(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
S...SCLC Type (External Diameter/End-Face Machining) (S19G-SCLCL06)
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Part Number
Configured Part Number is shown.
S19G-SCLCL06
Basic Information
| Applicable Tip Shape | C (80° Diamond) | Use | Major Diameter / End Surface | Clamp Shape | Screw On |
|---|---|---|---|---|---|
| Preferred Hand | Left Handed | Applicable Chip Clearance Angle | Positive | Reference Corner R (rε) | 0.4 |
Please check the type/dimensions/specifications of the part S19G-SCLCL06 in the S...SCLC Type (External Diameter/End-Face Machining) series.
Specification/Dimensions
-
type
- S12F-SCLCL06
- S14H-SCLCL06
- S15F-SCLCL06
- S16F-SCLCL06
- S19G-SCLCL06
- S19G-SCLCL09
- S19K-SCLCL06
- S19K-SCLCL09
- S20G-SCLCL06
- S20G-SCLCL09
- S20K-SCLCL06
- S20K-SCLCL09
- S25.0H-SCLCL09
- S25K-SCLCL09
-
Shank Height(mm)
-
Link Width(mm)
-
φD(mm)
- 12
- 14
- 15.875
- 16
- 19.05
- 20
- 25
- 25.4
-
φd1(mm)
- 13.4
- 15.4
- 18.4
- 19.4
- 24.4
- 24.8
-
F1(mm)
-
H1=H2(mm)
- 11
- 13
- 15
- 17
- 18
- 23
-
L1(mm)
-
Wrench
-
Clamp Screw
- SB-4065TR
- SB-2570TR
- SB-2560TR
Days to Ship
-
- All
- 6 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| S14H-SCLCL06 |
| S15F-SCLCL06 |
| S16F-SCLCL06 |
| S19G-SCLCL09 |
| S19K-SCLCL06 |
| S19K-SCLCL09 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shank Height (mm) | Link Width (mm) | φD (mm) | φd1 (mm) | F1 (mm) | H1=H2 (mm) | L1 (mm) | Wrench | Clamp Screw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,105.96 | 1 Piece(s) | 10 Day(s) | 13 | 13 | 14 | 13.4 | 6 | 13 | 100 | FT-8 | SB-2560TR | ||
MYR 1,093.78 | 1 Piece(s) | 6 Day(s) or more | 15 | 15 | 15.875 | 15.4 | 6 | 15 | 85 | FT-8 | SB-2570TR | ||
MYR 1,105.96 | 1 Piece(s) | 10 Day(s) | 15 | 15 | 16 | 15.4 | 6 | 15 | 85 | FT-8 | SB-2570TR | ||
MYR 1,186.66 | 1 Piece(s) | 10 Day(s) | 17 | 17 | 19.05 | 18.4 | 10 | 17 | 90 | FT-15 | SB-4065TR | ||
MYR 1,186.66 | 1 Piece(s) | 10 Day(s) | 17 | 17 | 19.05 | 18.4 | 6 | 17 | 120 | FT-8 | SB-2570TR | ||
MYR 1,186.66 | 1 Piece(s) | 10 Day(s) | 17 | 17 | 19.05 | 18.4 | 10 | 17 | 120 | FT-15 | SB-4065TR |
Additional Products in this Category
- SEC-Mini Bit, STAC Type
- MVLN Type (External Diameter, Profiling)
- Shank Tool Bit T-Max P Lever Clamp PSBNR/L
- Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L
- Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR/L
- Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTJNR/L
- Holder For Front-Turning, DS-SDU-ACH
- Holder For Outer Diameter Machining, C31/CCLN
Customers Who Viewed This Item Also Viewed
-
SCLC-FF Type (without Offset) (External Diameter / End Face Machining)KYOCERA
Standard Price : MYR 372.10-
Days to Ship : 10 Day(s) or more
-
DCLN Type (Outer Diameter Machining / End Machining)KYOCERA
Standard Price : MYR 440.70-
Days to Ship : 10 Day(s)
-
Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"KYOCERA
Standard Price : MYR 57.43-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed"
KYOCERA
Standard Price : MYR 50.23-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"KYOCERA
Standard Price : MYR 44.95-
Days to Ship : 5 Day(s) or more
-
SCLC Type (External Diameter/End-Face Machining)KYOCERA
Standard Price : MYR 369.61-
Days to Ship : 6 Day(s) or more
-
Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Finishing"KYOCERA
Standard Price : MYR 50.23-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing"
KYOCERA
Standard Price : MYR 56.82-
Days to Ship : 5 Day(s) or more
-
S...SDUC Type (External Diameter, Profiling)KYOCERA
Standard Price : MYR 1,093.78-
Days to Ship : 6 Day(s) or more
-
ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)KYOCERA
Standard Price : MYR 428.01-
Days to Ship : 6 Day(s) or more
-
![Outer Diameter Threading Tool Holder [for TTX Chip] S...KTTX Type (Outer Diameter Sleeve Holder)](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/SKTTX.jpg?$product_recommend_b$)
Outer Diameter Threading Tool Holder [for TTX Chip] S...KTTX Type (Outer Diameter Sleeve Holder)KYOCERA
Standard Price : MYR 1,029.29-
Days to Ship : 6 Day(s) or more
![Outer Diameter Threading Tool Holder [for TTX Chip] S...KTTX Type (Outer Diameter Sleeve Holder)](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/SKTTX.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy