(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
MELSERVO-J4 rotating type servo motor HG-MR series (200 V class, small capacity, ultra-low inertia)
The maximum rotation speed is 6,000 r/min against the rated rotation speed of 3,000 r/min.
[Features]
・ High resolution absolute position encoder (4,194,304 pulses/rev (22 bit)) is standard equipment. It achieves higher accuracy positioning.
・ IP67 is adopted as standard. No problem with water and dust
・ The power cable, encoder cable, and electromagnetic brake cable can be pulled out from the servo motor either on the load side or the non-load side by selecting the cable.
・ Torque ripple is greatly reduced by optimizing the combination of motor poles and slots.
・ It operates smoothly even at low speed operation, which is easily affected by torque ripple, and improves stability.
Part Number
Configured Part Number is shown.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Square Flange Size A (mm) | Rated Output (W) | Electromagnetic Brakes | Shaft End Shape | Motor series | Oil Seals |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 2,576.67 | 1 Piece(s) | 79 Day(s) | 40 | 50 | No | Standard (straight) | Ultra-low inertia, small capacity | Not Available | ||
MYR 4,760.00 | 1 Piece(s) | 79 Day(s) | 40 | 50 | Presence | Standard (straight) | Ultra-low inertia/small capacity | NA | ||
MYR 5,371.67 | 1 Piece(s) | 79 Day(s) | 40 | 50 | Presence | D Cut | Ultra-low inertia/small capacity | NA | ||
MYR 3,293.33 | 1 Piece(s) | 79 Day(s) | 40 | 50 | No | D Cut | Ultra-low inertia/small capacity | NA | ||
MYR 3,110.00 | 1 Piece(s) | 79 Day(s) | 40 | 100 | No | Standard (straight) | Ultra-low inertia, small capacity | Not Available | ||
MYR 4,916.67 | 1 Piece(s) | 79 Day(s) | 40 | 100 | Presence | Standard (straight) | Ultra-low inertia/small capacity | NA | ||
MYR 5,668.33 | 1 Piece(s) | 79 Day(s) | 40 | 100 | Presence | D Cut | Ultra-low inertia/small capacity | NA | ||
MYR 5,770.00 | 1 Piece(s) | 97 Day(s) | 40 | 100 | Presence | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 6,566.67 | 1 Piece(s) | 97 Day(s) | 40 | 100 | Presence | D cut | Ultra-low inertia, small capacity | Included | ||
MYR 3,711.67 | 1 Piece(s) | 79 Day(s) | 40 | 100 | No | D Cut | Ultra-low inertia/small capacity | NA | ||
MYR 4,086.67 | 1 Piece(s) | 97 Day(s) | 40 | 100 | No | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 4,696.67 | 1 Piece(s) | 97 Day(s) | 40 | 100 | No | D cut | Ultra-low inertia, small capacity | Included | ||
MYR 3,490.00 | 1 Piece(s) | 97 Day(s) | 40 | 100 | No | Keyway shaft (with key) | Ultra-low inertia, small capacity | None | ||
MYR 3,711.67 | 1 Piece(s) | 79 Day(s) | 60 | 200 | No | Standard (straight) | Ultra-low inertia/small capacity | NA | ||
MYR 6,016.67 | 1 Piece(s) | 79 Day(s) | 60 | 200 | Presence | Standard (straight) | Ultra-low inertia/small capacity | NA | ||
MYR 6,761.67 | 1 Piece(s) | 97 Day(s) | 60 | 200 | Presence | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 6,665.00 | 1 Piece(s) | 79 Day(s) | 60 | 200 | Presence | With Keyway or With Key | Ultra-low inertia/small capacity | NA | ||
MYR 3,371.67 | 1 Piece(s) | 97 Day(s) | 60 | 200 | No | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 5,385.00 | 1 Piece(s) | 97 Day(s) | 60 | 200 | No | Splined shaft (with or without key) | Ultra-low inertia, small capacity | Included | ||
MYR 4,431.67 | 1 Piece(s) | 79 Day(s) | 60 | 200 | No | With Keyway or With Key | Ultra-low inertia/small capacity | NA | ||
MYR 4,431.67 | 1 Piece(s) | 79 Day(s) | 60 | 400 | No | Standard (straight) | Ultra-low inertia, small capacity | Not Available | ||
MYR 6,813.33 | 1 Piece(s) | 79 Day(s) | 60 | 400 | Presence | Standard (straight) | Ultra-low inertia, small capacity | Not Available | ||
MYR 7,636.67 | 1 Piece(s) | 97 Day(s) | 60 | 400 | Presence | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 7,401.67 | 1 Piece(s) | 79 Day(s) | 60 | 400 | Presence | With Keyway or With Key | Ultra-low inertia/small capacity | NA | ||
MYR 3,895.00 | 1 Piece(s) | 97 Day(s) | 60 | 400 | No | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 6,113.33 | 1 Piece(s) | 97 Day(s) | 60 | 400 | No | Splined shaft (with or without key) | Ultra-low inertia, small capacity | Included | ||
MYR 5,280.00 | 1 Piece(s) | 79 Day(s) | 60 | 400 | No | With Keyway or With Key | Ultra-low inertia/small capacity | NA | ||
MYR 5,371.67 | 1 Piece(s) | 79 Day(s) | 80 | 750 | No | Standard (straight) | Ultra-low inertia, small capacity | Not Available | ||
MYR 7,678.33 | 1 Piece(s) | 79 Day(s) | 80 | 750 | Presence | Standard (straight) | Ultra-low inertia, small capacity | Not Available | ||
MYR 10,026.67 | 1 Piece(s) | 97 Day(s) | 80 | 750 | Presence | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 11,080.00 | 1 Piece(s) | 97 Day(s) | 80 | 750 | Presence | Splined shaft (with or without key) | Ultra-low inertia, small capacity | Included | ||
MYR 8,503.33 | 1 Piece(s) | 79 Day(s) | 80 | 750 | Presence | With Keyway or With Key | Ultra-low inertia/small capacity | NA | ||
MYR 5,841.67 | 1 Piece(s) | 97 Day(s) | 80 | 750 | No | Standard (straight) | Ultra-low inertia, small capacity | Included | ||
MYR 6,255.00 | 1 Piece(s) | 79 Day(s) | 80 | 750 | No | With Keyway or With Key | Ultra-low inertia/small capacity | NA |
Loading...
Basic Information
| Type | Motor Unit | Voltage Specifications | 200V Class | Power Supply | Single-phase/ Three-phase |
|---|---|---|---|---|---|
| Resolution(p/rev) | 4194304 | Rated Rotation Speed(r/min) | 3000 | Reducer | None |
Specification/Dimensions
-
Square Flange Size A(mm)
-
Rated Output(W)
-
Electromagnetic Brakes
- No
- Presence
-
Shaft End Shape
- D Cut
- D cut
- Keyway shaft (with key)
- Splined shaft (with or without key)
- Standard (straight)
- With Keyway or With Key
-
Motor series
-
Oil Seals
- Included
- NA
- None
- Not Available
-
type
- HG-MR
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 79 Day(s) or Less
- 97 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- MISUMI AC Servo Motor Accesorries-Battery Kit / Cables
- AC Servo driver G5 series [AC200V input type]
- One-touch servo motor HF-KN series
- AC Servo Driver G5 Series [MECHATROLINK-II Communication Built-in Type]
- Servo Motors AZX SERIES
- Driver Circuit for Servo Motor
- AC-Servo Amplifier MR-JE Series
- Encoder Cable, NEBM Series
Customers Who Viewed This Item Also Viewed
-
MELSERVO-J4 Rotating Type Servo Motor HG-KR Series (200 V Class, Small Capacity, Low Inertia)MITSUBISHI
Standard Price : MYR 2,050.00-
Days to Ship : 4 Day(s) or more
-
MELSERVO-J4 rotating servo motor HG-SR series (medium capacity, medium inertia)MITSUBISHI
Standard Price : MYR 3,608.33-
Days to Ship : 4 Day(s) or more
-
Servo amplifier MELSERVO-J4 seriesMITSUBISHI
Standard Price : MYR 188.33-
Days to Ship : 4 Day(s) or more
-
-
MELSERVO-J3 Series Encoder Cable (Direct Type)MITSUBISHI
Standard Price : MYR 410.00-
Days to Ship : 4 Day(s) or more
-
-
MELSERVO-J3 Series Servomotor Power Supply Cable (Direct Connection Type)MITSUBISHI
Standard Price : MYR 350.00-
Days to Ship : 4 Day(s) or more
-
-
Rotating type servo motor HG-RR seriesMITSUBISHI
Standard Price : MYR 7,215.00-
Days to Ship : 97 Day(s)
-
One-touch servo motor HF-KN seriesMITSUBISHI
Standard Price : MYR 2,435.00-
Days to Ship : 4 Day(s) or more
-
AC Servo Motor (Cylinder Type), Driver G5 SeriesOMRON
Standard Price : MYR 2,527.61-
Days to Ship : 5 Day(s) or more
-
![AC Servo Motor [G Series]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005345710.jpg?$product_recommend_b$)
![AC Servo Motor [G Series]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005345710.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy