(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Industrial Brush "Corfill E Master" (15081)
This material has silicone carbide abrasive grains embedded into a nylon filament. As the absorption rate is low, it can be used in the same manner in both wet and dry polishing.
(i)Caution
- Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.
Japanese Only
| Part Number |
|---|
| 15081 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (mm) | Thickness (mm) | Hole Diameter | Bristle Length (mm) | Maximum Operating Rotational Speed (rpm) | Particle Size (#) | Trusco Code | Mass (g) | Supported Adapter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 596.21 | 1 Piece(s) | 8 Day(s) | 150 | 17 | 7/8 (Inch) | 32 | 8000 | 180 | 383-3330 | 320 | F |
Loading...
Basic Information
| Product Model | Wheel Brush | Features | This material has silicone carbide abrasive grains embedded into a nylon filament. | Use | Deburring, surface preparation, micro-deburring of hydraulic parts, etc. |
|---|---|---|---|---|---|
| Material : Abrasive | Nylon Filament (Silicone Carbide Abrasive Grain) |
Please check the type/dimensions/specifications of the part 15081 in the Industrial Brush "Corfill E Master" series.
Specification/Dimensions
-
type
- 15025
- 15026
- 15027
- 15028
- 15050
- 15051
- 15052
- 15053
- 15056
- 15058
- 15079
- 15080
- 15081
- 15082
-
Outer Diameter(mm)
-
Thickness(mm)
- 13
- 17
- 18
-
Hole Diameter
-
Bristle Length(mm)
-
Maximum Operating Rotational Speed(rpm)
-
Particle Size(#)
- 80
- 120
- 180
- 320
-
Trusco Code
Days to Ship
-
- All
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| 15026 |
| 15027 |
| 15028 |
| 15050 |
| 15051 |
| 15082 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (mm) | Thickness (mm) | Hole Diameter | Bristle Length (mm) | Maximum Operating Rotational Speed (rpm) | Particle Size (#) | Trusco Code | Mass (g) | Supported Adapter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 419.25 | 1 Piece(s) | 8 Day(s) | 100 | 13 | 5/8 (Inch) | 20 | 12000 | 120 | 383-3224 | 200 | F | ||
MYR 419.25 | 1 Piece(s) | 8 Day(s) | 100 | 13 | 5/8 (Inch) | 20 | 12000 | 180 | 383-3232 | 200 | F | ||
MYR 419.25 | 1 Piece(s) | 8 Day(s) | 100 | 13 | 5/8 (Inch) | 20 | 12000 | 320 | 383-3241 | 200 | F | ||
MYR 1,199.08 | 1 Piece(s) | 8 Day(s) | 200 | 18 | 2 (Inch) | 35 | 6000 | 80 | 383-3259 | 1000 | 4M | ||
MYR 1,199.08 | 1 Piece(s) | 8 Day(s) | 200 | 18 | 2 (Inch) | 35 | 6000 | 120 | 383-3267 | 1000 | 4M | ||
MYR 596.53 | 1 Piece(s) | 8 Day(s) | 150 | 17 | 7/8 (Inch) | 32 | 8000 | 320 | 383-3348 | 320 | F |
Additional Products in this Category
- Wheel Brush with Shaft (for Motorized Use/Shaft Diameter 6 mm/Round Shaft Type) (Brass)
- Mounted Wheel Brush, Brass-Plated Steel Wire (Shaft Length 3 mm)
- Umbrella-Shaped Brush, Maximum Rotational Speed (Rpm): 10000
- Miniature Grit Spiral Brush with Abrasive
- Bristle Cup Brush
- Knotted Shaft Mounted End Brush (Shaft Diameter 6 mm / High Tensile Strength Steel)
- Stainless Steel Bevel Brush
- Metal Brush, Wheel, Steel (Hard Steel Wire)
Customers Who Viewed This Item Also Viewed
-
-
Narutoya, Stainless Steel Wheel Brush, Double-Headed Grinders / Bench Grinders / Benchtop Electric Grinders, W-491NARUTOYA
Standard Price : MYR 194.75-
Days to Ship : 8 Day(s) or more
-
Steel Wire Gold Wheel Brush, W-6/-9E/-21NARUTOYA
Standard Price : MYR 118.86-
Days to Ship : 8 Day(s) or more
-
0.3 Steel Wire Pressed Wheel BrushSUNPOWER
Standard Price : MYR 29.68-
Days to Ship : 5 Day(s) or more
-
-
SUS304 Stainless Steel Wheel Brush 0.3SUNPOWER
Standard Price : MYR 110.45-
Days to Ship : 4 Day(s) or more
-
-
Shaft Mounted Wheel Shaped BrushSUNPOWER
Standard Price : MYR 37.62-
Days to Ship : 5 Day(s) or more
-
-
-
-
Wheel Brush (0.3 Stainless Steel Wire)TRUSCO NAKAYAMA
Standard Price : MYR 56.63-
Days to Ship : 8 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy