(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Brushless Motor BMU Series (Part Numbers)
[Brand] Oriental Motor
[Power supply voltage]
· Single-phase 100-120 V
· Three-phase 200-240 V
· Single-phase 200-240 / Three-phase 200-240 V
[Features]
· Kurukuru Pon. Easy speed control
· Easy wiring. Start immediately
· Maximum rotational speed 4,000 r/min, speed ratio 1:50 (2.5 times higher than previous models)
· By opening the driver's front panel, you can set various functions
Drawing
Driver (Common for cable type and connector type)
■ 30W, 60W, 120W / BMUD30-A2, BMUD30-C2, BMUD60-A2, BMUD60-C2, BMUD120-A2, BMUD120-C2
■ 200W, 300W, 400W / BMUD200-A, BMUD200-C, BMUD300-C, BMUD400-S
Product Specification
General Specifications
| Items | Driver | |
|---|---|---|
| Insulation resistance | After continuous operation at normal temperature and humidity, the value measured with a 500 V DC ohmmeter between the power supply terminal and protective earth terminal, and between the power supply terminal and input/output signal terminal, is 100 MΩ or more. | |
| Dielectric strength | After continuous operation at normal temperature and humidity, no abnormality is observed even if 1.5 kV AC at 50 Hz is applied for 1 minute between the power supply terminal and protective earth terminal, and between the power supply terminal and input/output terminals. | |
| Temperature rise | After rated continuous operation at normal temperature and humidity, the temperature rise of the heat sink measured by the thermocouple method is 50°C or less. | |
| Operating environment | Ambient temperature | 0 to +40°C (No freezing) [Only when the front side of the 300W or 400W type driver is installed in the upward orientation: 0 to +35°C (No freezing)] |
| Ambient humidity | 85% or less (No condensation) | |
| Altitude | 1,000 m or less above sea level | |
| Environment | No corrosive gases or dust. No contact with oil. Cannot be used in a special environment such as radioactive area, magnetic field, and vacuum. | |
| Vibration | Continuous vibration or excessive shock must not be applied. Compliant with JIS C60068-2-6 "Sine-wave vibration test method". Frequency range: 10 to 55 Hz, Half amplitude: 0.15 mm, Sweep direction: 3 directions (X, Y, Z), Number of sweeps: 20 times | |
| Storage Environment *1 | Ambient temperature | -25 to +70°C (no freezing) |
| Ambient humidity | 85% or less (No condensation) | |
| Altitude | Altitude: 3,000 m or lower (For JV gear, JB gear, and JH gear: 1,000 m or lower) | |
| Environment | No corrosive gases or dust. No direct contact with water or oil. Cannot be used in a special environment such as radioactive area, magnetic field, and vacuum. | |
| Heat-resistant class | - | |
| Protection Rating | IP20 | |
*1 The storage environment value is for a short period, including during transportation.
Weight
| Part number | Weight |
|---|---|
| BMUD30-A2 | 0.4 kg |
| BMUD30-C2 | |
| BMUD60-A2 | |
| BMUD60-C2 | |
| BMUD120-A2 | |
| BMUD120-C2 |
| Part number | Weight |
|---|---|
| BMUD200-A | 0.8 kg |
| BMUD200-C | |
| BMUD300-C | |
| BMUD400-S |
Cautions and Prohibitions
- Do not perform insulation resistance measurement or pressure resistance test while the motor and driver are connected.
| Part Number |
|---|
| BMUD30-A2 |
| BMUD30-C2 |
| BMUD60-A2 |
| BMUD60-C2 |
| BMUD120-A2 |
| BMUD120-C2 |
| BMUD200-C |
| BMUD300-C |
| BMUD400-C |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Output Details (W) | Power Supply Voltage | Serial Number | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
MYR 988.80 | 1 Piece(s) | 12 Day(s) or more | 30 | Single-phase 100 to 120 V | 2 | - | ||
MYR 988.80 | 1 Piece(s) | 12 Day(s) or more | 30 | Single-phase 200 to 240 / Three-phase 200 to 240 | 2 | - | ||
MYR 1,023.40 | 1 Piece(s) | 12 Day(s) or more | 60 | Single-phase 100 to 120 V | 2 | - | ||
MYR 1,023.40 | 1 Piece(s) | 12 Day(s) or more | 60 | Single-phase 200 to 240 / Three-phase 200 to 240 | 2 | - | ||
MYR 1,140.73 | 1 Piece(s) | 12 Day(s) or more | 120 | Single-phase 100 to 120 V | 2 | - | ||
MYR 1,140.73 | 1 Piece(s) | 12 Day(s) or more | 120 | Single-phase 200 to 240 / Three-phase 200 to 240 | 2 | - | ||
MYR 1,278.09 | 1 Piece(s) | 12 Day(s) or more | 200 | Single-phase 200 to 240 / Three-phase 200 to 240 | None | - | ||
MYR 1,226.95 | 1 Piece(s) | 15 Day(s) or more | 300 | Single-phase 200 to 240 / Three-phase 200 to 240 | None | - | ||
MYR 1,431.78 | 1 Piece(s) | 20 Day(s) or more | 400 | Single-phase 200 to 240 V | None | 0.8 |
Loading...
Basic Information
| Type | Driver Unit |
|---|
Specification/Dimensions
-
Output Details(W)
- 30
- 60
- 120
- 200
- 300
- 400
-
Power Supply Voltage
- Single-phase 100 to 120 V
- Single-phase 200 to 240 V
- Single-phase 200 to 240 / Three-phase 200 to 240
-
Serial Number
- 2
- None
-
type
- BMU
Days to Ship
-
- All
- 12 Day(s) or Less
- 15 Day(s) or Less
- 20 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- BLDC Standard- Parallel Gearhead & Right Angle
- BLDC High-Efficiency - Parallel (L Type) & Hollow Gearhead
- BLDC High-Efficiency - Parallel & Solid Shaft Gearhead
- BLDC High Torque- Parallel (L Type) & Hollow Gearhead
- Brushless Motor Unit, BLE Series
- Brushless Motor Unit BXII Series
- Brushless Motor, Driver Single Unit, BLH Series
- DC Brushless Motor (AC), BLM Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy