Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Brushless Motor BLM Series

[Brand]Oriental Motor
[Voltage Specifications]
· 100 V AC
· 200 V AC
[Gear head]
· Parallel shaft gear head
· Hollow shaft flat gearhead
[Features]
· New Connector
· Equipped with stainless steel shaft as standard
· Cable with selectable drawer direction for direct connection
· Compact, high output, and high efficiency design
· Compatible with H1 grease for food machinery (only for connector type parallel shaft gear head GFV gear)
· Significantly improved unit efficiency of motor and driver
· Motor and gearhead are pre-assembled

(i)Caution

This product image is representative only. Please see the product specifications for details.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Drawing

Parallel Shaft Gearhead GFV Gear, 30W

■ Motor (Cable Connection Type)

Drawing 1 of Brushless Motor, BLM Series

■ Motor (Connector Type)

Drawing 3 of Brushless Motor, BLM Series

*Diagram when the separately sold connection cable is attached.

Product Specification

Parallel Shaft Gearhead GFV Gear, 30W

■ Specifications

Part number	Motor	Cable Type	BLM230-*B
	Motor	Connector type	BLM230HP-S/BLM230HP-SF
	Driver		BMUD30-A2	BMUD30-C2
Rated Output (Continuous)		W	30
Power supply input	Rated Voltage	V	Single-phase 100-120	Single-phase 200-240 / Three-phase 200-240
	Allowable Voltage Variation Range	-	-15 to +10%
	Frequency	Hz	50/60 (Hz)
	Allowable Range of Frequency	-	+/- 5%
	Rated input current	A	1.2	Single-phase: 0.7 / Three-phase: 0.38
	Maximum Input Current	A	2.0	Single-phase: 1.2 / Three-phase: 0.75
Rated Rotational Speed		[r/min]	3,000
Velocity Control Range			80 to 4,000 r/min (speed ratio 1:50)
Speed Fluctuation Rate	Against Load		+/- 0.2% or less under the following conditions: 0 to rating torque, rating rotating speed, rating voltage, normal temperature
	Compatible voltage		+/- 0.2% or less under the following conditions: -15 to +10% of rated voltage, rated rotational speed, no load, normal temperature
	Compatible temperature		+/- 0.2% or less under the following conditions: operating ambient temperature 0 to +40°C, rated rotational speed, no load, rated voltage

*The values for each specification and characteristic are the characteristics of the motor alone.

Part number	Part number of motor	Part number of gearhead	Reduction ratio	Weight (kg)
BLM230-*B	BLM230-GFV2	GFV2G*	5 to 20	0.7
			30 to 100	0.75
			200	0.8
BLM230HP-S BLM230HP-SF	BLM230HP-GFV	GFV2GS GFV2GSF	5 to 20	0.63
			30 to 100	0.68
			200	0.73

*The listed mass does not include the mass of the connection cable. (connector type)
*The numeral replacing the asterisk in the part numbers represents the reduction ratio.
*"Mounting screws" are included.

■ Reduction ratio

*1 The rotating speed of the output shaft is the value obtained by dividing the rotating speed by the reduction ratio.
*3 This also applies when the deceleration time is set to less than 0.1 seconds in digital settings.

Specifications Table

Part number	Reduction ratio	L
BLM230-B BLM230HP-S BLM230HP-*SF	5 to 20	34
	30 to 100	38
	200	43

: 30; 45; 60

Part Number
BLM230-A2
BLM230-AC2
BLM230HP-5SF
BLM230HP-10SF
BLM230HP-15SF
BLM230HP-30SF
BLM230HP-50SF
BLM230HP-100SF
BLM230HP-200SF
BLM230HP-ACS
BLM230HP-AS
BLM230HP-GFV
BLM230HPM-GFV
BLM260-A2
BLM260-AC2
BLM260HP-ACS
BLM260HP-AS
BLM460S-GFV2
BLM460SHP-5SF
BLM460SHP-10SF
BLM460SHP-15SF
BLM460SHP-20SF
BLM460SHP-30SF
BLM460SHP-50SF
BLM460SHP-100SF
BLM460SHP-200SF
BLM460SHP-GFV
BLM460SHPK
BLM460SHPM-GFV
BLM5120-A2
BLM5120-AC2
BLM5120-GFV2
BLM5120HP-5SF
BLM5120HP-10SF
BLM5120HP-15SF
BLM5120HP-20SF
BLM5120HP-50SF
BLM5120HP-100SF
BLM5120HP-200SF
BLM5120HP-ACS
BLM5120HP-AS
BLM5120HP-GFV
BLM5120HPK
BLM5120HPM-ACS
BLM5120HPM-AS
BLM5120HPM-GFV
BLM5200-A
BLM5200-AC
BLM5200HP-ACS
BLM5200HP-AS
BLM5200HPK
BLM5200HPM-ACS
BLM5200HPM-AS
BLM5300-A
BLM5300-AC
BLM5300HP-ACS
BLM5300HP-AS
BLM5300HPK
BLM5400-A
BLM5400-AC

Standard Unit Price	Minimum order quantity	Days to Ship	Type	Motor Type	Main Body Shape	Square Flange Dim. A (mm)	Rated Output (W)	Voltage Specifications	Power Supply	Gear Head Type	Velocity Control Range (r/min)	Electromagnetic Brakes	Shaft End Shape	Reduction Ratio	Motor Protection Structure	Identification Part Number	Motor Connection Method	Output Shaft Material	Specifications	Mounting Screws	Weight (kg)
MYR 726.09	1 Piece(s)	17 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 760.69	1 Piece(s)	22 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 2,109.20	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	5	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,109.20	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	10	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,109.20	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	15	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,166.47	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	30	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,166.47	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	50	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,166.47	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	100	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,248.02	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	200	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 896.93	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC200 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 862.33	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC200 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 862.33	1 Piece(s)	12 Day(s) or more	Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	-	80 to 4000	No	Pinion Shaft Type	-	IP66	None	Connector type	-	-	-	-
MYR 1,899.58	1 Piece(s)	15 Day(s) or more	[Set] Motor Unit	Standard	Square	60	30	AC100 Type	Single-phase	-	-	Presence	Pinion Shaft Type	-	IP66	None	Connector type	-	-	-	0.65
MYR 814.40	1 Piece(s)	17 Day(s) or more	[Set] Motor Unit	Standard	Square	60	60	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 849.01	1 Piece(s)	22 Day(s) or more	[Set] Motor Unit	Standard	Square	60	60	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 984.93	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	60	60	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 950.34	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	60	60	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 817.52	1 Piece(s)	17 Day(s) or more	Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	-	80 to 4000	No	Pinion Shaft Type	-	IP40	S	Cable type	-	-	-	-
MYR 2,326.78	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	5	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,326.78	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	10	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,326.78	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	15	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,326.78	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	20	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,386.02	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	30	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,386.02	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	50	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,386.02	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	100	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,469.53	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	200	IP66	S	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 952.51	1 Piece(s)	12 Day(s) or more	Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	-	80 to 4000	No	Pinion Shaft Type	-	IP66	S	Connector type	-	-	-	-
MYR 1,146.32	1 Piece(s)	12 Day(s) or more	Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	-	80 to 3600	No	Round Shaft Type (With Key)	-	IP66	S	Connector type	-	-	-	-
MYR 1,961.35	1 Piece(s)	15 Day(s) or more	[Set] Motor Unit	Standard	Square	80	60	AC100 Type	Single-phase	-	-	Presence	Pinion Shaft Type	-	IP66	S	Connector type	-	-	-	0.86
MYR 1,013.69	1 Piece(s)	17 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 1,048.30	1 Piece(s)	22 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 1,013.69	1 Piece(s)	17 Day(s) or more	Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	-	80 to 4000	No	Pinion Shaft Type	-	IP40	None	Cable type	-	-	-	-
MYR 2,835.73	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	5	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,835.73	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	10	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,835.73	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	15	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,835.73	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	20	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,919.36	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	50	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,919.36	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	100	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 2,994.13	1 Piece(s)	28 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	Parallel Shafts	80 to 4000	No	-	200	IP66	None	Connector type	Stainless steel	Compatible with H1 grease for food machine	Attachment	-
MYR 1,183.61	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC200 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 1,149.00	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC200 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 1,149.00	1 Piece(s)	12 Day(s) or more	Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	-	80 to 4000	No	Pinion Shaft Type	-	IP66	None	Connector type	-	-	-	-
MYR 1,237.36	1 Piece(s)	12 Day(s) or more	Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	-	80 to 3600	No	Round Shaft Type (With Key)	-	IP66	None	Connector type	-	-	-	-
MYR 2,582.55	1 Piece(s)	15 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC200 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 2,553.67	1 Piece(s)	15 Day(s) or more	[Set] Motor Unit	Standard	Square	90	120	AC200 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 2,327.75	1 Piece(s)	12 Day(s) or more	Motor Unit	Standard	Square	90	120	AC100 Type	Single-phase	-	80 to 4000	No	Pinion Shaft Type	-	IP66	None	Connector type	-	-	-	-
MYR 1,236.89	1 Piece(s)	22 Day(s) or more	[Set] Motor Unit	Standard	Square	90	200	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 1,271.50	1 Piece(s)	22 Day(s) or more	[Set] Motor Unit	Standard	Square	90	200	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 1,406.80	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	90	200	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 1,372.20	1 Piece(s)	12 Day(s) or more	[Set] Motor Unit	Standard	Square	90	200	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 1,476.18	1 Piece(s)	12 Day(s) or more	Motor Unit	Standard	Square	90	200	AC100 Type	Single-phase	-	80 to 3600	No	Round Shaft Type (With Key)	-	IP66	None	Connector type	-	-	-	-
MYR 2,938.25	1 Piece(s)	15 Day(s) or more	[Set] Motor Unit	Standard	Square	90	200	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 2,904.57	1 Piece(s)	15 Day(s) or more	[Set] Motor Unit	Standard	Square	90	200	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 1,419.23	1 Piece(s)	20 Day(s) or more	Motor Unit	Standard	Square	90	300	100/200 V AC	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP40	Not Included	Cable type	Steel	-	Attachment	-
MYR 1,448.05	1 Piece(s)	16 Day(s) or more	[Set] Motor Unit	Standard	Square	90	300	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 1,582.65	1 Piece(s)	11 Day(s) or more	[Set] Motor Unit	Standard	Square	90	300	AC100 Type	Single-phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP66	None	Connector type	Stainless steel	-	Attachment	-
MYR 1,549.02	1 Piece(s)	15 Day(s) or more	Motor Unit	Standard	Square	90	300	100/200 V AC	Single-phase	-	80 to 4000	No	Round Shaft Type	-	IP66	Not Included	Connector type	Stainless steel	-	Attachment	-
MYR 1,549.02	1 Piece(s)	11 Day(s) or more	Motor Unit	Standard	Square	90	300	AC100 Type	Single-phase	-	80 to 3600	No	Round Shaft Type (With Key)	-	IP66	None	Connector type	-	-	-	-
MYR 1,529.29	1 Piece(s)	17 Day(s) or more	[Set] Motor Unit	Standard	Square	90	400	AC200 Type	Three-Phase	-	80 to 4000	No	Round Shaft Type	-	IP40	None	Cable type	Steel	-	Attachment	-
MYR 1,563.89	1 Piece(s)	22 Day(s) or more	[Set] Motor Unit	Standard	Square	90	400	AC200 Type	Three-Phase	-	80 to 4000	No	Round Shaft Type (Milling machine cut processing)	-	IP40	None	Cable type	Steel	-	Attachment	-

Product TOP

Configure

73 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Type
- Motor Unit
- Set
  - Motor Unit
Clear
Motor Type
- Standard
Clear
Main Body Shape
- Square
Clear
Square Flange Dim. A(mm)
60

80

90

110
Clear
Rated Output(W)
30

60

120

200

300

400
Clear
Voltage Specifications
- AC100 Type
- AC200 Type
- 100/200 V AC
Clear
Power Supply
Single-phase

Three-Phase
Clear
Gear Head Type
- Parallel Shafts
Clear
Velocity Control Range(r/min)
80 to 3600

80 to 4000
Clear
Electromagnetic Brakes
- No
- Presence
Clear
Shaft End Shape
- Pinion Shaft Type
- Round Shaft Type
- Round Shaft Type (Milling machine cut processing)
- Round Shaft Type (With Key)
Clear
Reduction Ratio
5

10

15

20

30

50

100

200
Clear
Motor Protection Structure
- IP40
- IP66
- IP67
Clear
Identification Part Number
- None
- Not Included
- S
Clear
Motor Connection Method
- Cable type
- Connector type
Clear
Output Shaft Material
- Stainless steel
- Steel
Clear
Specifications
- Compatible with H1 grease for food machine
Clear
Mounting Screws
- Attachment
Clear
type
- BLM2*
- BLM4*
- BLM5*
- BLM6*
- BLM7*
Clear

Days to Ship

All

11 Day(s) or Less

12 Day(s) or Less

15 Day(s) or Less

16 Day(s) or Less

17 Day(s) or Less

20 Day(s) or Less

22 Day(s) or Less

28 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Brushless Motor BLM Series

(i)Caution

Drawing

Parallel Shaft Gearhead GFV Gear, 30W

Product Specification

Parallel Shaft Gearhead GFV Gear, 30W

Specifications Table

Configure

Specification/Dimensions

Type

Motor Type

Main Body Shape

Square Flange Dim. A(mm)

Rated Output(W)

Voltage Specifications

Power Supply

Gear Head Type

Velocity Control Range(r/min)

Electromagnetic Brakes

Shaft End Shape

Reduction Ratio

Motor Protection Structure

Identification Part Number

Motor Connection Method

Output Shaft Material

Specifications

Mounting Screws

type

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm