• Volume Discount

Slide Suspension Band Wrench
Part Number: PHW-1013L

For Tightening Screws for Various Piping Bands

[Features]
· The socket slides in 3 levels.
· The tip eyelets (12 mm and 17 mm) can be used for turning hanging brackets.
· The tip eyelet part has a unique shape.
· Rapid turning without falling out is possible even when released from the hand.
· The tip eyelet part is bent by 15° to make work easy from below.
· Both the body and the claw are forged for excellent strength.
· The 13 mm socket part on PHW-1013L can be connected to multi-sockets.
· The body has a φ4.0 hole for the safety cord.

Specifications of PHW-1013L

• Type

  Combination

• Ratchet mechanism

  Not Included

• Swivel (flex)

  Not Included

• Overall Length(mm)

  174

• Offset Angle(°)

  15

• Width across flat dimension(mm)

  10×13

• Single Product/Set Classification

  Single Item

• Socket Outer Diameter(mm)

  Small: 20/large: 20

• Double Box End Part Dimensions(mm)

  12

• Guaranteed Torque(N·m)

  Small: 78.5, large: 94.1

• Weight(g)

  240

• Material

  Cr-V

• Specifications

  12-Sided Surface

• Features

  The socket part has three stages of sliding. The tip box wrenches (12 mm and 17 mm) can be used for turning the hanging brackets. The tip box wrench part can be rotated quickly without falling even if the hands are released.The tip box wrench part is bent 15° and makes it easier to work from the bottom. The main body, and even the pawls, are forged and have outstanding strength. The 13 mm socket part can be connected to multi sockets. The main body has a φ4.0 safety cord hole.

• Backing Sheet Dimension(mm)

  235×125

Please check the type/dimensions/specifications of the part PHW-1013L in the Slide Suspension Band Wrench series.