Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Fiber illumination optical fiber light guide direct connection type FTR series

Optical fiber light guide direct connection type, continuous lighting type LED light source.
[Features]
· Energy saving.
·The light guide has a base of ⌀15 (15 mm in diameter), and the focal point is at a depth of 20 mm.
·A long-life LED light source with a design life of 30,000 hours is used.
·Efficient light transmission with a newly developed high-concentration lens.
[Applications]
·Ideal for replacing halogen light sources and metal halide light sources.
·When you want to use the existing fiber optical system as it is.

Part Number

Configured Part Number is shown.

FTR-AW15

Product Specifications
Part Numbers
Catalog

Specifications of Fiber Illumination Fiber Optic Light Guide Direct Connection Type FTR Series

External appearance of Fiber Illumination Fiber Optic Light Guide Direct Connection Type FTR Series

Dimensional drawing of Fiber Illumination Fiber Optic Light Guide Direct Connection Type FTR Series

Illuminance comparison with halogen light source

Stable high luminance
The combination of a long lifespan LED light source and a newly developed high-condensing lens enables stable high luminance emission immediately after turning on.
Supports various dimming control methods
In addition to manual dimming from 0 to 100% using an analog volume, dimming can also be adjusted via external control signals (analog voltage/digital signal).
Supports environments where quietness is essential
The LED light-emitting unit features an integrated heatsink shape that allows for easy replacement with just one driver. Fanless air-cooled type suitable for environments where quietness is essential. ^*

*FTR-A15 series, FTR-D15 series

External analog voltage signal dimming

FTR-A□15

15-watt type / Supports external analog voltage signal dimming
Illuminance: 450,000 lx
Light output: Equivalent to 100W halogen
Fanless natural air cooling system
High quietness and no vibration

FTR-A□20

20-watt type / supports dimming with external analog voltage signal
Illuminance: 600,000 lx
Light output: Equivalent to 150W halogen
Also suitable for line sensor cameras

Lighting ON/OFF control by external signal: Synchronized lighting via transistor open collector connection. The light turns off when pins 1 and 2 of the D-sub connector for external control are short-circuited, and turns on when open.

ON/OFF lighting control by external signal
Synchronized lighting via transistor open collector connection. For external control, short-circuiting pins 1 and 2 of the D-sub connector turns the light off, and opening them turns it on.

*Delay time until emission: There is a slight delay from when the control signal is input to when emission begins. (Approximately 650 μsec) It also takes about 25 μsec to reach the peak level. The delay time is always constant.

Dimming control by external signal: Dimming can be adjusted (0–100%) using an external analog voltage signal (DC 0–5 V).

Dimming adjustable by external signal
Dimming adjustable by external analog voltage signal (DC 0–5 V) (within the range of 0–100%)

External Digital Signal Dimming

FTR-D□15

15-watt model / Compatible with external digital signal dimming
Illuminance: 450,000 lx
Light output: Equivalent to 100W halogen
Fanless natural air cooling system
High quietness and no vibration

ON/OFF lighting control by external signal: Synchronized lighting using a photocoupler. Turns off when the photocoupler is ON, and turns on when it is OFF. Uses pins 9 and 10 of the D-sub connector for external control.

Lighting ON/OFF control by external signal emission
Synchronized emission by photo coupler. Turns off when the photo coupler is ON, and turns on when it is OFF. Uses pins 9 and 10 of the D-sub connector for external control.

*Delay time until emission: There is a slight delay from when the control signal is input to when emission begins. (Approximately 650 μsec) It also takes about 25 μsec to reach the peak level. The delay time is always constant.

Dimming control by external signal: Dimming adjustable by external digital signal (256 levels between 0–100%). When all input signals are H (1), the light output is at maximum (100%); when all are L (0), the light is off.

Dimming adjustable by external signal
Dimming adjustable by external digital signal (256 gradations between 0–100%). When all input signals are H (1), the light output is at maximum (100%), and when L (0), the light is off.

Emission wavelength, spectral distribution

Type		FTR-AW15	FTR-AUV15-365	FTR-AIR15	FTR-AW20	FTR-DW15	FTR-DUV15-365	FTR-DIR15
Emission Color		White	Ultraviolet	Infrared light	White	White	Ultraviolet	Infrared light
Color Temperature / Peak Wavelength		5,600K^*1	365 nm	860 nm	5,600K^*1	5,600K^*1	365 nm	860 nm
Rated input voltage		100 to 240 V AC ±10%, 50/60 Hz
Power consumption		20W			26W	20W
Lighting Method		Constant current control
Light Control		Lighting ON/OFF control by external signal is possible.
Dimming	Manual	Continuous dimming by front dimming volume (0–100%)
Dimming	External control	Analog voltage signal input (0 V DC to 5 V)				8-bit digital dimming (256 levels)
Cooling method		Natural heat dissipation			Natural heat dissipation + cooling fan	Natural heat dissipation
Environmental Conditions		Ambient temperature: 0 to +40°C
Environmental Conditions		Ambient humidity: 20% to 80% RH (no condensation)
Average illuminance (lx)^*2		450,000	-	-	600,000	450,000	-	-
LED lifespan (half-value) / hours^*3		Approx. 30,000	Approx. 5,000	Approx. 30,000	Approx. 30,000	Approx. 30,000	Approx. 5,000	Approx. 30,000
External dimensions		W78 x H144 x D200 mm (excluding protruding section)
Weight		2.0 kg (main body only)

*1 The color temperature is a reference value.
*2 Illuminance is a reference value for the initial illuminance measured 15 mm from the light guide LGC1-5L500 end face after attachment.
*3 Lifespan depends on the operating environment temperature. Not a guaranteed value.

: 30; 45; 60

Part Number
FTR-AW15

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship
	MYR 5,808.67	1 Piece(s)		28 Day(s) or more

Basic Information

Type	Light Source	Light Source Type	LED	Input power supply voltage(V)	AC100～240±10%
Power Consumption	20W	Light Control Method	External control (analog voltage signal), analog volume	Luminescence Color	White

Please check the type/dimensions/specifications of the part FTR-AW15 in the Fiber illumination optical fiber light guide direct connection type FTR series series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- FTR
Clear

Days to Ship

All

28 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

TPX Techno Bottle
AS ONE

Standard Price : MYR 32.62

Days to Ship : 8 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Fiber illumination optical fiber light guide direct connection type FTR series

Specifications of Fiber Illumination Fiber Optic Light Guide Direct Connection Type FTR Series

External analog voltage signal dimming

External Digital Signal Dimming

Basic Information

Configure

Specification/Dimensions

type

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm