140
    • 143
    • 144
    • 146
    • 148
    • 149
    • 152
    • 154
    • 155
    • 156
    • 158
    • 159
    • 160
    • 161
    • 164
    • 167
    • 168
    • 169
    • 171
    • 172
    • 174
    • 175
    • 176
    • 177
    • 180
    • 183
    • 185
    • 186
    • 189
    • 190
    • 193
    • 194
    • 196
    • 197
    • 200
    • 201
    • 205
    • 209
    • 210
    • 213
    • 215
    • 220

    Clear

  • Overall Length L(mm)

    • 91
    • 92
    • 93
    • 95
    • 96
    • 97
    • 99
    • 101
    • 102
    • 103
    • 105
    • 108
    • 110
    • 111
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 119
    • 120
    • 122
    • 125
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 135
    • 136
    • 137
    • 138
    • 139
    • 140
    • 142
    • 143
    • 144
    • 145
    • 146
    • 147
    • 148
    • 149
    • 151
    • 153
    • 155
    • 156
    • 157
    • 160
    • 161
    • 162
    • 163
    • 164
    • 165
    • 168
    • 169
    • 170
    • 171
    • 172
    • 174
    • 175
    • 177
    • 178
    • 180
    • 182
    • 183
    • 187
    • 188
    • 189
    • 191
    • 192
    • 194
    • 196
    • 197
    • 198
    • 199
    • 200
    • 201
    • 202
    • 204
    • 205
    • 207
    • 209
    • 210
    • 212
    • 214
    • 216
    • 219
    • 221
    • 222
    • 223
    • 224
    • 225
    • 226
    • 227
    • 229
    • 230
    • 231
    • 232
    • 234
    • 235
    • 237
    • 240
    • 241
    • 242
    • 243
    • 245
    • 246
    • 249
    • 253
    • 254
    • 256
    • 258
    • 260
    • 263
    • 264
    • 267
    • 268
    • 270
    • 271
    • 274
    • 276
    • 279
    • 282
    • 283
    • 286
    • 287
    • 290
    • 291
    • 292
    • 293
    • 297
    • 298
    • 302
    • 304
    • 305
    • 306
    • 309
    • 310
    • 311
    • 315
    • 320
    • 325
    • 329
    • 331

    Clear

  • Shank Type

    • End Mill Shank
    • straight shank

    Clear

  • With/without Oil Hole

    • NA

    Clear

  • Maximum Machining Depth(mm)

    • 25
    • 26
    • 27
    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 50
    • 51
    • 52
    • 53
    • 54
    • 56
    • 57
    • 58
    • 59
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 68
    • 69
    • 70
    • 71
    • 72
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 104
    • 105
    • 106
    • 107
    • 108
    • 110
    • 111
    • 112
    • 114
    • 116
    • 117
    • 118
    • 120
    • 122
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 132
    • 135
    • 136
    • 138
    • 140
    • 141
    • 144
    • 146
    • 147
    • 148
    • 150
    • 152
    • 153
    • 155
    • 156
    • 159
    • 160
    • 162
    • 164
    • 165
    • 168
    • 170
    • 171
    • 172
    • 174
    • 175
    • 176
    • 177
    • 180
    • 183
    • 184
    • 185
    • 186
    • 188
    • 189
    • 190
    • 192
    • 195
    • 196
    • 200
    • 204
    • 205
    • 208
    • 210
    • 215

    Clear

  • Program Length(mm)

    • 41
    • 42
    • 43
    • 44
    • 46
    • 47
    • 49
    • 51
    • 52
    • 53
    • 55
    • 56
    • 57
    • 58
    • 60
    • 61
    • 62
    • 64
    • 66
    • 68
    • 69
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 81
    • 82
    • 84
    • 86
    • 87
    • 89
    • 90
    • 91
    • 92
    • 93
    • 95
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 103
    • 104
    • 105
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 117
    • 118
    • 119
    • 121
    • 122
    • 124
    • 126
    • 127
    • 128
    • 130
    • 131
    • 132
    • 134
    • 135
    • 137
    • 138
    • 139
    • 140
    • 141
    • 142
    • 143
    • 144
    • 146
    • 147
    • 149
    • 151
    • 152
    • 153
    • 154
    • 156
    • 157
    • 159
    • 160
    • 161
    • 162
    • 164
    • 165
    • 167
    • 170
    • 171
    • 172
    • 173
    • 175
    • 176
    • 177
    • 179
    • 183
    • 184
    • 186
    • 188
    • 190
    • 193
    • 194
    • 197
    • 198
    • 200
    • 201
    • 202
    • 204
    • 206
    • 207
    • 209
    • 211
    • 212
    • 213
    • 216
    • 217
    • 220
    • 222
    • 223
    • 226
    • 227
    • 228
    • 231
    • 232
    • 234
    • 235
    • 239
    • 240
    • 245
    • 249
    • 251

    Clear

  • Shank type(mm)

    • 20
    • 25
    • 32
    • 40
    • 50

    Clear

  • Screw pilot hole size

    • M16
    • M18
    • M20
    • M22
    • M24
    • M27
    • M30
    • M33

    Clear

  • Radial Direction Adjustment Amount (max)

    • +0.25
    • +0.3
    • +0.4
    • +0.45
    • +0.5
    • +0.6
    • +0.7
    • +0.8
    • +0.9
    • +1.0
    • +1.1
    • +1.2
    • +1.3
    • +1.4
    • +1.5
    • +1.6
    • +1.7
    • +1.9
    • +2.0

    Clear

  • Maximum Diameter(mm)

    • 13
    • 13.2
    • 13.5
    • 14
    • 15
    • 15.4
    • 15.8
    • 16.1
    • 16.6
    • 17.7
    • 18.2
    • 18.5
    • 18.8
    • 19.3
    • 19.6
    • 20.1
    • 21.8
    • 22.2
    • 22.4
    • 22.6
    • 22.9
    • 23.2
    • 23.3
    • 23.5
    • 24
    • 24.3
    • 24.5
    • 26.2
    • 26.5
    • 27
    • 27.3
    • 27.8
    • 28
    • 28.1
    • 28.4
    • 28.7
    • 29.2
    • 29.5
    • 30
    • 30.2
    • 30.3
    • 32.2
    • 32.6
    • 33
    • 33.4
    • 33.7
    • 34.1
    • 34.5
    • 34.9
    • 35.3
    • 35.6
    • 36
    • 36.4
    • 38.8
    • 39.5
    • 40.3
    • 41
    • 41.8
    • 42.5
    • 43.3
    • 44
    • 47
    • 47.8
    • 48.6
    • 49.2
    • 50
    • 50.8
    • 51.6
    • 52.2
    • 53
    • 57
    • 57.8
    • 58.4
    • 59.2
    • 60
    • 60.8
    • 61.4
    • 62.2
    • 63
    • 63.6
    • 64.4

    Clear

  • Tip angle(°)

    • 79
    • 88

    Clear

  • Machining Tolerance Reference(mm)

    • +0.25/0
    • +0.28/0
    • +0.30/0
    • +0.40/0
    • +0.43/0

    Clear

  • Drill Diameter Tolerance

    • +0.20/0
    • +0.24/+0.04
    • +0.25/0
    • +0.28/0
    • +0.29/+0.04

    Clear

  • Application

    • General Drilling

    Clear

  • Roughness of Processed Surface Ra(μm)

    • 1~5

    Clear

  • Type

    • Shank with Flat Chamfered Cylinder

    Clear

  • Trusco Code

    • 570-8338

    Clear

  • type

    • 131
    • 132
    • 151
    • 15□
    • 254R/LKF
    • 266
    • 266RKF
    • 26□
    • 321
    • 345
    • 392
    • 393
    • 3□□
    • 3□□□
    • 490
    • 4□□
    • 570
    • 5□□
    • 8800□□□
    • 8□□
    • A-K/M
    • A-T
    • A1B
    • A1F
    • A2
    • A32T
    • A4
    • A5
    • A□□□
    • C3
    • C4
    • C5
    • C6
    • C8
    • DD
    • E□□
    • LA
    • LF
    • LG
    • LX
    • L□□□
    • MB
    • MS
    • NF
    • N□□□
    • R/LX123
    • R1□□
    • R260.8
    • R2□□
    • R3□□
    • R5□□

    Clear

  • work material

    • general steel
    • high hardness steel
    • Stainless Steel
    • Cast Iron
    • Aluminum
    • Titanium

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 10 Day(s) or Less
    • 11 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.