(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Q-Cut T-MAX U Lock (L151.2-50005-4E-1125)
Sharp cutting edge and high performance
Part Number
Configured Part Number is shown.
L151.2-50005-4E-1125
| Part Number |
|---|
| L151.2-50005-4E-1125 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | work material | Nose R | Selfishly | Groove Width (For Grooving / Plunging) | Material type | Chip Breaker Manufacturer | Specifications | Groove Width Tolerance | Nose R tolerance | Other Nose R (mm) | Dimension ψ r (°) | Sheet size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 105.40 | 10 Piece(s) | 10 Day(s) | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | [Other] Other | Left-hand | 5.00mm | GC1125 | E | High Feed | +0.25/0 | ±0.10 | - | 5 | 50 |
Loading...
Basic Information
| Shape | Other | Application | Grooving / Parting | Available corners | 1 |
|---|---|---|---|---|---|
| Tip relief angle(°) | 7 |
Please check the type/dimensions/specifications of the part L151.2-50005-4E-1125 in the Q-Cut T-MAX U Lock series.
Specification/Dimensions
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
-
Other Nose R(mm)
-
type
- 151.2-4E
- 151.2-5E
- 151.2-5F
- 151.2-9E
-
Nose R
- 0.2
- Other
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Groove Width (For Grooving / Plunging)
-
Material type
-
Chip Breaker Manufacturer
-
Specifications
- Cutting, middle feed
- High Feed
- Intermediate feeding
- Low Feed
-
Groove Width Tolerance
- ±0.10
- +0.25/0
-
Nose R tolerance
- +0.04/0
- ±0.05
- ±0.10
-
Dimension ψ r(°)
- 0
- 1.5
- 5
- 8
- 12
- 15
-
Sheet size
Days to Ship
-
- All
- 5 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| L151.2-25015-5F-235 |
| L151.2-30008-5F-2135 |
| L151.2-30008-5F-235 |
| N151.2-250-5E-1005 |
| R151.2-40002-9E-1125 |
| R151.2-40005-5E4225 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | work material | Nose R | Selfishly | Groove Width (For Grooving / Plunging) | Material type | Chip Breaker Manufacturer | Specifications | Groove Width Tolerance | Nose R tolerance | Other Nose R (mm) | Dimension ψ r (°) | Sheet size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 96.91 | 10 Piece(s) | 10 Day(s) | Steel / Stainless Steel | [Other] Other | Left-hand | 2.50mm | GC235 | F | Low Feed | +0.25/0 | ±0.05 | - | 15 | 25 | ||
MYR 99.03 | 10 Piece(s) | 10 Day(s) | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | [Other] Other | Left-hand | 3.00mm | GC2135 | F | Low Feed | +0.25/0 | ±0.05 | - | 8 | 30 | ||
MYR 99.03 | 10 Piece(s) | 10 Day(s) | Steel / Stainless Steel | [Other] Other | Left-hand | 3.00mm | GC235 | F | Low Feed | +0.25/0 | ±0.05 | - | 8 | 30 | ||
MYR 90.41 | 10 Piece(s) | 10 Day(s) | Heat-resistant alloy, titanium alloy | 0.2 | No-hand | 2.50mm | GC1105 | E | Intermediate feeding | +0.25/0 | ±0.10 | - | 0 | 25 | ||
MYR 105.40 | 10 Piece(s) | 10 Day(s) | Steel / Stainless Steel / Cast Iron | [Other] Other | Right-hand | 4.00mm | GC1125 | E | Low Feed | ±0.10 | +0.04/0 | - | 1.5 | 40 | ||
MYR 106.83 | 10 Piece(s) | 5 Day(s) | Steel / Cast Iron | 0.2 | Right-hand | 4.00mm | 4225 | - | Cutting, middle feed | +0.25/0 | ±0.10 | 0.20 | 5 | 50 |
Additional Products in this Category
- W Type Hexagon 80° / Negative with Hole / WNMG080408-MTM20 "Intermediate Cutting"
- 55° Diamond-Shape With Hole, Positive 7°, DCMT-MU, For Light To Medium Cutting
- Blade Tip Replacement Tip S (Square) SNGG-R-UM
- Square-Shape With Hole, Negative, SNMG-MX, For Medium To Rough Cutting
- CoroThread 266 V-Shaped 55° Without Finishing Blade
- CoroTurn TR Insert For Turning (Diamond Shaped 55°)
- Sandvik T-Max P Lathe Negative Tip 5015
- Hexagon-Shape With Hole, Positive 11°, WPMT-LB, For Light Cutting
Customers Who Viewed This Item Also Viewed
-
T-Max Q-Cut Plunging/Grooving Shank BitSANDVIK
Standard Price : MYR 1,009.20-
Days to Ship : 5 Day(s) or more
-
-
Scribing Needle (With carbide tip)TRUSCO NAKAYAMA
Standard Price : MYR 77.13
Days to Ship : 9 Day(s)
-
-
Cross-Thread 254 Circlip Grooving TipsSANDVIK
Standard Price : MYR 190.73-
Days to Ship : 10 Day(s)
-
CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2SANDVIK
Standard Price : MYR 987.69-
Days to Ship : 10 Day(s)
-
Vaculeaner VCM-DF With DusterMEIJIKIKAI
Standard Price : MYR 836.44-
Days to Ship : 4 Day(s) or more
-
Negative Tip for T-Max P Turning ToolSANDVIK
Standard Price : MYR 46.28-
Days to Ship : 5 Day(s) or more
-
-
-
-
Spiral Taper Pipe Thread Tap (Short Thread)_SFT-S-TPTOSG
Standard Price : MYR 154.91-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy