Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Regulator Push-Lock Type (RVCMP6-02)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

[Features]
· Push-lock type knob allows for easy fixing and pressure adjustment operation with one hand
· Ideal for preventing loosening of the lock nut due to machine vibration, etc.
· New structure increases flow rate by approximately 1.3 times compared to existing products. Further reduction in pressure fluctuation range
· Equipped with a relief mechanism convenient for equipment adjustment
· Equipped with a backflow mechanism. Can be installed between the solenoid valve and actuator and used as a check-type regulator.
· A type with a pressure gauge is also available.

(i)Caution

The product images are representative only. Specifications may vary by part number, including shape and color.

Part Number

Configured Part Number is shown.

RVCMP6-02

Product Specifications
Part Numbers
Catalog

Drawing

RVCP elbow

Unit: mm

Type	Tube outer diameter ⌀D	R	A	B		L1		L2	L3	⌀p1	⌀p2
Type	Tube outer diameter ⌀D	R	A	Max.	Min.	Max.	Min.	L2	L3	⌀p1	⌀p2
RVCP4-M5	4	M5 x 0.8	3	70	67.4	67	64.4	24.2	8.5	11.5	15
RVCP4-01	4	R1/8	8	71.5	68.9	67.5	64.9	24.7	9	11.5	15
RVCP6-M5	6	M5 x 0.8	3	70	67.4	67	64.4	24.2	8.5	11.5	15
RVCP6-01		R1/8	8	71.5	68.9	67.5	64.9	24.7	9	11.5	15
RVCP6-02		R1/4	11	78.2	75.6	72.2	69.6	29	11	15.5	19
RVCP8-01	8	R1/8	8	71.5	68.9	67.5	64.9	24.7	9	15.5	15
RVCP8-02	8	R1/4	11	78.2	75.6	72.2	69.6	29	11	15.5	19

Unit: mm

Type	Tube stop C	E1	E2	Width across flats H	K	Release ring			Weight (g)
						⌀Z	X	Y
RVCP4-M5	11	20.7	8.5	14	6	-	9.8	7.8	26
RVCP4-01					5
RVCP6-M5	11.6	21.1	8.5	14	6	-	11.8	9.8	26
RVCP6-01					5
RVCP6-02	17	29.8	10.5	17	6	11.8	-	-	46
RVCP8-01	18.1	27.7	8.5	14	5	13.8	-	-	29
RVCP8-02		29.7	10.5	17	6				46

* The L1 and L2 dimensions of the tapered thread type are reference dimensions after tightening the thread.

RVCMP Elbow with Pressure Gauge

Unit: mm

Type	Tube outer diameter ⌀D	R	A	B		L1		L2	L3	L4	⌀p1	⌀p2
Type	Tube outer diameter ⌀D	R	A	Max.	Min.	Max.	Min.	L2	L3	L4	⌀p1	⌀p2
RVCMP4-M5	4	M5 x 0.8	3	70	67.4	67	64.4	48.7	24.2	8.5	11.5	15
RVCMP4-01	4	R1/8	8	71.5	68.9	67.5	64.9	49.2	24.7	9	11.5	15
RVCMP6-M5	6	M5 x 0.8	3	70	67.4	67	64.4	48.7	24.2	8.5	11.5	15
RVCMP6-01		R1/8	8	71.5	68.9	67.5	64.9	49.2	24.7	9	11.5	15
RVCMP6-02		R1/4	11	78.2	75.6	72.2	69.6	56.3	29	11	15.5	19
RVCMP8-01	8	R1/8	8	71.5	68.9	67.5	64.9	52	24.7	9	15.5	15
RVCMP8-02	8	R1/4	11	78.2	75.6	72.2	69.6	56.3	29	11	15.5	19

Unit: mm

Type	Tube stop C	E1	E2	E3	Width across flats H	K	Release ring			Weight (g)
							⌀Z	X	Y
RVCMP4-M5	11	26.3	8.5	16.2	14	6	-	9.8	7.8	29
RVCMP4-01						5
RVCMP6-M5	11.6	26.7	8.5	16.2	14	6	-	11.8	9.8	29
RVCMP6-01						5
RVCMP6-02	17	30	10.5	17.7	17	6	11.8	-	-	49
RVCMP8-01	18.1	28.4	8.5	16.2	14	5	13.8	-	-	31
RVCMP8-02		29.9	10.5	17.7	17	6				49

* The L1 and L2 dimensions of the tapered thread type are reference dimensions after tightening the thread.

RVUP Union

Unit: mm

Type	Tube outer diameter ⌀D1	Tube outer diameter ⌀D2	B		L1	L2	L3	⌀p1	⌀p2	⌀p3	Tube stop C1	Tube stop C2	E1	E2
			Max.	Min.
RVUP4-4	4	4	61.6	59	13	18.8	1	11.5	11.5	15	11	11	21.6	21.6
RVUP6-4	6	4	61.6	59	13	18.8	1	11.5	11.5	15	11.6	11	22	21.6
RVUP6-6		6										11.6		22
RVUP8-6	8	6	65.7	63.1	15	22.5	-	15.5	15.5	19	18.1	17	28.6	28.7
RVUP8-8		8										18.1		28.6

Unit: mm

Type	F1	F2	F3	F4	F5	F6	F7	T1	T2	Release ring						Weight (g)
										⌀Z1	X1	Y1	⌀Z2	X2	Y2
RVUP4-4	15	30	4.2	17	10.3	20.6	8	24.5	15	-	9.8	7.8	-	9.8	7.8	19
RVUP6-4	15	30	4.2	17	10.3	20.6	9	24.5	15	-	11.8	9.8	-	9.8	7.8	20
RVUP6-6														11.8	9.8
RVUP8-6	19.8	39.6	4	21.5	11.7	23.4	13	28.4	19	13.8	-	-	11.8	-	-	32
RVUP8-8													13.8			33

*The mounting holes and mounting dimensions are unchanged from the current model.

RVUMP Union with Pressure Gauge

Unit: mm

Type	Tube outer diameter ⌀D1	Tube outer diameter ⌀D2	B		L1	L2	L3	L4	⌀p1	⌀p2	⌀p3	Tube stop C1	Tube stop C2	E1	E2
			Max.	Min.
RVUMP4-4	4	4	61.6	59	43.3	13	18.8	1	11.5	11.5	15	11	11	21.6	30.6
RVUMP6-4	6	4	61.6	59	43.3	13	18.8	1	11.5	11.5	15	11.6	11	22	30.6
RVUMP6-6		6											11.6		31
RVUMP8-6	8	6	65.7	63.1	49.8	15	22.5	-	15.5	15.5	19	18.1	17	28.6	33
RVUMP8-8		8											18.1		32.9
RVUMP1/4-1/4	1/4	1/4	61.6	59	43.3	13	18.8	1	11.5	11.5	15	11.4	11.4	22.2	31.2

Unit: mm

Type	F1	F2	F3	F4	F5	F6	F7	F8	T1	T2	Release ring						Weight (g)
											⌀Z1	X1	Y1	⌀Z2	X2	Y2
RVUMP4-4	15	30	4.2	17	10.1	20.2	10.2	9	24.5	15	-	9.8	7.8	-	9.8	7.8	23
RVUMP6-4	15	30	4.2	17	10.1	20.2	10.2	9	24.5	15	-	11.8	9.8	-	9.8	7.8	23
RVUMP6-6															11.8	9.8
RVUMP8-6	19.9	39.7	4.1	21.3	11.6	23.2	9.1	13	28.4	19	13.8	-	-	11.8	-	-	36
RVUMP8-8														13.8
RVUMP1/4-1/4	15	30	4.2	17	10.1	20.2	10.2	9	24.5	15	-	11.8	9.8	-	11.8	9.8	23

*The mounting holes and mounting dimensions are unchanged from the current model.

Product Specification

Tube size	Metric size	Inch size
Operating fluid	Air
Operating pressure range	0-1.0 MPa	0 to 145 psi
Set pressure range	0.1-0.8 MPa	14.5-116 psi
Indicated pressure range	0 to 0.8 MPa	0 to 116 psi
Accuracy (gauge)	+/- 5% (F.S)
Operating temperature range	0 to 60℃ (no freezing)

*For inch-size models, the pressure gauge unit is psi.

Structural Drawing

■ elbow type: for RVCP

Pressure Regulating Valve Method

1. Adjusting the pressure

Release the lock by pulling the regulating knob upward before adjusting the pressure.
Do not apply more force than necessary to the pressure regulating knob at this time. This may cause damage.

Regulator Push-Lock Type Pressure Regulating Valve Adjustment Method

2. When increasing the pressure

Turn the regulating knob clockwise from the fully open position to increase the pressure.
Once the desired pressure is reached, be sure to press the regulating knob and lock it to prevent the set pressure from changing.

3. Decreasing the pressure

If the regulating knob is turned too far (if the pressure is too high), turning it counterclockwise will activate the relief mechanism and decrease the pressure.
  Following this, adjust as described in "2. Increasing the pressure."
  Once the desired pressure is reached, be sure to press the adjustment knob and lock it to prevent the set pressure from changing.

Precautions

Warning

1. Do not use the regulator in such a way that the pressure exceeds the preset level due to large pressure fluctuations on the outlet side. This product is not designed as a relief valve, and using it as one may cause equipment damage or malfunction. In such cases, please install a separate safety device before use.

Caution

1. Perform the pressure setting by turning the regulating knob in the upward direction (clockwise). The pressure cannot be set accurately if the regulating knob is turned in the downward direction (counterclockwise).

