(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Silicone rubber heater (SR type) (SR100-60-75-100)
- Volume Discount
A thin, heater plate with a thickness of 1.5 mm, made from a flexible silicone rubber material. Support is available for a wide range of orders including perforated, curved, or removable types. Product available in any quantity.
Part Number
Configured Part Number is shown.
SR100-60-75-100
- Download
Product Details - CAD Data unavailable
Drawing
* If you wish to use double-sided tape, select the "SR100-P" type.
Product Specification
| Heat resistant temperature | Continuous | 200°C |
|---|---|---|
| Maximum operating temperature | 230°C | |
| Electrical characteristics | Capacity tolerance | +/- 10% |
| Withstand voltage | 1,500 V AC for 1 minute | |
| Insulation resistance value | 100 MΩ or more/500 V DC | |
| Dimensions | Maximum | 450 x 3,000 mm or 500 x 700 mm |
| Minimum | 25 x 30 mm | |
| Standard thickness^* | 1.5 mm |
* The thickness of the power supply input part is about 4 to 6 mm.
100 V AC with 300 mm lead wire / Power density 0.8 W/cm²
RoHS compliant product
Specifications Table
| Part number | Wattage (W) | Size (A x B) (mm x mm) |
|---|---|---|
| SR100-10-25-50 (-P) | 10 | 25 x 50 |
| SR100-20-25-100 (-P) | 20 | 25 x 100 |
| SR100-25-25-125 (-P) | 25 | 25 x 125 |
| SR100-30-25-150 (-P) | 30 | 25 x 150 |
| SR100-40-25-200 (-P) | 40 | 25 x 200 |
| SR100-50-25-250 (-P) | 50 | 25 x 250 |
| SR100-60-25-300 (-P) | 60 | 25 x 300 |
| SR100-20-50-50 (-P) | 20 | 50 x 50 |
| SR100-40-50-100 (-P) | 40 | 50 x 100 |
| SR100-50-50-125 (-P) | 50 | 50 x 125 |
| SR100-60-50-150 (-P) | 60 | 50 x 150 |
| SR100-80-50-200 (-P) | 80 | 50 x 200 |
| SR100-100-50-250 (-P) | 100 | 50 x 250 |
| SR100-120-50-300 (-P) | 120 | 50 x 300 |
| SR100-60-75-100 (-P) | 60 | 75 x 100 |
| SR100-75-75-125 (-P) | 75 | 75 x 125 |
| SR100-90-75-150 (-P) | 90 | 75 x 150 |
| SR100-120-75-200 (-P) | 120 | 75 x 200 |
| SR100-150-75-250 (-P) | 150 | 75 x 250 |
| SR100-180-75-300 (-P) | 180 | 75 x 300 |
| Part number | Wattage (W) | Size (A x B) (mm x mm) |
|---|---|---|
| SR100-80-100-100 (-P) | 80 | 100 x 100 |
| SR100-100-100-125 (-P) | 100 | 100 x 125 |
| SR100-120-100-150 (-P) | 120 | 100 x 150 |
| SR100-160-100-200 (-P) | 160 | 100 x 200 |
| SR100-200-100-250 (-P) | 200 | 100 x 250 |
| SR100-240-100-300 (-P) | 240 | 100 x 300 |
| SR100-125-125-125 (-P) | 125 | 125 x 125 |
| SR100-150-125-150 (-P) | 150 | 125 x 150 |
| SR100-200-125-200 (-P) | 200 | 125 x 200 |
| SR100-250-125-250 (-P) | 250 | 125 x 250 |
| SR100-300-125-300 (-P) | 300 | 125 x 300 |
| SR100-180-150-150 (-P) | 180 | 150 x 150 |
| SR100-240-150-200 (-P) | 240 | 150 x 200 |
| SR100-300-150-250 (-P) | 300 | 150 x 250 |
| SR100-360-150-300 (-P) | 360 | 150 x 300 |
| SR100-320-200-200 (-P) | 320 | 200 x 200 |
| SR100-400-200-250 (-P) | 400 | 200 x 250 |
| SR100-480-200-300 (-P) | 480 | 200 x 300 |
| SR100-500-250-250 (-P) | 500 | 250 x 250 |
| SR100-600-250-300 (-P) | 600 | 250 x 300 |
| SR100-720-300-300 (-P) | 720 | 300 x 300 |
*Length L refers to dimension A, and width W refers to dimension B.
Alteration
Additional options (Semi-order product)
It is possible to extend the lead wire of the silicone rubber heater and add a K type thermocouple.
* The thermocouple is the TH-8181 series with a resin coating.
When adding lead wires
- Add "-L (length)" to the end of the part number.
* The extension is done with a crimp terminal, and then wrapped with glass tape and then covered with a silicone shrinkable tube.
· Example of model with options
(Example) When the lead wire of the silicone rubber heater is extended to 3 m
SR100-20-25-100-L3
(Example) When the lead wire of a silicone rubber heater with double-sided tape is extended to 3 m
SR100-20-25-100-P-L3
When adding a thermocouple K type
- Add "-K (length)" to the end of the part number.
* When adding a thermocouple, the lead wire will be extended at the same time.
· Example of model with options
(Example) When the thermocouple is extended 3 m to the silicone rubber heater
SR100-20-25-100-K3
(Example) When a thermocouple is extended 3 m to a silicone rubber heater with double-sided tape
SR100-20-25-100-P-K3
Features
Basic Structure
(1) Silicone rubber sheet (2) Heating wire (3) Electrode pressing silicone sheet (4) Lead (5) Lead wire
Basic structural drawing. A structure in which a resistance element is placed between 2 upper and lower silicone rubber sheets, and after removing the internal air, it is compressed and pressed to form a thin sheet.
"-P" at the part number suffix is a product with double-sided tape (with release paper) attached to the silicone rubber heater.
Electric Power Density
Although it varies depending on the control temperature, generally 0.8 W/cm² or less is optimal. (Please note that if the power density is too high, it will be difficult to control the temperature.)
Temperature Control
- Analog type
Suitable for rough temperature control
(0 to 100℃ variable knob type, etc.) - Digital type
Suitable for temperature control with higher accuracy
(0 to 999℃ variable button type)
"monoone+·monoone-120·monoone-200"
Technical Information
Surface Temperature in Air
*Measure the heater alone in normal temperature air. The surface temperature of the heater varies depending on the operating environment, the material and shape of the combustible material, etc.
Cautions and Prohibitions
- Do not heat the heater in the open air. There is a risk of fire, etc. The same applies if the heater is floating against the mounting surface.
- When sandwiching the heater between the metal plate and the object to be heated, make sure that the lead wires do not come into contact with the metal plate.
- Cannot be used in atmospheres such as steam, water, or corrosive gases.
- Processing such as making holes in the heater is not possible. Also, if the rubber is damaged, it cannot be used.
- Do not bend the heater when using it. The minimum bending radius of the heater is R25. (The lead wire holding sheet does not bend very much.)
- Do not use the product above the rated voltage (V).
- Be sure to turn off the power when removing the heater from the object to be heated. Also, do not touch the heater immediately after turning off the power.
- If the gap between the object to be heated and the heater is large, the temperature will rise abnormally. Care must be taken when fixing the heater.
- Keep the lead wire retaining sheets free from pressure.
- *Silicone-based products may emit smoke or an odor when heated to high temperatures. This is a phenomenon peculiar to silicone called "impurities" in silicone or "siloxane gas." We thank you for your understanding.
(*Heat treatment at high temperatures eliminates smoke, but does not guarantee 100% elimination of siloxane gas.)
Frequently Asked Questions (FAQ)
The heating wire is sandwiched between silicone sheets with a heat resistance of 200℃ to form a sheet.
Custom order products can be processed into a variety of shapes, such as circles, notches, and cylinders.
| Part Number |
|---|
| SR100-60-75-100 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Length L (Range) (mm) | Rated Capacity (Range) (W) | Output Rating (W) | Length L (mm) | Size (AxB) (mm×mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 340.52 | 1 Piece(s) | Available | 10 Day(s) or more | 10 | ～100 | ～100 | 60 | 75 | 75×100 |
Loading...
Basic Information
| Maximum Operating Temperature(°C) | 230 | Rated Voltage(V) | 100 | Category | Main Body of Heater |
|---|
Please check the type/dimensions/specifications of the part SR100-60-75-100 in the Silicone rubber heater (SR type) series.
Specification/Dimensions
-
type
- SR100
-
Length L (Range)(mm)
-
Rated Capacity (Range)(W)
-
Output Rating(W)
-
Length L(mm)
-
Size (AxB)(mm×mm)
- 25×100
- 25×125
- 25×150
- 25×200
- 25×250
- 25×300
- 50×50
- 50×100
- 50×125
- 50×150
- 50×200
- 50×250
- 50×300
- 75×100
- 75×125
- 75×150
- 75×200
- 75×250
- 75×300
- 100×100
- 100×125
- 100×150
- 100×200
- 100×250
- 100×300
- 125×125
- 125×150
- 125×200
- 125×250
- 125×300
- 150×150
- 150×200
- 150×250
- 150×300
- 200×200
- 200×250
- 200×300
- 250×250
- 250×300
- 300×300
Days to Ship
-
- All
- 4 Day(s) or Less
- 10 Day(s) or Less
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| SR100-120-50-300 |
| SR100-120-75-200 |
| SR100-125-125-125 |
| SR100-600-250-300 |
| SR100-720-300-300 |
| SR100-75-75-125 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Length L (Range) (mm) | Rated Capacity (Range) (W) | Output Rating (W) | Length L (mm) | Size (AxB) (mm×mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 386.86 | 1 Piece(s) | 10 Day(s) or more | 10 | ～100 | 101～200 | 120 | 50 | 50×300 | ||
MYR 386.86 | 1 Piece(s) | 10 Day(s) or more | 10 | ～100 | 101～200 | 120 | 75 | 75×200 | ||
MYR 393.44 | 1 Piece(s) | 10 Day(s) or more | 10 | 101～200 | 101～200 | 125 | 125 | 125×125 | ||
MYR 740.84 | 1 Piece(s) | 13 Day(s) or more | 10 | 201～ | 201～ | 600 | 250 | 250×300 | ||
MYR 855.80 | 1 Piece(s) | 10 Day(s) or more | 10 | 201～ | 201～ | 720 | 300 | 300×300 | ||
MYR 347.11 | 1 Piece(s) | 13 Day(s) or more | 10 | ～100 | ～100 | 75 | 75 | 75×125 |
Additional Products in this Category
- Rubber Heaters Items - Adhesives for Rubber Heater
- Rubber Heaters-Square Type/Standard Selectable
- Rubber Heaters-Round Type/Standard
- Rubber Heaters-Square Type/Flat Type
- Rubber Heaters-Square Type/With Thermostat
- SUMICON 230 Heater
- Watlow Silicone Rubber Heater
- Silicone Rubber Heater
Customers Who Viewed This Item Also Viewed
-
-
-
Watlow Silicone Rubber HeaterSAKAGUCHI
Standard Price : MYR 233.30-
Days to Ship : 4 Day(s) or more
-
Temperature Sensor Thermocouple K Type (Sheath Type)THREE HIGH
Standard Price : MYR 266.08-
Days to Ship : 4 Day(s) or more
-
-
-
Rubber Heaters Items - Adhesives for Rubber HeaterMISUMI
Standard Price : MYR 287.10
Days to Ship : 4 Day(s) or more
-
Temperature Controllers - UniversalMISUMI
Standard Price : MYR 1,759.06-
Days to Ship : 1 Day(s) or more
-
-
Compact type digital temperature regulatorTHREE HIGH
Standard Price : MYR 3,023.87
Days to Ship : 10 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy