(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Replacement Blade Insert C (80° Diamond) CNMG-N-GU (CNMG120416NGUAC820P)
A CNMG□□ diamond-shaped insert.
Part Number
Configured Part Number is shown.
CNMG120416NGUAC820P
| Part Number |
|---|
| CNMG120416NGUAC820P |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Nose Radius | Corner Height Tolerance | Inscribed Circle Tolerance | Hole Availability | Hole Shape | Breaker Availability | Material Type | Dimension S (mm) | Dimension φd (mm) | Detail Nose Radius (mm) | Cutting Edge Length (mm) | Material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 34.69 | 10 Piece(s) | 5 Day(s) or more | Steel / Cast Iron | 1.6 | ±0.08～±0.2 | ±0.05～±0.15 | Available | Cylinder State | Both Faces | AC820P | 4.76 | 12.7 | 1.6 | 12.9 | Carbide Coating |
Loading...
Basic Information
| Shape | C (80° Diamond) | Use | Outer Diameter / Inner Diameter | Breaker Application | Medium Cutting |
|---|---|---|---|---|---|
| Rake Angle | Negative | Preferred Hand | No Preferred Hand | Clearance Angle(°) | 0 |
| Thickness Tolerance | ±0.13 | Slot Code | G |
Please check the type/dimensions/specifications of the part CNMG120416NGUAC820P in the Replacement Blade Insert C (80° Diamond) CNMG-N-GU series.
Specification/Dimensions
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
-
type
- CNMG□□□□□□N-GU
-
Nose Radius
-
Corner Height Tolerance
- ±0.08 to ±0.2
- ±0.08～±0.2
-
Inscribed Circle Tolerance
- ±0.05 to ±0.15
- ±0.05～±0.15
-
Hole Availability
- Available
- Yes
-
Hole Shape
- Cylinder State
- Cylindrical
-
Breaker Availability
- Both Faces
- Both sides
- No
-
Material Type
-
Dimension S(mm)
-
Dimension φd(mm)
-
Detail Nose Radius(mm)
Days to Ship
-
- All
- 5 Day(s) or Less
- 7 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| CNMG090308NGUAC830P |
| CNMG120404NGUAC520U |
| CNMG120404NGUAC530U |
| CNMG120416NGUAC830P |
| CNMG160608NGUAC820P |
| CNMG160608NGUAC830P |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Nose Radius | Corner Height Tolerance | Inscribed Circle Tolerance | Hole Availability | Hole Shape | Breaker Availability | Material Type | Dimension S (mm) | Dimension φd (mm) | Detail Nose Radius (mm) | Cutting Edge Length (mm) | Material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 27.60 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | Available | Cylinder State | Both Faces | AC830P | 3.18 | 9.525 | 0.8 | 9.7 | Carbide Coating | ||
MYR 34.69 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | Available | Cylinder State | Both Faces | AC520U | 4.76 | 12.7 | 0.4 | 12.9 | Carbide Coating | ||
MYR 34.69 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | Available | Cylinder State | Both Faces | AC530U | 4.76 | 12.7 | 0.4 | 12.9 | Carbide Coating | ||
MYR 34.69 | 10 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel | 1.6 | ±0.08～±0.2 | ±0.05～±0.15 | Available | Cylinder State | Both Faces | AC830P | 4.76 | 12.7 | 1.6 | 12.9 | Carbide Coating | ||
MYR 69.97 | 10 Piece(s) | 7 Day(s) or more | Steel / Cast Iron | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | Available | Cylinder State | Both Faces | AC820P | 6.35 | 15.875 | 0.8 | 16.1 | Carbide Coating | ||
MYR 69.97 | 10 Piece(s) | 7 Day(s) or more | Steel / Stainless Steel | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | Available | Cylinder State | Both Faces | AC830P | 6.35 | 15.875 | 0.8 | 16.1 | Carbide Coating |
Additional Products in this Category
- Sumi Boron Chip V (35° Rhombus) T-2NU-VNGA
- Insert (For Cut-Off)
- Blade Replacement Insert D (55° Rhombic) DCET-T-L-FX
- Blade Tip Replacement Tip W (Hexagonal) WDMT-ZDTR
- Negative Type 80°/100°, Diamond-Shaped Tip, for General Purpose Processing
- Cross-Thread 266 Thread Cutting CBN Tip
- T-Max P CBN Negative Insert For Turning (Diamond Shaped 55°)
- Small Bore Slotting Tip (for Models GIV, GIV-E, GIV-W), 2 Corner Specification, Full Radius Groove
Customers Who Viewed This Item Also Viewed
-
Blade Tip Replacement Tip C (80°Diamond) CNMG-N-GZSUMITOMO_ELEC_
Standard Price : MYR 34.69
Days to Ship : 7 Day(s) or more
-
Tip (Square Groove Grooving Tip TGA Type) TGARESUMITOMO_ELEC_
Standard Price : MYR 67.35-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Positive 11°, CPMT-SU, For Light CuttingSUMITOMO_ELEC_
Standard Price : MYR 24.98-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Negative, CNMG-SU, For Finish CuttingSUMITOMO_ELEC_
Standard Price : MYR 27.60-
Days to Ship : 5 Day(s) or more
-
-
80° Diamond-Shape With Hole, Negative, CNMG○○○-EX, For Light To Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 34.54-
Days to Ship : 5 Day(s) or more
-
80° Diamond-Shape With Hole, Negative, CNMG-MU, For Medium To Rough CuttingSUMITOMO_ELEC_
Standard Price : MYR 34.69-
Days to Ship : 5 Day(s) or more
-
Tip (Square Groove Grooving Tip TGA Type) TGAR
SUMITOMO_ELEC_
Standard Price : MYR 71.83-
Days to Ship : 5 Day(s) or more
-
PICCO-CUT Small-Diameter Solid Bar 002, 003, 004, 005, 006, 007, for Grooving/BoringISCAR
Standard Price : MYR 246.62-
Days to Ship : 5 Day(s) or more
-
Blade Tip Replacement Tip C (80°Diamond) CCMT-T-N-SUSUMITOMO_ELEC_
Standard Price : MYR 30.98-
Days to Ship : 7 Day(s) or more
-
Replacement Blade Insert C (80° Diamond) CCGT-R-FXSUMITOMO_ELEC_
Standard Price : MYR 45.41-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy