Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Fiber Coaxial Displacement Sensor [ZW-8000/7000/5000]

OMRON

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Dimensional Drawing

Sensor Head

Rectangular Straight Type

Part number	W.D.	M
Model ZW-S8010	10	0.5
Model ZW-S8020	20	1
Model ZW-S8030	30	2

Length specifications	L
0.3 m	(300)
2M	(2,000)

*Please refer to the digital catalog for information on part numbers other than those listed above.

Product Specifications

Ratings/Performance

Sensor Controller

Item				Specifications
Item				Model ZW-8000□	Model ZW-7000□	Model ZW-5000□
Input/Output Type				NPN/PNP Compatible
Number of Sensor Heads Connectable				1 unit
Compatible Sensor Heads				Model ZW-S80□□/ ZW-SP80□□/ ZW-SPR80□□	Model ZW-S70□□/ ZW-SP70□□/ ZW-SPR70□□	ZW-S50□□/ ZW-SP50□□/ ZW-SPR50□□
Compatible Sensor Heads				Model ZW-S80□□/ ZW-SP80□□/ ZW-SPR80□□	Model ZW-S70□□/ ZW-SP70□□/ ZW-SPR70□□	ZW-S50□□/ ZW-SP50□□/ ZW-SPR50□□
LED Safety				Risk Group 3 (IEC62471)
Segment Display	Main Digital Display			11-segment white display, 6 digits
Segment Display	Sub Digital Display			11-segment green display, 6 digits
Indicator Light	Status Indicator Light			HIGH (orange), PASS (green), LOW (orange), STABILITY (green), ZERO (green), ENABLE (green), THRESHOLD-H (orange), THRESHOLD-L (orange), RUN (green)
	Status Indicator Light
	EtherCAT Indicators			ECAT RUN (green), L/A IN (Link/Activity IN) (green), L/A OUT (Link/Activity OUT) (green), ECAT ERR (red)
	EtherCAT Indicators
External Interface	Ethernet			100BASE-TX/10BASE-T No Procedure (TCP/UDP), EtherNet/IP
	EtherCAT			EtherCAT Dedicated Protocol 100BASE-TX
	RS-232C			Up to 115,200 bps
	Analog Output Terminal Block	Analog Voltage Output (OUTV)		-10 V to +10 V, Output impedance: 100 Ω
		Analog Voltage Output (OUTV)		-10 V to +10 V, Output impedance: 100 Ω
		Analog Current Output (OUTA)		4 mA to 20 mA, Maximum load resistance: 300 Ω
		Analog Current Output (OUTA)		4 mA to 20 mA, Maximum load resistance: 300 Ω
	32-Pin Expansion Connector	Judgment Output (HIGH/PASS/LOW)		Transistor output type Output voltage: DC 21.6–30 V Load current: 50 mA or less ON-State Residual Voltage: 2 V or less OFF-State Leakage Current: 0.1 mA or less
		Judgment Output (HIGH/PASS/LOW)
		Busy Output (BUSY)
		Alarm Output (ALARM)
		Alarm Output (ALARM)
		Enable Output (ENABLE)
		Enable Output (ENABLE)
		Sync Flag Output (SYNFLG)
		Sync Flag Output (SYNFLG)
		Trigger Busy Output (TRIGBUSY)
		Trigger Busy Output (TRIGBUSY)
		Logging State Output (LOGSTAT)
		Logging State Output (LOGSTAT)
		Logging Error Output (LOGERR)
		Logging Error Output (LOGERR)
		Stability output (STABILITY)
		Stability output (STABILITY)
		Task state output (TASKSTAT)
		Task state output (TASKSTAT)
		LIGHT off input (LIGHT OFF)		DC input method Input voltage: 24 V DC ±10% (DC 21.6–26.4 V) Input current: 7 mA Typ. (24 V DC) ON voltage/ON current: 19 V/3 mA or more OFF voltage/OFF current: 5 V/1 mA or less
		LIGHT off input (LIGHT OFF)
		Zero reset input (ZERO)
		Zero reset input (ZERO)
		Timing input (TIMING)
		Timing input (TIMING)
		Reset input (RESET)
		Reset input (RESET)
		Sync Input (SYNC)
		Trigger Input (TRIG)
		Logging Input (LOGGING)
		Logging Input (LOGGING)
		Bank	Selected Bank Output (BANK_ OUT 1–3)	Transistor output type Output voltage: DC 21.6–30 V Load current: 50 mA or less ON-State Residual Voltage: 2 V or less OFF-State Leakage Current: 0.1 mA or less




			Bank Selection Input (BANK_ SEL 1–3)	DC input method Input voltage: 24 V DC ±10% (DC 21.6–26.4 V) Input current: 7 mA Typ. (24 V DC) ON voltage/ON current: 19 V/3 mA or more OFF voltage/OFF current: 5 V/1 mA or less

Item		Specifications
Item		Model ZW-8000□	Model ZW-7000□	Model ZW-5000□
Main Functions	Exposure Time	Auto/Fixed
	Measurement Cycle *1	60µs–7,500µs	20µs–400µs	80µs–1,600µs
	Material Specification	Standard/Mirror/Rough
	Measurement Items	Height/Thickness/Calculation
	Filter Processing	Median/Average/Differentiation/High-pass/Low-pass/Band-pass
	Output	Scaling / Various Hold Functions / Zero Reset / Measurement Value Logging / Keep & Clamp
	Display	Measurement Value / Threshold / Analog Output Voltage or Current Value / Judgment Result / Resolution Light Emission Amount / Internal Logging Status / Peak Received Light Amount
	Number of Setting Registrations	Standard Mode: Up to 8 banks Judgment Value Mode: Up to 32 banks
	Number of Setting Registrations
	Task Processing	Multitasking (up to 4 tasks per bank)
	System	Save/Initialize/Display Measurement Information/Communication Settings/Sensor Head Calibration/Key Lock/Zero Reset Memory/Timing Input
Rated conditions	Power Supply Voltage	21.6 to 26.4 V DC (Including Ripple)
	Current Consumption	700 mA or less	800 mA or less
	Insulation Resistance	Between all lead wires and FG terminal: 20 MΩ (by 250 V insulation resistance tester)
	Withstand Voltage	Between all lead wires and FG terminal: 500 V AC, 50/60 Hz, 1 min.
Environmental Protection	Protective Structure	IP20 (IEC60529)
	Vibration (durability)	10 to 55 Hz (0.35 mm single amplitude), 50 min in each direction of X, Y, and Z
	Shock (durability)	150 m/s², 3 times in each of 6 directions (up/down, left/right, front/back)
	Ambient Temperature Range	Operating: 0 to 40°C, Storage: -15 to +60°C (no freezing or condensation)
	Ambient Temperature Range
	Ambient Humidity Range	During operation/storage: 35 to 85% RH (no condensation)
Ground		Type D grounding (grounding resistance 100Ω or less) *Formerly known as Type 3 grounding
Material		Case: PC
Mass		Approximately 950 g (main body only), approximately 150 g (parallel cable)	Approximately 900 g (main body only), approximately 150 g (parallel cable)
Mass
Accessory		Parallel Cable: 1 piece (Model ZW-XCP2E), Fiber Cleaner: 10 pieces (Model ZW-XCL), Instruction Manual, Membership Registration Sheet, Precautions for Use		Parallel Cable: 1 piece (Model ZW-XCP2E), Fiber Cleaner: 10 Fiber Cleaners (Model ZW-XCL), Fiber Adapter Cap: 1 piece, Strap: 1 piece, Instruction Manual, Membership Registration Sheet, Precautions for Use

Note: Sensor controllers compliant with the Export Trade Control Order (Models ZW-8000T/7000T/5000T) are available.
When using this sensor controller, the minimum resolution will be 0.25 µm regardless of the connected sensor head or configuration settings.
*1. When an extension fiber cable of 2 m or longer is connected to the ZW-8000 Series, 10 m or longer to the ZW-7000 Series, or 5 m or longer to the ZW-5000 Series, the setting range for the measurement cycle (exposure time)
will change. For details, please refer to "Setting the Measurement Cycle" in the ZW-8000/7000/5000 User's Manual (SCEA-702).

Sensor Head

ZW-S8010/S8020/S8030/SP8007/SP8010/SPR8007/SPR8010

Item	Model
Item	Model ZW-S8010	Model ZW-S8020	Model ZW-S8030	Model ZW-SP8007	Model ZW-SP8010	Model ZW-SPR8007	Model ZW-SPR8010
Applicable Sensor Controller	Model ZW-8000□
Sensor Head Type	Rectangular Straight Type			Pen-type Straight Type		Pen-type Right Angle Type
Measurement Center Distance *1	10 mm	20 mm	30 mm	7 mm	10 mm	7 mm	10 mm
Measurement Range *2	±0.5 mm	±1 mm	±2 mm	±0.3 mm	±0.7 mm	±0.3 mm	±0.7 mm
Static Resolution *3	0.002µm	0.004µm	0.008µm	0.002µm	0.003µm	0.003µm	0.005 µm
Linearity *4	±0.3 µm	±0.6 µm	±1.3 µm	±0.3 µm	±0.45 µm	±0.45 µm	±0.7 µm
Spot diameter (Entire measurement range) *5	⌀4 µm	⌀7 µm	⌀10 µm	⌀7 µm	⌀10 µm	⌀8µm	⌀11µm
Spot diameter (Entire measurement range) *5	⌀4 µm	⌀7 µm	⌀10 µm	⌀7 µm	⌀10 µm	⌀8µm	⌀11µm
Measurement cycle *6	60µs–7,500µs
Operating Ambient Luminosity	Object surface illuminance 30,000 lx or less: incandescent lamp
Ambient Temperature Range	Operating: 0 to 50°C, Storage: -15 to +60°C (No freezing or condensation)
Ambient Humidity Range	Operating/Storage: 35 to 85% RH (no condensation)
Protective Structure	IP40 (IEC60529)
Vibration (durability)	10–150 Hz (single amplitude 0.35 mm), 80 minutes in each of the X/Y/Z directions
Shock (durability)	150 m/s², 6 directions, 3 times each (up/down, left/right, front/back)
Temperature characteristics *7	0.6 µm/°C (0.2 µm/°C)	1.1 µm/°C (0.5 µm/°C)	1.8 µm/°C (1.0 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)
Temperature characteristics *7	0.6 µm/°C (0.2 µm/°C)	1.1 µm/°C (0.5 µm/°C)	1.8 µm/°C (1.0 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)
LED Safety	Risk Group 3 (IEC62471)
Material	Chassis: Die-cast aluminum Fiber cable sheath: PVC Calibration ROM: PC			Chassis: SUS Fiber cable sheath: PVC Calibration ROM: PC Mounting Plate: Aluminum		Chassis: SUS, aluminum Fiber cable sheath: PVC Calibration ROM: PC Mounting Plate: Aluminum



Fiber cable length	0.3 m, 2 m (flexible cable)
Fiber cable minimum bending radius	20 mm
Fiber cable minimum bending radius	20 mm
Insulation Resistance (Calibration ROM)	Between case and all terminals: 20 MΩ (by 250 V insulation resistance tester)
Insulation Resistance (Calibration ROM)
Withstand Voltage (Calibration ROM)	Between case and all terminals: 1000 V AC, 50/60 Hz, 1 min.
Withstand Voltage (Calibration ROM)	Between case and all terminals: 1000 V AC, 50/60 Hz, 1 min.
Mass	Fiber cable length 0.3 m: Approximately 170 g Fiber cable length 2 m: Approximately 180 g			Fiber cable length 0.3 m: Approximately 27 g Fiber cable length 2 m: Approximately 37 g		Fiber cable length 0.3 m: approx. 31 g Fiber cable length 2 m: approx. 41 g
Mass
Accessory	Calibration ROM fixing screw (M2 × 5 mm): 1 piece, fiber protection cap: 1 piece, strap: 1 piece, instruction manual, safety precautions			Mounting plate: 1 piece, main unit fixing screws (M2 × 10 mm): 4 pieces, calibration ROM fixing screw (M2 × 5 mm): 1 piece, fiber protection cap: 1 piece, strap: 1 piece, instruction manual, safety precautions

*1. Indicates the distance from the front of the sensor head. For the pen-type right angle model, there may be an individual variation of up to ±0.15 mm in the distance from the front of the sensor head.
*2. The measurement range applies when the measurement cycle is 100 µs or longer.
*3. Actual value when measuring Omron's standard mirror target at the center measurement distance with an average of 16,384 times.
When connected to an export control trade regulation compliant sensor controller (Model ZW-8000T), the minimum resolution is 0.25 µm regardless of the sensor head or setting conditions.
*4. Error relative to the ideal straight line when measuring Omron's standard mirror target with material setting: mirror
*5. Actual value defined as 1/e² (13.5%) of the peak light intensity at the measurement wavelength
*6. When a fiber extension cable of 2 m or longer is connected, the setting range for the measurement period (exposure time) will change.
For details, please refer to "Setting the Measurement Cycle" in the ZW-8000/7000/5000 User's Manual (SCEA-702).
*7. Actual value of the amount of change in the measured value at the measurement center distance when the space between the sensor head and the target is fixed with an aluminum jig, and the sensor head and sensor controller are installed in the same temperature environment.
Values in parentheses are actual values when using an SUS304 jig.
For thickness measurements, the value is calculated from the difference in height between the front and back surfaces, so it is not affected by temperature changes.

Model ZW-S7010/S7020/S7030/S7040/SP7007/SP7010/SPR7007/SPR7010

Item	Model
Item	Model ZW-S7010	Model ZW-S7020	Model ZW-S7030	Model ZW-S7040	Model ZW-SP7007	Model ZW-SP7010	Model ZW-SPR7007	Model ZW-SPR7010
Applicable Sensor Controller	Model ZW-7000□
Sensor Head Type	Rectangular Straight Type				Pen-type Straight Type		Pen-type Right Angle Type
Measurement Center Distance *1	10 mm	20 mm	30 mm	40 mm	7 mm	10 mm	7 mm	10 mm
Measurement Range *2	±0.5 mm	±1 mm	±2 mm	±3 mm	±0.3 mm	±0.7 mm	±0.3 mm	±0.7 mm
Static Resolution *3	0.004µm	0.008µm	0.016µm	0.024µm	0.004µm	0.006µm	0.006µm	0.009 µm
Linearity *4	±0.45 µm	±0.9 µm	±2.0 µm	±3.0 µm	±0.45 µm	±0.7 µm	±0.7 µm	±1.1 µm
Spot diameter (Entire measurement range) *5	⌀50 µm	⌀70 µm	⌀100 µm	⌀120 µm	⌀130 µm	⌀170 µm	⌀150 µm	⌀190 µm
Spot diameter (Entire measurement range) *5	⌀50 µm	⌀70 µm	⌀100 µm	⌀120 µm	⌀130 µm	⌀170 µm	⌀150 µm	⌀190 µm
Measurement cycle *6	20µs–400µs
Operating Ambient Luminosity	Object surface illuminance 30,000 lx or less: incandescent lamp
Ambient Temperature Range	Operating: 0 to 50°C, Storage: -15 to +60°C (No freezing or condensation)
Ambient Humidity Range	Operating/Storage: 35 to 85% RH (no condensation)
Protective Structure	IP40 (IEC60529)
Vibration (durability)	10–150 Hz (single amplitude 0.35 mm), 80 minutes in each of the X/Y/Z directions
Shock (durability)	150 m/s², 6 directions, 3 times each (up/down, left/right, front/back)
Temperature characteristics *7	0.6 µm/°C (0.2 µm/°C)	1.1 µm/°C (0.5 µm/°C)	1.8 µm/°C (1.0 µm/°C)	2.1µm/°C (1.2µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)
Temperature characteristics *7	0.6 µm/°C (0.2 µm/°C)	1.1 µm/°C (0.5 µm/°C)	1.8 µm/°C (1.0 µm/°C)	2.1µm/°C (1.2µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)
LED Safety	Risk Group 3 (IEC62471)
Material	Chassis: Die-cast aluminum Fiber cable sheath: PVC Calibration ROM: PC				Chassis: SUS Fiber cable sheath: PVC Calibration ROM: PC Mounting Plate: Aluminum		Chassis: SUS, aluminum Fiber cable sheath: PVC Calibration ROM: PC Mounting Plate: Aluminum



Fiber cable length	0.3 m, 2 m (flexible cable)
Fiber Cable Minimum Bending Radius	20 mm
Fiber Cable Minimum Bending Radius	20 mm
Insulation Resistance (Calibration ROM)	Between case and all terminals: 20 MΩ (by 250 V insulation resistance tester)
Insulation Resistance (Calibration ROM)
Withstand Voltage (Calibration ROM)	Between case and all terminals: 1000 V AC, 50/60 Hz, 1 min.
Withstand Voltage (Calibration ROM)	Between case and all terminals: 1000 V AC, 50/60 Hz, 1 min.
Mass	Fiber cable length 0.3 m: Approximately 170 g Fiber cable length 2 m: Approximately 180 g				Fiber cable length 0.3 m: Approximately 27 g Fiber cable length 2 m: Approximately 37 g		Fiber cable length 0.3 m: approx. 31 g Fiber cable length 2 m: approx. 41 g
Mass
Accessory	Calibration ROM fixing screw (M2 × 5 mm): 1 piece, Fiber protection cap: 1 piece, Strap: 2 pieces, Instruction manual, Safety precautions				Mounting plate: 1 piece, Main unit fixing screws (M2 × 10 mm): 4 pieces, Calibration ROM fixing screw (M2 × 5 mm): 1 piece, Fiber protection cap: 1 piece, Strap: 2 pieces, Instruction manual, Safety precautions

*1. Indicates the distance from the front of the sensor head. For the pen-type right angle model, there may be individual differences of up to ±0.15 mm in the distance from the front of the sensor head.
*2. Measurement range applies when the measurement cycle is 28 µs or longer.
*3. Actual value when measuring Omron's standard mirror target at the measurement center distance with an average of 16,384 times.
When connected to an Export Trade Control Order-compliant sensor controller (Model ZW-7000T), the minimum resolution will be 0.25 µm regardless of the sensor head or configuration settings.
*4. Error relative to the ideal straight line when measuring Omron's standard mirror target with material setting: mirror
*5. Actual value defined as 1/e² (13.5%) of the peak light intensity at the measurement wavelength
*6. When a fiber extension cable of 10 m or longer is connected, the setting range for the measurement period (exposure time) will change. For details, please refer to "Setting the Measurement Cycle" in the ZW-8000/7000/5000 User's Manual (SCEA-702).

*7. Actual value of the change in measurement at the center distance when the sensor head and the target are fixed with an aluminum jig and both the sensor head and sensor controller are placed in the same temperature environment.
Values in parentheses are actual values when using an SUS304 jig.
For thickness measurements, the value is calculated from the difference in height between the front and back surfaces, so it is not affected by temperature changes.

Model ZW-S5010/S5020/S5030/SP5007/SP5010/SPR5007/SPR5010

Item	Model
Item	Model ZW-S5010	Model ZW-S5020	Model ZW-S5030	Model ZW-SP5007	Model ZW-SP5010	Model ZW-SPR5007	Model ZW-SPR5010
Applicable Sensor Controller	Model ZW-5000□
Sensor Head Type	Rectangular Straight Type			Pen-type Straight Type		Pen-type Right Angle Type
Measurement center distance*1	10 mm	20 mm	30 mm	7 mm	10 mm	7 mm	10 mm
Measurement range	±0.5 mm	±1 mm	±2 mm	±0.3 mm	±0.7 mm	±0.3 mm	±0.7 mm
Static Resolution *2	0.004µm	0.008µm	0.016µm	0.004µm	0.006µm	0.006µm	0.009 µm
Linearity *3	±0.45 µm	±0.9 µm	±2.0 µm	±0.45 µm	±0.7 µm	±0.7 µm	±1.1 µm
Spot diameter (Entire measurement range) *4	Approx. 9 µm (round)	Approx. 13 µm (round)	Approx. 18 µm (round)	Approx. 13 µm (round)	Approx. 18 µm (round)	⌀15 µm	⌀20 µm
Spot diameter (Entire measurement range) *4	Approx. 9 µm (round)	Approx. 13 µm (round)	Approx. 18 µm (round)	Approx. 13 µm (round)	Approx. 18 µm (round)	⌀15 µm	⌀20 µm
Measurement cycle *5	80µs–1,600µs
Operating Ambient Luminosity	Object surface illuminance 30,000 lx or less: incandescent lamp
Ambient Temperature Range	Operating: 0 to 50°C, Storage: -15 to +60°C (No freezing or condensation)
Ambient Humidity Range	Operating/Storage: 35 to 85% RH (no condensation)
Protective Structure	IP40 (IEC60529)
Vibration (durability)	10–150 Hz (single amplitude 0.35 mm), 80 minutes in each of the X/Y/Z directions
Shock (durability)	150 m/s², 6 directions, 3 times each (up/down, left/right, front/back)
Temperature Characteristics *6	0.6 µm/°C (0.2 µm/°C)	1.1 µm/°C (0.5 µm/°C)	1.8 µm/°C (1.0 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)
Temperature Characteristics *6	0.6 µm/°C (0.2 µm/°C)	1.1 µm/°C (0.5 µm/°C)	1.8 µm/°C (1.0 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)	0.8 µm/°C (0.4 µm/°C)
LED Safety	Risk Group 3 (IEC62471)
Material	Chassis: Die-cast aluminum Fiber cable sheath: PVC Calibration ROM: PC			Chassis: SUS Fiber cable sheath: PVC Calibration ROM: PC Mounting Plate: Aluminum		Chassis: SUS, aluminum Fiber cable sheath: PVC Calibration ROM: PC Mounting Plate: Aluminum



Fiber cable length	0.3 m, 2 m (flexible cable)
Fiber Cable Minimum Bending Radius	20 mm
Fiber Cable Minimum Bending Radius	20 mm
Insulation Resistance (Calibration ROM)	Between case and all terminals: 20 MΩ (by 250 V insulation resistance tester)
Insulation Resistance (Calibration ROM)
Withstand Voltage (Calibration ROM)	Between case and all terminals: 1000 V AC, 50/60 Hz, 1 min.
Withstand Voltage (Calibration ROM)	Between case and all terminals: 1000 V AC, 50/60 Hz, 1 min.
Mass	Fiber cable length 0.3 m: Approximately 170 g Fiber cable length 2 m: Approximately 180 g			Fiber cable length 0.3 m: approx. 29 g Fiber cable length 2 m: approx. 39 g		Fiber cable length 0.3 m: approx. 33 g Fiber cable length 2 m: approx. 43 g
Mass
Accessory	Calibration ROM fixing screw (M2 × 5 mm): 1 piece, Fiber protection cap: 1 piece, Strap: 1 piece, Instruction manual, Safety precautions			Mounting plate: 1 piece, Main unit fixing screws (M2 × 10 mm): 4 pieces, Calibration ROM fixing screw (M2 × 5 mm): 1 piece, Fiber protection cap: 1 piece, Strap: 1 piece, Instruction manual, Safety precautions

*1. Indicates the distance from the front of the sensor head. For the pen-type right angle model, there may be an individual variation of up to ±0.15 mm in the distance from the front of the sensor head.
*2. Actual value when Omron's standard mirror target is measured at the measurement center distance with an average of 16,384 measurements.
When connected to an export control compliant sensor controller (Model ZW-5000T), the minimum resolution is 0.25 µm regardless of the sensor head or setting conditions.
*3. Error relative to the ideal straight line when measuring Omron's standard mirror-finish target with material setting: mirror
*4. Actual value defined at 1/e² (13.5%) of the peak light intensity at the measurement wavelength
*5. When a fiber extension cable of 5 m or longer is connected, the setting range for the measurement period (exposure time) will change. For details, please refer to "Setting the Measurement Cycle" in the ZW-8000/7000/5000 User's Manual (SCEA-702).

*6. Actual value of the change in measurement at the center distance when the sensor head and the target are fixed with an aluminum jig and both the sensor head and sensor controller are placed in the same temperature environment.
Values in parentheses are actual values when using an SUS304 jig.
For thickness measurements, the value is calculated from the difference in height between the front and back surfaces, so it is not affected by temperature changes.

: 30; 45; 60

Part Number
ZW-S7020 2M
ZW-S7030 2M
ZW-S7040 2M

Standard Unit Price	Minimum order quantity	Days to Ship	Resolution (μm)	Spot diameter (µm)
MYR 27,505.58	1 Piece(s)	9 Day(s) or more	0.008	⌀70
MYR 27,505.58	1 Piece(s)	9 Day(s) or more	0.016	⌀100
MYR 29,491.95	1 Piece(s)	9 Day(s) or more	0.024	⌀120

Basic Information

Type	Displacement Sensor	Type \| the type of the sensor unit	Sensor Head (Rectangular Straight Type)	Cable Length(m)	2

Configure

3 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Resolution(μm)
0.008

0.016

0.024
Clear
Spot diameter(µm)
- ⌀70
- ⌀100
- ⌀120
Clear
type
- ZW-S7000
Clear

Days to Ship

All

9 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Fiber Coaxial Displacement Sensor [ZW-8000/7000/5000]

Dimensional Drawing

Sensor Head

Product Specifications

Ratings/Performance

Basic Information

Configure

Specification/Dimensions

Resolution(μm)

Spot diameter(µm)

type

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm