(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
T-MAX P For turning (DNMG150408-QM-5015)
Unique shape exhibits high performance
Part Number
Configured Part Number is shown.
DNMG150408-QM-5015
| Part Number |
|---|
| DNMG150408-QM-5015 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | work material | Breaker Use | Nose R | Selfishly | s (Chip Thickness) (mm) | Tip Size | Diameter of Inscribed Circle iC | Material type | Tip Type | Chip Breaker Manufacturer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 88.90 | 10 Piece(s) | 10 Day(s) | Steel | Medium grinding | 0.8 | No-hand | 4.76 | 15 | 0.5 | 5015 | G | QM |
Loading...
Basic Information
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 2 |
|---|---|---|---|---|---|
| Rake angle | Negative | S Tolerance(mm) | ±0.13 | Tip relief angle(°) | 0 |
Please check the type/dimensions/specifications of the part DNMG150408-QM-5015 in the T-MAX P For turning series.
Specification/Dimensions
-
type
- DNMA
- DNMG
- DNMX
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Heat-resistant alloy, titanium alloy
-
Breaker Use
- Finish
- Medium grinding
-
Nose R
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
s (Chip Thickness)(mm)
-
Tip Size
-
Diameter of Inscribed Circle iC
-
Material type
-
Tip Type
- A
- G
- X
-
Chip Breaker Manufacturer
Days to Ship
-
- All
- 5 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| DNMA150612-KR-3205 |
| DNMG110404-KF3215 |
| DNMG110404-MF-1105 |
| DNMG150408-QM-S05F |
| DNMG150412-KM-3205 |
| DNMG150412-KR-3205 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | work material | Breaker Use | Nose R | Selfishly | s (Chip Thickness) (mm) | Tip Size | Diameter of Inscribed Circle iC | Material type | Tip Type | Chip Breaker Manufacturer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 109.68 | 10 Piece(s) | 10 Day(s) | Cast Iron | - | 1.2 | No-hand | 6.35 | 15 | 0.5 | 3205 | A | KR | ||
MYR 103.45 | 10 Piece(s) | 10 Day(s) | Cast Iron | Finish | 0.4 | No-hand | 4.76 | 11 | 0.375 | 3215 | G | KF | ||
MYR 93.10 | 10 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | ||
MYR 102.38 | 10 Piece(s) | 10 Day(s) | Heat-resistant alloy, titanium alloy | Medium grinding | 0.8 | No-hand | 4.76 | 15 | 0.5 | S05F | G | QM | ||
MYR 103.40 | 10 Piece(s) | 10 Day(s) | Cast Iron | Medium grinding | 1.2 | No-hand | 4.76 | 15 | 0.5 | 3205 | G | KM | ||
MYR 106.66 | 10 Piece(s) | 10 Day(s) | Cast Iron | - | 1.2 | No-hand | 4.76 | 15 | 0.5 | 3205 | G | KR |
Additional Products in this Category
- Sumi Diamond Chip R (Round) RPGW-M
- Insert (For SEC-Small Diameter Cut-Off Tool Bit SCT Type), Non-Handed Insert For Right-Handed Holder
- 80° Diamond-Shape With Hole, Positive 7°, CCMT-MU, For Light To Medium Cutting
- CoroCut MB Insert For Grooving
- Kyocera Turning Insert CA530 CVD Coating
- T-Max P Insert for turning, Rhombic 55°, Lathe Negative Tip, DNMG150612-QM-1105
- Standard Insert, 55° Diamond-Shape, Positive, TFD
- Replacement Blade Insert W (Hexagonal) WNMG-N-UZ
Customers Who Viewed This Item Also Viewed
-
Ceramic Negative Tip for T-Max P Turning ToolSANDVIK
Standard Price : MYR 82.90-
Days to Ship : 10 Day(s)
-
Negative Tip for T-Max P Turning ToolSANDVIK
Standard Price : MYR 46.28-
Days to Ship : 5 Day(s) or more
-
CORO-TURN 107 Positive Tip for MachiningSANDVIK
Standard Price : MYR 50.99-
Days to Ship : 8 Day(s) or more
-
CORO-TURN 111 Positive Tip for MachiningSANDVIK
Standard Price : MYR 49.83-
Days to Ship : 8 Day(s) or more
-
-
-
-
-
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○CJ "for Finishing to Intermediate Cutting / Pull-up"KYOCERA
Standard Price : MYR 48.37-
Days to Ship : 6 Day(s) or more
-
-
-
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
Standard Price : MYR 45.76-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy