(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
80° Diamond-Shape With Hole, Negative, CNMG-SU, For Finish Cutting
[Features]
· Breaker with proven performance for small cutting and high feed rates.
Part Number
Configured Part Number is shown.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Use | Nose Radius | Corner Height Tolerance | Inscribed Circle Tolerance | Thickness Tolerance | Hole Availability | Hole Shape | Breaker Availability | Material Type | Dimension S (mm) | Dimension φd (mm) | Detail Nose Radius (mm) | Breaker Rake Angle (°) | Cutting Edge Length (mm) | Material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1000A | 4.76 | 12.7 | 0.2 | - | 12.9 | Cermet | ||
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 4.76 | 12.7 | 0.2 | - | 12.9 | Cermet | ||
MYR 34.69 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 4.76 | 12.7 | 0.2 | - | 12.9 | Coated cermet | ||
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1000A | 4.76 | 12.7 | 0.4 | - | 12.9 | Cermet | ||
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 4.76 | 12.7 | 0.4 | - | 12.9 | Cermet | ||
MYR 34.69 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 4.76 | 12.7 | 0.4 | - | 12.9 | Coated cermet | ||
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1000A | 4.76 | 12.7 | 0.8 | - | 12.9 | Cermet | ||
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 4.76 | 12.7 | 0.8 | - | 12.9 | Cermet | ||
MYR 34.69 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 4.76 | 12.7 | 0.8 | - | 12.9 | Coated cermet | ||
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 1.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1000A | 4.76 | 12.7 | 1.2 | - | 12.9 | Cermet | ||
MYR 31.73 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 1.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 4.76 | 12.7 | 1.2 | - | 12.9 | Cermet | ||
MYR 34.69 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Outer Diameter / Inner Diameter | 1.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 4.76 | 12.7 | 1.2 | - | 12.9 | Coated cermet |
Loading...
Basic Information
| Shape | C (80° Diamond) | Breaker Application | Finish | Rake Angle | Negative |
|---|---|---|---|---|---|
| Preferred Hand | No Preferred Hand | Clearance Angle(°) | 0 | Slot Code | G |
Specification/Dimensions
-
Use
- Outer Diameter / Inner Diameter
-
Nose Radius
-
Corner Height Tolerance
- ±0.08～±0.2
-
Inscribed Circle Tolerance
- ±0.05～±0.15
-
Thickness Tolerance
- ±0.13
-
Hole Availability
- Available
- Yes
-
Hole Shape
- Cylinder State
- Cylindrical
-
Breaker Availability
- Both Faces
- No
- Yes (both sides)
-
Material Type
-
Dimension S(mm)
-
Dimension φd(mm)
-
Detail Nose Radius(mm)
-
Breaker Rake Angle(°)
-
type
- CNMG-SU
- CNMG□□□□□□N-SU
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
Days to Ship
-
- All
- 5 Day(s) or Less
- 7 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Sumi Diamond Tip Other (For SEC-Ace Mill APG Type)
- Tip (SEC - Grooving Tool GND Type)
- Chip (Chip for Carbide Bits) 02-○
- 55° Diamond-Shape With Hole, 55°, Positive 7°, DCMT-SU, For Light To Medium Cutting
- CoroCut
- Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GC "for Rough Cutting" for Cast Iron
- Kyocera Insert for Turning CBN KBN525
- Kyocera Turning Insert PV720 PVD Cermet (TPGH/TPGR/TPMT)
Customers Who Viewed This Item Also Viewed
-
Replacement Blade Insert C (80° Diamond) CNMG-N-GUSUMITOMO_ELEC_
Standard Price : MYR 27.60-
Days to Ship : 5 Day(s) or more
-
Blade Tip Replacement Tip C (80°Diamond) CCMT-T-N-SUSUMITOMO_ELEC_
Standard Price : MYR 30.98-
Days to Ship : 7 Day(s) or more
-
Blade Tip Replacement Tip C (80°Diamond) CNMG-N-FASUMITOMO_ELEC_
Standard Price : MYR 31.73-
Days to Ship : 7 Day(s) or more
-
80° Diamond-Shape With Hole, Positive 11°, CPMT-SU, For Light CuttingSUMITOMO_ELEC_
Standard Price : MYR 24.98-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Negative, CNMG-MU, For Medium To Rough CuttingSUMITOMO_ELEC_
Standard Price : MYR 34.69-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Negative, CNMG-LU, For Finish CuttingSUMITOMO_ELEC_
Standard Price : MYR 24.65-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Negative, CNMG-UG, For Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 27.60-
Days to Ship : 5 Day(s) or more
-
Blade Tip Replacement Tip APMT-PDERSUMITOMO_ELEC_
Standard Price : MYR 49.88-
Days to Ship : 5 Day(s) or more
-
55° Diamond-Shape With Hole, Negative, DNMG-EG, For Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 40.18-
Days to Ship : 7 Day(s) or more
-
Replacement Blade Insert C (80° Diamond) CCGT-R-FXSUMITOMO_ELEC_
Standard Price : MYR 45.41-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Positive 7°, CCMT-LU, For Finish CuttingSUMITOMO_ELEC_
Standard Price : MYR 24.65-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Positive 7°, CCMT-MU, For Light To Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 38.71-
Days to Ship : 7 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy