(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Electric actuator slider type, ball screw drive, LEFS series, step motor / servo motor (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
[Features]
- Easy main body installation / Reduced installation labor-hours
The main body can be installed without removing exterior parts such as the cover
- Table position detection possible with auto switch
- Up to 4 mounting locations available on both sides of the body
- Ball screw drive
(i)Caution
- Please refer to the catalog for details on specifications and materials.
- The product images are representative only and may differ from the actual product. Please refer to the catalog for details.
- CAD data is not available for some part numbers.
Part Number
Configured Part Number is shown.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Stroke (mm) | Max. Transportable Mass Range (Horizontal) (kg) | Max. Transportable Mass (Horizontal) (kg) | Max. Transportable Mass Range (Vertical) (kg) | Max. Transportable Mass (Vertical) (kg) | Lead (mm) | I/O Module | Max. Thrust Force Range (N) | Table Length L1 (mm) | Positioning Repeatability (µm) | Maximum Velocity (mm/sec) | Table Width W1 (mm) | Brake | Max. Thrust Force (N) | Noise Filter | Size | Accuracy | Motor Type | Motor Mounting Position | Motor Options | Actuator/cable Type | Actuator cable length (m) | Controller/driver Type | I/O Cable Length / Communication Plug (m) | Controller/driver mounting method | Grease Application (Seal Band Section) | Auto Switch Mounting Bracket | Positioning Pin Hole |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | Ethernet | 201 to 300 | 102 | ±20 | 270 | 50 | Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | With lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | NPN | 201 to 300 | 102 | ±20 | 270 | 50 | Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | With lock | Standard cable | 1.5 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | NPN | 201 to 300 | 102 | ±20 | 270 | 50 | Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | With lock | Standard cable | 3 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 700 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | Ethernet | 201 to 300 | 102 | ±20 | 230 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Robot cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 700 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | PROFINET | 201 to 300 | 102 | ±20 | 230 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 700 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | PROFINET | 201 to 300 | 102 | ±20 | 230 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 700 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | Ethernet | 201 to 300 | 102 | ±20 | 230 | 50 | Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | With lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 750 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | Ethernet | 201 to 300 | 102 | ±20 | 180 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 750 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | EtherCAT | 201 to 300 | 102 | ±20 | 180 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Standard cable | 3 | JXCE1 (EtherCAT (R) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 800 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | Ethernet | 201 to 300 | 102 | ±20 | 180 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 800 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | NPN | 201 to 300 | 102 | ±20 | 180 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Standard cable | 1.5 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 800 | 20.1 to 50.0 | 30 | 10.1 to 20.0 | 15 | 6 | NPN | 201 to 300 | 102 | ±20 | 180 | 50 | Not Provided | 294 | Not Provided | 25 | Basic Type | Step motor | In-line | Without lock | Standard cable | 3 | LECP1 (programless type) | 3 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 50 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | DeviceNet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXCD1 (DeviceNet (TM) direct input) | T-branch type | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 1.5 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 3 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Standard cable | 3 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Standard cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Without cable | Not Included | LECP1 (programless type) | 3 | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 1.5 | LECP1 (programless type) | 3 | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | LECP1 (programless type) | 3 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | LECP1 (programless type) | 3 | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Standard cable | 1.5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | EtherCAT | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCE1 (EtherCAT (R) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 1.5 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 200 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Standard cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 250 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 250 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 250 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 250 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 250 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 250 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 15 | JXCP1 (PROFINET direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Without cable | Not Included | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | EtherCAT | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXCE1 (EtherCAT (R) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 1.5 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 5 | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 300 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 350 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 350 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 5 | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 350 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 350 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Standard cable | 1.5 | LECP1 (programless type) | 1.5 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXCP1 (PROFINET direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 5 | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 5 | LECP1 (programless type) | 1.5 | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 400 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Standard cable | 1.5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 450 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 500 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 500 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 500 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 750 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 1.5 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 500 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 500 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 750 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Standard cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 550 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | EtherCAT | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCE1 (EtherCAT (R) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 550 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 550 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 540 | 50 | Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | With lock | Robot cable | 5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 1.5 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 3 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | Ethernet | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXC91 (EtherNet/IP (TM) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | EtherCAT | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 10 | JXCE1 (EtherCAT (R) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | PROFINET | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 10 | JXCP1 (PROFINET direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | DeviceNet | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 3 | JXCD1 (DeviceNet (TM) direct input) | T-branch type | DIN rail mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | DeviceNet | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 5 | JXCD1 (DeviceNet (TM) direct input) | No plug connector | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | DeviceNet | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 5 | JXCD1 (DeviceNet (TM) direct input) | Straight Type | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | Without cable (without communication plug connector) | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 1.5 | LECP1 (programless type) | 1.5 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | NPN | 201 to 300 | 102 | ±20 | 540 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Standard cable | 5 | LECP1 (programless type) | 5 | Screw mounting type | available | Not Included | Housing B bottom surface | ||
| 1 Piece(s) | Quote | 650 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | EtherCAT | 201 to 300 | 102 | ±20 | 420 | 50 | Not Provided | 245 | Not Provided | 25 | Basic Type | Step motor | Left side parallel | Without lock | Robot cable | 5 | JXCE1 (EtherCAT (R) direct input) | No plug connector | DIN rail mounting type | available | Not Included | Housing B bottom surface |
Loading...
Basic Information
| Type | Slider | Drive Method | Rolled Ball Screw | Main Body, Peripheral Components | Main Body |
|---|---|---|---|---|---|
| Guide | Provided | Input Power Supply | DC24V | Position Detection | Incremental |
| Operating Environment | Standard | Operating Temperature Range(°C) | 5::40 |
Specification/Dimensions
-
Stroke(mm)
-
Max. Transportable Mass Range (Horizontal)(kg)
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
- 50.1 to 100.0
-
Max. Transportable Mass (Horizontal)(kg)
-
Max. Transportable Mass Range (Vertical)(kg)
- 0 to 2.0
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
-
Max. Transportable Mass (Vertical)(kg)
-
Lead(mm)
-
I/O Module
- NPN
- PNP
- DeviceNet
- Ethernet
- Not Provided
- EtherCAT
- IO-Link
- PROFINET
-
Table Length L1(mm)
-
Positioning Repeatability(µm)
-
Maximum Velocity(mm/sec)
-
Table Width W1(mm)
-
Brake
- Not Provided
- Provided
-
Max. Thrust Force(N)
-
Noise Filter
- Not Provided
- Provided
-
Size
- 16
- 25
- 32
- 40
-
Accuracy
- Basic Type
- High Precision Type
-
Motor Type
- Servo motor
- Step motor
-
Motor Mounting Position
- In-line
- Left side parallel
- Right side parallel
-
Motor Options
- With lock
- Without lock
-
Actuator/cable Type
-
Actuator cable length(m)
- 1.5
- 3
- 5
- 8
- 10
- 15
- 20
- Not Included
-
Controller/driver Type
- JXCD1 (DeviceNet (TM) direct input)
- JXCE1 (EtherCAT (R) direct input)
- JXCL1 (IO-Link direct input)
- JXCP1 (PROFINET direct input)
- LECP1 (programless type)
- LECA6 (step data input type)
- JXC91 (EtherNet/IP (TM) direct input)
- LECPA (pulse input type)
- No controller/driver
-
I/O Cable Length / Communication Plug(m)
-
Controller/driver mounting method
- DIN rail mounting type
- Screw mounting type
-
Grease Application (Seal Band Section)
- None (roller specifications)
- available
-
Auto Switch Mounting Bracket
- 1 piece (Included)
- Not Included
-
Positioning Pin Hole
- Housing B bottom surface
- Two locations on the body bottom surface
-
type
- LEFS
-
Max. Thrust Force Range(N)
- 0 to 100
- 101 to 200
- 201 to 300
- 301 to 500
- 501 to 1000
-
CAD
- 2D
- 3D
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Single Axis Robots RS1 - Straight
- Single Axis Robots RS2 - Straight
- Single Axis Robot Maintenance Products - Power Connectors
- Single Axis Robots E-MCB14 Precision Belt Drive, Fully-Sealed Type(For Clean Environment)
- Single Axis Robots E-MTHE17 / E-MTH17 Screw Drive, Semi-Sealed Type(General Use)
- Electric actuator, slider type, belt drive, motorless specification, LEFB series
- Electric actuator miniature rod type LEPY series step motor (servo 24 V DC)
- Mini Slide, EGSC Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy