Carryable Air Supply Unit (Part Numbers)

Drawing

Product Specification

Product Specification

Items	ASU-S-C6-1
Rated pressure	0.4 MPa
Maximum Allowable Working Pressure	0.5 MPa
Discharge Airflow (50/60 Hz)	19/25 L/min (ANR)*1
Rated Voltage	Single-phase 100 V AC (50/60 Hz)
Rated current (50/60 Hz)	3.3/3.5 A
Noise level	60 dB (A) with cover closed
Pump motor	4P, Class E, capacitor induction Automatic return-type thermal protector
Pump motor output	90W
Ambient temperature	5 to 35°C
Weight	15 kg
External dimensions	Width 350 × depth 225 × height 560 mm
Pump startup system	Pressure Switch type
Pump Warranty Period	1 year or 3,000 hours*2

*1: Flow rate under open air conditions
*2: When ambient temperature is 5–35°C, rated pressure is 0.4 MPa, and during continuous operation

Circuit Diagram

Main Parts List

No.	Part name
1	Case
2	Pressure sensor
3	Intake filter
4	Breaker
5	Quick valve
6	Silencer
7	Filter/Regulator
8	Air filter

Product Feature Details

Easy to Carry
Designed in a carry case shape, making it easy for anyone to transport.

Supplies Clean Air
The pump heats the compressed air, which is then cooled by an aftercooler.
Supplies clean air by centrifugally separating generated condensate and removing contaminants.

Continuous use possible
Enhanced heat dissipation around the pump helps suppress temperature rise during extended operation.

Cautions and Prohibitions

Usage Precautions

Warning

■ When designing/selecting

• Use for purposes other than the production of compressed air is prohibited.
• Do not use for medical devices. Doing so may result in personal injury or other accidents.

■ During installation

• Use with a power supply voltage within the specified range.
• Connect the earth. There is a risk of electric shock or serious injury to the human body.

Caution

■ When designing/selecting

• Do not use this product installed on transportation equipment such as vehicles or ships.
  Vibration and similar factors could result in internal equipment damage.
• If sudden load fluctuations are expected, pay attention to the discharge flow rate and tank capacity.
• Do not use if the installation environment or inlet air contains corrosive gas, chemicals, organic solvent, or combustible gas.
• Condensation may occur depending on the operating environment, and water droplets may flow out to the outlet.
  If dry air is required, install a dryer at the outlet.

■ During installation

• Do not use in locations where the operating temperature range of the product is exceeded.
• Install in a well-ventilated location free from rain, water, and dust.
• Do not use in areas with high humidity or where condensation may occur.
• Install indoors and avoid locations exposed to direct sunlight or where heat is generated.
• Install on a horizontal floor surface which is not subject to vibration.
• Ensure good ventilation and secure a space of at least 150 mm on all four sides for easy maintenance and inspection.

■ During Use and Maintenance

• Clean the filter regularly. If the filter element becomes clogged, pressure loss will increase.
• If vibration or noise increases, check the housing frame and the mounting sections of each component and device. If there is any looseness in screws or bolts, retighten them.
• When cleaning this product, do not use substances that contain volatile organic solvents such as benzine or paint thinner.
• Condensate will accumulate in the filter case. During continuous operation, use one hour as a reference to check and drain the condensate.

■ Others

• Please make sure to thoroughly read the attached instruction manual before use.
• This product is not designed for change management.
• As this product is precision equipment, do not subject it to strong vibration, impact, or excessive force. There is a risk of damage.
•  Do not lift the case by the expansion and contraction handle for transport when on stairs or similar locations. There is a risk of damage.

When exporting this product or related technologies, please ensure that they are not used for weapon or armament-related uses.