2. Do not turn the regulating knob counterclockwise from a fully open position, or too far clockwise from a fully closed position. Doing so may damage the regulating knob or the main body. It can also increase the torque on the regulating knob due to the sticking of the regulating screw and regulating nut.

3. The regulating knob locks when pushed down and releases when pulled up. After adjusting, be sure to set it to the locked position. Failure to lock the knob means the knob may turn, causing the pressure to change.

4. When you press down the regulating knob, it can sometimes stop partway between the locked and unlocked positions depending on how far round it is rotated. When this happens, the knob is not completely locked. Please ensure that the regulating knob is fully pushed down to the locked position.

5. Trying to force the knob to turn while it is in the locked position may cause damage to the lock mechanism.

6. For models with a gauge, the gauge can be oriented in any direction. Applying excessive force to the gauge cap can result in damage to the gauge and cause issues with gauge readings. Please hold the gauge close to the base when turning it.

7. The pressure gauge accuracy is +/- 5% (FS). If greater accuracy is required, please check the pressure using a separate pressure gauge and adjust accordingly.

8. When open air is released from the outlet, the flow rate may cause resonance. Avoid releasing open air on the outlet for prolonged periods of time, as this poses a risk of internal damage or other issues.

: 30; 45; 60

Part Number
RVCMP6-02

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Shape	Supply Side, Connection Type	Supply Side, Connection Dia.	Control Side, Connection Dia.	Pressure Gauge
	MYR 144.99	1 Piece(s)	Available	13 Day(s) or more	[Single-Action Fitting Type] One-Touch Coupling Type Elbow with Gauge	R	1/4	φ6	With Gage

Product TOP

Basic Information

Regulator, Pressure Boosting Valve	Regulator	Regulator Type	With Check valve	Applicable Fluid	Air
Operating Environment	Standard	Set Pressure Range(MPa)	0.1~0.8	Exhaust Mechanism	Presence
Adverse Current Function	Presence	Operating Pressure Range(MPa)	0:: 1.0	Control Side, Connection Type	One-Touch

Please check the type/dimensions/specifications of the part RVCMP6-02 in the Regulator Push-Lock Type series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- RVCMP
- RVCP
- RVUMP
- RVUP
Clear
Shape
- Single-Action Fitting Type
  - One-Touch Coupling Type Elbow
  - One-Touch Coupling Type Elbow with Gauge
  - One-Touch Coupling Type Unions Straight
  - One-Touch Coupling Type Unions with Gauge
Clear
Supply Side, Connection Type
- One-Touch
- Others
- R
Clear
Supply Side, Connection Dia.
M5

1/8

1/4

φ4

φ6

φ8

φ1/4
Clear
Control Side, Connection Dia.
φ4

φ6

φ8

φ1/4
Clear
Pressure Gauge
- No
- With Gage
Clear

Days to Ship

All

10 Day(s) or Less

13 Day(s) or Less

15 Day(s) or Less

16 Day(s) or Less

18 Day(s) or Less

20 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
RVCMP4-01
RVCMP4-M5
RVCMP6-01
RVCMP6-M5
RVCMP8-01
RVCMP8-02

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Shape	Supply Side, Connection Type	Supply Side, Connection Dia.	Control Side, Connection Dia.	Pressure Gauge
MYR 130.31	1 Piece(s)	Available	15 Day(s) or more	[Single-Action Fitting Type] One-Touch Coupling Type Elbow with Gauge	R	1/8	φ4	With Gage
MYR 118.38	1 Piece(s)	Available	15 Day(s) or more	[Single-Action Fitting Type] One-Touch Coupling Type Elbow with Gauge	Others	M5	φ4	With Gage
MYR 137.74	1 Piece(s)	Available	15 Day(s) or more	[Single-Action Fitting Type] One-Touch Coupling Type Elbow with Gauge	R	1/8	φ6	With Gage
MYR 124.26	1 Piece(s)	Available	18 Day(s) or more	[Single-Action Fitting Type] One-Touch Coupling Type Elbow with Gauge	Others	M5	φ6	With Gage
MYR 142.15	1 Piece(s)	Available	15 Day(s) or more	[Single-Action Fitting Type] One-Touch Coupling Type Elbow with Gauge	R	1/8	φ8	With Gage
MYR 150.87	1 Piece(s)	Available	15 Day(s) or more	[Single-Action Fitting Type] One-Touch Coupling Type Elbow with Gauge	R	1/4	φ8	With Gage

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Regulator Push-Lock Type (RVCMP6-02)

(i)Caution

Drawing

RVCP elbow

RVCMP Elbow with Pressure Gauge

RVUP Union

RVUMP Union with Pressure Gauge

Product Specification

Structural Drawing

Pressure Regulating Valve Method

Precautions

Warning

Caution

Basic Information

Configure

Specification/Dimensions

type

Shape

Supply Side, Connection Type

Supply Side, Connection Dia.

Control Side, Connection Dia.

Pressure Gauge

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm