(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Punching Blade KTKB-S Type (KTKB26-3S)
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Part Number
Configured Part Number is shown.
KTKB26-3S
| Part Number |
|---|
| KTKB26-3S |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Preferred Hand | φDmax (mm) | A (mm) | B (mm) | H (mm) | h (mm) | W (mm) | L (mm) | Applicable Blocks | Applicable Tip |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 670.60 | 1 Piece(s) | 10 Day(s) | No Preferred Hand | 75 | 2.6 | - | 26 | 21.4 | 3.1 | 110 | KTKTB 16-26/20-26 | TKN3,TKN3-P,TKR/L3,TKR/L3-P |
Loading...
Please check the type/dimensions/specifications of the part KTKB26-3S in the Punching Blade KTKB-S Type series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| KTKB26-2S |
| KTKB26-4S |
| KTKB26-5S |
| KTKB32-2S |
| KTKB32-3S |
| KTKB32-4S |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Preferred Hand | φDmax (mm) | A (mm) | B (mm) | H (mm) | h (mm) | W (mm) | L (mm) | Applicable Blocks | Applicable Tip |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 670.60 | 1 Piece(s) | 10 Day(s) | No Preferred Hand | 50 | 1.8 | - | 26 | 21.4 | 2.2/2.4 | 110 | KTKTB 16-26/20-26 | TKN2,TKN2.4,TKN2-P,TKR/L2,TKR/L2.4,TKR/L2-P | ||
MYR 670.60 | 1 Piece(s) | 10 Day(s) | No Preferred Hand | 80 | 3.4 | - | 26 | 21.4 | 4.1 | 110 | KTKTB 16-26/20-26 | TKN4,TKR/L4 | ||
MYR 670.60 | 1 Piece(s) | 10 Day(s) | No Preferred Hand | 80 | 4.2 | - | 26 | 21.4 | 4.8/5.1 | 110 | KTKTB 16-26/20-26 | TKN4.8,TKN5,TKR/L5 | ||
MYR 771.38 | 1 Piece(s) | 10 Day(s) | No Preferred Hand | 50 | 1.8 | 2.6 | 32 | 25 | 2.2/2.4 | 150 | KTKTB 20-32/25-32/32-32KTKTBF 25-32/32-32 | TKN2,TKN2.4,TKN2-P,TKR/L2,TKR/L2.4,TKR/L2-P | ||
MYR 754.21 | 1 Piece(s) | 10 Day(s) | No Preferred Hand | 100 | 2.6 | - | 32 | 25 | 3.1 | 150 | KTKTB 20-32/25-32/32-32KTKTBF 25-32/32-32 | TKN3,TKN3-P,TKR/L3,TKR/L3-P | ||
MYR 771.38 | 1 Piece(s) | 10 Day(s) | No Preferred Hand | 100 | 3.4 | - | 32 | 25 | 4.1 | 150 | KTKTB 20-32/25-32/32-32KTKTBF 25-32/32-32 | TKN4,TKR/L4 |
Additional Products in this Category
- SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type
- SEC-Small Diameter Perforating Bit, SCT Type
- Multi-Functional / Grooving Holder KGM Type
- Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)
- Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)
- CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2
- Holder For Cut-Off CTPL-SUB
- Holder For Cut-Off, CTPW
Customers Who Viewed This Item Also Viewed
-
-
Tool Block for Holding Blade, KTKTB Type (Split Type)KYOCERA
Standard Price : MYR 1,282.51-
Days to Ship : 6 Day(s) or more
-
-
Lathe Turning/Cutting Holder KGD Model (Combination)KYOCERA
Standard Price : MYR 640.96-
Days to Ship : 6 Day(s) or more
-
-
MGI Type Grooving End Mill Compatible TipKYOCERA
Standard Price : MYR 66.68-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting"KYOCERA
Standard Price : MYR 40.97-
Days to Ship : 5 Day(s) or more
-
SEC-Small Diameter Perforating Bit, SCT TypeSUMITOMO_ELEC_
Standard Price : MYR 534.78-
Days to Ship : 7 Day(s) or more
-
CoroCut 1/2 Plunging/Grooving Shank BitSANDVIK
Standard Price : MYR 1,009.20-
Days to Ship : 10 Day(s)
-
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_recommend_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB TypeKYOCERA
Standard Price : MYR 614.23-
Days to Ship : 6 Day(s) or more
-
C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)KYOCERA
Standard Price : MYR 1,853.07-
Days to Ship : 6 Day(s) or more
-
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy