(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
MELSEC-F Series Analog Input/Output (Part Numbers)
12‑bit binary resolution analog input/output adapter.
[Features]
· Mixed input/output type with 2 analog input channels and 1 analog output channel.
· A 2‑channel voltage input (0 V to 10 V DC), or a current input (4 to 20 mA DC) can be used.
· A 1-channel voltage output (0 V to 10 V DC), or a current output (4 to 20 mA DC) can be used.
· Input voltage or input current can be specified for each channel.
[Applications]
· Convenient for conversion of analog input signal to digital values, and for conversion of digital values to analog output signal.
Part Number
Configured Part Number is shown.
FX3U-3A-ADP
Analog Input/Output Adapter FX3U-3A-ADP
Drawing (unit: mm)
Compatible Standards
| Compatible Standards | CE(EMC) UL/cUL KC |
|---|
Performance Specifications
| Analog Input | Analog Input Range | Voltage Input | 0 to 10 V DC (input resistance 198.7 kΩ) |
|---|---|---|---|
| Current Input | 4 to 20 mA DC (input resistance 250Ω) | ||
| Number of Input Channels | 2 channels | ||
| Absolute Maximum Input | Voltage Input | -0.5 V, +15 V | |
| Current Input | -2 mA, +30 mA | ||
| Input Characteristics | Input mode (voltage/current input) is configurable for each channel. | ||
| Digital Output | 12-bit binary | ||
| Resolution | Voltage Input | 2.5 mV (10 V×1/4,000) | |
| Current Input | 5μA (16 mA×1/3,200) | ||
| Overall Accuracy | Voltage Input | Ambient Temperature 25°C±5°C: For Full-scale 10 V±0.5% (±50 mV) Ambient Temperature 0°C to 55°C: For Full-scale 10 V±1.0% (±100 mV) | |
| Current Input | Ambient Temperature 25°C±5°C: For Full-scale 16 mA±0.5% (±80μA) Ambient Temperature 0°C to 55°C: For Full-scale 16 mA±1.0% (±160μA) | ||
| A/D Conversion Time | When Connected to FX3U/FX3UC Sequencer | 80μs× Number of input channels used + 40μs× Number of output channels used (Data is updated every operating period.) | |
| When Connected to FX3S/FX3G/FX3GC Sequencer | 90μs× Number of input channels used + 50μs× Number of output channels used (Data is updated every operating period.) | ||
| Insulation Method | · Insulation between the analog input/output part and the sequencer: by opto-isolator · Insulation between the drive power supply and the analog input/output part: by DC/DC converter · Non-insulated between channels | ||
| Analog Output | Analog Output Range | Voltage Output | 0 to 10 V DC (external load resistance 5 k to 1 MΩ) |
| Current Output | 4 to 20 mA DC (external load resistance 500Ωor less) | ||
| Number of Output Channels | 1 channel | ||
| Output Characteristics | Output mode (voltage/current output) is configurable. | ||
| Digital Input | 12-bit binary | ||
| Resolution | Voltage Output | 2.5 mV (10 V×1/4,000) | |
| Current Output | 4μA (16 mA×1/4,000) | ||
| Overall Accuracy | Voltage Output | Ambient temperature 25°C±5°C: for full-scale 10 V±0.5% (±50 mV) Ambient temperature 0°C to 55°C: for full-scale 10 V±1.0% (±100 mV) If the external load resistance (Rs) is smaller than 5 kΩ, the value will be increased by those calculated below. (100 mV increase for every 1%.) 47×100/(Rs+47)-0.9(%) | |
| Current Output | Ambient Temperature 25°C±5°C: For Full-scale 16 mA±0.5% (±80μA) Ambient Temperature 0°C to 55°C: For Full-scale 16 mA±1.0% (±160μA) | ||
| D/A Conversion Time | When Connected to FX3U/FX3UC Sequencer | 80μs × Number of input channels used + 40μs × Number of output channels used (Data is updated every operating period.) | |
| When Connected to FX3S/FX3G/FX3GC Sequencer | 90μs× Number of input channels used + 50μs× Number of output channels used (Data is updated every operating period.) | ||
| Insulation Method | · Insulation between the analog input/output part and the sequencer: by opto-isolator · Insulation between the drive power supply and the analog input/output part: by DC/DC converter · Non-insulated between channels | ||
| Number of Occupied Inputs/Outputs | 0 (regardless of the maximum number of input/output points of the sequencer) | ||
| Applicable Sequencer | FX3S, FX3G (Ver. 1.20 or later), FX3U (Ver. 2.61 or later), FX3GC, FX3UC (Ver. 2.61 or later) Connection to FX3S requires FX3S-CNV-ADP. Connection to FX3G requires FX3G-CNV-ADP. Connection to FX3U and to FX3UC-32MT-LT (-2) requires a function expansion board. | ||
| Weight | Approx. 0.1 kg | ||
Power Supply Specification
| Power Supply | Conversion Circuit Drive Power Supply | 24 V DC +20%, -15%, 90 mA Power shall be supplied by connecting a 24 V DC power supply to the terminal block. |
|---|---|---|
| Interface Drive Power Supply | 5 V DC, 20 mA Power is supplied internally from the 5 V DC power supply of the base unit. |
General Specifications
| Ambient Temperature | 0 to 55°C: While in operation, -25 to 75°C: While in storage | ||
|---|---|---|---|
| Relative Humidity | 5 to 95% RH (no condensation): While in operation | ||
| Vibration Resistance | When Mounted to DIN Rail | Frequency: 10 to 57 Hz | Single amplitude: 0.035 mm, 10 times in each direction of X, Y and Z (total of 80 minutes each) |
| Frequency: 57 to 150 Hz | Acceleration: 4.9 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| When Mounted Directly | Frequency: 10 to 57 Hz | Single Amplitude: 0.075 mm, 10 times in each direction of X, Y and Z (total of 80 minutes each) | |
| Frequency: 57 to 150 Hz | Acceleration: 9.8 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| Impact Resistant | 147 m/s2, for an activation period of 11 ms, 3 times in each direction of X, Y and Z with a half-sine pulse | ||
| Noise Resistance | Noise voltage 1,000 Vp-p, noise width 1μs, rise time 1 ns, according to a noise simulator with frequency 30 to 100 Hz | ||
| Voltage-resistance | Between all terminals as a whole and the earth terminal: 500 V AC for 1 minute | ||
| Insulation Resistance | Between all terminals as a whole and the earth terminal: 5 MΩ or more on an 500 V DC ohmmeter | ||
| Grounding | Class D grounding (ground resistance: 100Ωor less) "Shared grounding with a high-power system is not allowed" Use dedicated or shared ground. | ||
| Operating Atmosphere | There shall be no corrosion gas or flammable gas and not much conductive dust | ||
| Altitude of Use | 2,000 m or lower Cannot be used in environments pressurized above atmospheric pressure. Doing so may cause failure. | ||
| Part Number |
|---|
| FX3U-3A-ADP |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS |
|---|---|---|---|---|---|
MYR 1,188.33 | 1 Piece(s) | 97 Day(s) | 6 |
Loading...
Basic Information
| Representative Standard | CE | Type of Unit | Analog Input/Output Adapter | Applicable sequencer | FX3S / FX3G / FX3U / FX3GC / FX3UC |
|---|---|---|---|---|---|
| Number of input channels(ch) | 2 | Number of output channels(ch) | 1 | Voltage input range(V) | DC0 to 10V |
| Current input range(mA) | DC 4–20 mA | Voltage output range | DC0 to 10V | Current output range | DC 4–20 mA |
Please check the type/dimensions/specifications of the part FX3U-3A-ADP in the MELSEC-F Series Analog Input/Output series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- MELSEC CC-Link compact type remote I/O unit (input/output unit)
- CC-Link/LT Input/Output Unit (Output)
- MELSEC-Q Output Unit
- CS1D series I/O interface unit
- MELSEC-F Series Input/Output Expansion Unit
- CC-Link IE Field Network block-type remote unit NZ2GF Series
- Input Module, CPX Series
- Input Module, CTSL Series
Customers Who Viewed This Item Also Viewed
-
-
MELSEC-F Series Data Link / Communication Expansion Board (RS-422/USB)MITSUBISHI
Standard Price : MYR 173.33-
Days to Ship : 65 Day(s) or more
-
MELSEC-F Series Data Link and Communication (RS-232C)MITSUBISHI
Standard Price : MYR 173.33-
Days to Ship : 65 Day(s) or more
-
MELSEC-F Series Adapter for Connecting Special AdaptersMITSUBISHI
Standard Price : MYR 173.33-
Days to Ship : 65 Day(s) or more
-
MELSEC-F Series Analog OutputMITSUBISHI
Standard Price : MYR 401.67-
Days to Ship : 4 Day(s) or more
-
MELSEC-F Series Positioning Contro (SSCNET)MITSUBISHI
Standard Price : MYR 3,278.33
Days to Ship : 82 Day(s)
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy