(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Stepper Motor AZ Series
[Features]
· Equipped with newly developed ABZO sensor
· No external sensor required
· Reduced home return time
· No battery required
· Energy saving and low heat generation
· Three driver options to match your system configuration
· Easy operation enabled by the MEXE02 data setting software
Japanese Only
Drawing
AC power supply input: Standard type
· Motor
AZM46AC
AZM48AC
AZM66AC/AZM69AC
AZM98AC/AZM911AC
· Driver
The drawing is of a type with built-in positioning function. External dimensions and accessories are common to all driver types.
Product Specification
General Specifications
*1. Only for models with electromagnetic brake
*2. According to Oriental Motor measurement conditions
*3. When a heat sink equivalent to or larger than a 200×200 mm, 2 mm thick aluminum board is attached
*4. T.I.R (Total Indicator Reading): Indicates the total dial gauge reading when the measurement section is rotated once around the reference shaft center.
[Cautions]
- When measuring insulation resistance or conducting dielectric strength tests, disconnect the motor from driver. Also, do not perform these tests on the ABZO sensor section of the motor.
Specifications: AC power supply input
■Standard type: Mounting angle dimensions 42 mm, 60 mm, 85 mm
* 1. The values in parentheses are when a motor with an electromagnetic brake is connected.
* 2. The motor with electromagnetic brake has a specification of 24 V DC +/- 4% when extended by 20 m using a cable.
· Motor
| Mounting hole square dimension mm | Part number | L | Weight kg |
|---|---|---|---|
| 42 | AZM46AC | - | 0.44 |
| AZM48AC | - | 0.68 | |
| 60 | AZM66AC | 72 | 0.91 |
| AZM69AC | 97.5 | 1.4 | |
| 85 | AZM98AC | 84 | 1.9 |
| AZM911AC | 114 | 3 |
· Driver
- Weight: 0.65 kg
[Accessories]
- Main power supply / regenerative resistor connector (CN4)
Connector: 05JFAT-SAXGDK-H5.0 (J.S.T. MFG. CO., LTD.)
Connector connection lever - Input/output signal connector (CN5)
Connector: DFMC1,5/12-ST-3,5 (Phoenix Contact Co., Ltd.) - 24 V DC power supply input, electromagnetic brake connection, regenerative resistor thermal input, power cutoff signal input/output connector (CN1)
Connector: DFMC1,5/7-ST-3,5-LR (Phoenix Contact Co., Ltd.)
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Type Details | Type | Square Flange Size A (mm) | Power Supply | Voltage Specifications | Control Method | Step Angle (°) | 励磁最大静止トルク（範囲） (N･m) | Excitation maximum static torque (details) (N·m) | Reducer | Drive Method | Backlash (°) | Excitation maximum static torque (classification) (N·m) | Electromagnetic Brake | Driver Type | Reduction Ratio | Shaft Shape | Gearhead Type | Motor Case Length | Identification | Additional Functions | Output Shaft Type | Cable Exit Direction | Number of Shafts | Network Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 6,325.55 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 42 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.0072 | - | 8.3 | Presence | Bipolar | - | Up to 10 | N/A | - | 50 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 6,325.55 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 42 | Single-phase | DC Specifications | Closed Loop | 0.0072 | - | 8.3 | Presence | Bipolar | - | Up to 10 | N/A | - | 50 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 7,409.91 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 42 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.0072 | - | 8.3 | Presence | Bipolar | - | Up to 10 | Available | - | 50 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 7,409.91 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 42 | Single-phase | DC Specifications | Closed Loop | 0.0072 | - | 8.3 | Presence | Bipolar | - | Up to 10 | Available | - | 50 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 4,630.17 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Downward direction | - | - | ||
MYR 4,630.17 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 5,823.40 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 5.9 | Presence | Bipolar | 0.05 | Up to 10 | N/A | - | 5 | Single shaft | HPG | 6 | - | - | Shaft output | - | - | - | ||
MYR 5,707.01 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 5.9 | Presence | Bipolar | 0.05 | Up to 10 | N/A | - | 5 | Single shaft | HPG | 6 | - | - | Flange output | - | - | - | ||
MYR 6,880.55 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 9 | Presence | Bipolar | 0.05 | Up to 10 | N/A | - | 15 | Single shaft | HPG | 6 | - | - | Shaft output | - | - | - | ||
MYR 6,764.91 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 9 | Presence | Bipolar | 0.05 | Up to 10 | N/A | - | 15 | Single shaft | HPG | 6 | - | - | Flange output | - | - | - | ||
MYR 7,491.08 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | - | Up to 10 | N/A | - | 50 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 7,491.08 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 10 | Presence | Bipolar | - | Up to 10 | N/A | - | 100 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 4,694.59 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 25 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 4,694.59 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 36 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 4,694.59 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 50 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 3,321.31 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | - | - | - | ||
MYR 3,561.40 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Left direction | - | - | ||
MYR 3,561.40 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Rightward direction | - | - | ||
MYR 3,561.40 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.036 | - | 3.5 | Presence | Bipolar | 0.25 | Up to 10 | N/A | - | 10 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.036 | - | 3.5 | Presence | Bipolar | 0.25 | Up to 10 | N/A | - | 10 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.018 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.018 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 6,634.55 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.072 | - | 3.5 | Presence | Bipolar | - | Up to 10 | N/A | - | 5 | Single shaft | PN | 6 | - | - | - | - | - | - | ||
MYR 4,808.53 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.072 | - | 3.5 | Presence | Bipolar | 0.12 | Up to 10 | N/A | - | 5 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 5,347.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.0144 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 25 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 5,347.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.01 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 36 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 5,347.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.0072 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 50 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Downward direction | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Left direction | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Rightward direction | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Upward direction | - | - | ||
MYR 4,630.17 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Downward direction | - | - | ||
MYR 4,630.17 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 6,880.55 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 9 | Presence | Bipolar | 0.05 | Up to 10 | N/A | - | 15 | Single shaft | HPG | 6 | - | - | Shaft output | - | - | - | ||
MYR 6,764.91 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 9 | Presence | Bipolar | 0.05 | Up to 10 | N/A | - | 15 | Single shaft | HPG | 6 | - | - | Flange output | - | - | - | ||
MYR 7,491.08 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | - | Up to 10 | N/A | - | 50 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 7,491.08 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 10 | Presence | Bipolar | - | Up to 10 | N/A | - | 100 | Single shaft | Harmonic | 6 | - | - | - | - | - | - | ||
MYR 4,694.59 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 25 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 4,694.59 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 36 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 4,694.59 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 50 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 3,321.31 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | - | - | - | ||
MYR 3,561.40 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Left direction | - | - | ||
MYR 3,561.40 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Rightward direction | - | - | ||
MYR 3,561.40 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.36 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.036 | - | 3.5 | Presence | Bipolar | 0.25 | Up to 10 | N/A | - | 10 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.036 | - | 3.5 | Presence | Bipolar | 0.25 | Up to 10 | N/A | - | 10 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.018 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 4,920.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.018 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 20 | Single shaft | FC | 6 | Solid shaft | - | - | Upward direction | - | - | ||
MYR 6,634.55 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.072 | - | 3.5 | Presence | Bipolar | - | Up to 10 | N/A | - | 5 | Single shaft | PN | 6 | - | - | - | - | - | - | ||
MYR 4,808.53 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.072 | - | 3.5 | Presence | Bipolar | 0.12 | Up to 10 | N/A | - | 5 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 5,347.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.0144 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 25 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 5,347.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.01 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 36 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 5,347.89 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.0072 | - | 8 | Presence | Bipolar | 0.15 | Up to 10 | N/A | - | 50 | Single shaft | PS | 6 | - | - | - | - | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Downward direction | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Left direction | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Rightward direction | - | - | ||
MYR 3,825.27 | 1 Piece(s) | 30 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase | DC Specifications | Closed Loop | 0.012 | - | 6 | Presence | Bipolar | 0.17 | Up to 10 | N/A | - | 30 | Single shaft | TS | 6 | - | - | - | Upward direction | - | - | ||
MYR 5,976.47 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | Available | - | 20 | - | FC | 6 | Solid shaft | - | - | Downward direction | - | - | ||
MYR 5,976.47 | 1 Piece(s) | 17 Day(s) or more | Motor Unit | Motor Only | 60 | Single-phase / Three-phase | AC200 Type | Closed Loop | 0.36 | - | 7 | Presence | Bipolar | 0.17 | Up to 10 | Available | - | 20 | - | FC | 6 | Solid shaft | - | - | Upward direction | - | - |
Loading...
Specification/Dimensions
-
Type Details
- Driver Unit
- Motor Unit
-
Type
- Motor Only
- Driver Only
-
Square Flange Size A(mm)
-
Power Supply
-
Voltage Specifications
-
Control Method
- Closed Loop
-
Step Angle(°)
-
励磁最大静止トルク（範囲）(N･m)
- 0.11 to 1.00
-
Excitation maximum static torque (details)(N·m)
-
Reducer
- No
- Presence
-
Drive Method
- Bipolar
-
Backlash(°)
-
Electromagnetic Brake
- Available
- N/A
-
Driver Type
- Pulse train input type with RS-485 communication
- Multi-axis driver
- Positioning function built-in type
- Pulse train input type
-
Reduction Ratio
-
Shaft Shape
- Single shaft
-
Gearhead Type
- FC
- HPG
- Harmonic
- PN
- PS
- Standard
- TS
-
Motor Case Length
-
Identification
- Solid shaft
-
Additional Functions
- Round shaft with shaft flat on one side
- Straight
- With Key
-
Output Shaft Type
- Flange output
- Shaft output
-
Cable Exit Direction
- Downward direction
- Left direction
- Rightward direction
- Upward direction
-
Number of Shafts
- 2
- 3
- 4
-
Network Type
- EtherCAT
- EtherNet/IP
- MECHATROLINK-III
- SSCNETIII/H
-
type
- AZD
- AZM
-
Excitation maximum static torque (classification)(N·m)
Days to Ship
-
- All
- 2 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 15 Day(s) or Less
- 17 Day(s) or Less
- 18 Day(s) or Less
- 20 Day(s) or Less
- 25 Day(s) or Less
- 30 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Stepper Motor for Units
- VEXTA Accessory
- 42 Series 2-Phase, High Torque Hybrid Stepper Motor, Step Angle 1.8°
- 110 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
- Stepper Motor □42 mm (Thin Type)
- External Resistor Module for Motors
- Stepper Motor, UPKW Series
- Controller DC Type, AZ Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy