(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Triangular Chip TOP Breaker
Triangular Chip Top Breaker
[Features]
This is a cutting tools that toughness is higher compared with other material tip, making it optimum for intermittent cutting and machining that does not increase the rotational speed of the workpiece.
[Specification]
Quantity per pack: 10piece
Thickness: 4.76mm
Compatible model:General purpose lathe, NC lathe
Shape: Triangle
Available corners:3
[Materials]
high speed steel
[Application]
outer diameter / inner diameter
Japanese Only
Part Number
Configured Part Number is shown.
Features
● Toughness is higher compared with other material tip, making it optimum for intermittent cutting and machining that does not increase the rotational speed of the workpiece.Specification
●Q'ty Per Pack（piece）:10●Shape:Triangle
●Breaker:TOP Breaker
●Thickness（mm）:4.76
● Compatible Model: General Purpose Lathe, NC Lathe
Materials
● High Speed Steel（SKH57）| Part Number |
|---|
| H-09T6004-BT1 |
| H-09T6004-BT2 |
| H-12T6004-BT2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nose R | D1 (mm) | D2 (mm) | R (mm) | Carbide Tip Model |
|---|---|---|---|---|---|---|---|---|---|
MYR 242.62 | 10 Piece(s) | 6 Day(s) or more | 0.2 | 9.525 | 3.81 | 0.2 | TN●●1604～ | ||
MYR 277.17 | 10 Piece(s) | 9 Day(s) | 0.4 | 9.525 | 3.81 | 0.4 | TN●●1604～ | ||
MYR 302.16 | 10 Piece(s) | 10 Day(s) | 0.8 | 12.7 | 5.16 | 0.8 | TN●●2204～ |
Loading...
Basic Information
| Shape | T (Triangular) | work material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Application | Outer Diameter / Inner Diameter |
|---|---|---|---|---|---|
| Available corners | 3 | Rake angle | Negative | Selfishly | No Preferred Hand |
| t(mm) | 4.76 | No. of Units Ordered(Pcs) | 10 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PH "for Rough Cutting"
- Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○CJ "for Finishing to Intermediate Cutting / Pull-up"
- 80° Hexagon Type Negative with Hole WNGG○○ TK "Medium to Rough Sharp Edge" Stainless Steel Heat-resistant Alloy
- Small-Nega for Automatic Grid DNGU [Finishing]
- 60° Triangle Positive without Hole TPGR○○-C "Medium Cutting"
- UNJ 60° With Finishing Blade
- Negative Insert T-Max P Triangular Shaped 60°
- Kyocera Turning Insert CA530 CVD Coating (CNMG/CPMH)
Customers Who Viewed This Item Also Viewed
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy