(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Picking sensor F3W
Click this image to zoom it.
Move the mouse over the image to zoom
Ideal for easy-to-read indicator lights in small bodies and picking systems for small parts.
[Features]
· F3W-D with a detection width of 100 mm and F3W-E with a detection width of 50 mm support various component sizes.
· A thin sensor with a thickness of 8 mm that can enlarge the working opening.
· A series also includes connector connection type. Compatible with “Smartclick” connector XS5; easy wiring with reduced man-hours.
Part Number
Configured Part Number is shown.
Drawing
F3 W-E Type
Projector
Light sensor
F3 W-D Type
Projector
Light sensor
Product Specification
Rating / Performance
F3 W-E Type
| Items | Type | ||
|---|---|---|---|
| F3 W-E032A6/A8 | F3 W-E032B6/B8 | ||
| Sensing method | Transmittance type | ||
| Sensing Distance | 30 to 300 mm | ||
| Optical axis pitch | 25 mm | ||
| Numbers of Optical Axis | 3 optical axis | ||
| Detection width | 50 mm | ||
| Standard detected object | ⌀28 mm or larger opaque object | ||
| Light source (emission wavelength) | Infrared emitting diode (860 nm) | ||
| Power supply voltage | 12 to 24 V DC +/- 10% ripple (p-p) 10% or less | ||
| Current Consumption | Projector: 40 mA or less, Receiver: 40 mA or less | ||
| Control output | NPN or PNP open collector output Load power supply voltage 30 V DC, Load current 100 mA or less (Residual voltage 1.8 V or less) Light-ON/Dark-ON switch changeover method | ||
| Picking instruction input | Contact or open collector input NPN input Lighting on input voltage: 0 to 2 V Lighting off input voltage: Open (leakage current 0.1 mA or less) PNP input Lighting on input voltage: (+DC-2) to +DC V * Lighting off input voltage: Open (leakage current 0.1 mA or less) | ||
| Emission stop input | Contact or open collector input NPN input Emission stop input voltage: 0 to 2 V Emission input voltage: Open (leakage current 0.1 mA or less) PNP input Emission stop input voltage: (+DC-2) to + DCV * Emission input voltage: Open (leakage current 0.1 mA or less) | ||
| Protection circuit | Power supply reverse connection protection, Output short circuit protection, Mutual interference prevention function (frequency selector switch method) | ||
| Response time | Operation and Recovery: 100 ms or less each | ||
| Indicator light | Light sensor | Operation indicator light (orange), Stability light indicator (green), Picking indicator light (orange) | |
| Projector | Power supply indicator light (green), Emission stop indicator light (orange), Picking indicator light (orange) | ||
| Ambient temperature range | Operating: -10 to +55℃, Storage: -25 to +70℃ (no freezing or condensation) | ||
| Ambient humidity range | When operating/storing: 35 to 85% RH each (no condensation) | ||
| Operating ambient illuminance | Sunlight: Light-receiving surface illuminance 10,000 lx, Incandescent lamp: Light-receiving surface illuminance 3,000 lx | ||
| Insulation resistance | 20 MΩ or more (500 V DC insulation resistance tester) | ||
| Withstand voltage | 1,000 V AC 50/60 Hz for 1 min | ||
| Vibration (endurance) | 10 to 50 Hz, 1.5 mm double-amplitude for 2 hours in each of X, Y, and Z directions | ||
| Shock (endurance) | 500 m/s2 in Each X, Y, Z Direction 3 times | ||
| Protective Structure | IP62, IEC60529 standard | ||
| Connection method | Pre-Wired Type (standard cord length 2 m) | Inline connector type (Standard cord length 0.3 m) (M12, 4-pin connector) | |
| Weight (packed state) | Approx. 125 g | Approx. 85 g | |
| Material | Case | ABS | |
| Lens section | Acrylic | ||
| Cord | oil-resistant PVC | ||
| Accessory | Instruction manual | ||
* +DC is the power supply voltage.
F3 W-D Type
| Items | Type | ||
|---|---|---|---|
| F3W-D052A(P) *1 | F3W-D052B(P) *1 | ||
| Sensing method | Transmittance type | ||
| Sensing Distance | 3 m (LONG mode: 1 to 3 m, SHORT mode: 0.05 to 1 m switch changeover) * SHORT mode when shipped | ||
| Optical axis pitch | 25 mm | ||
| Numbers of Optical Axis | 5 optical axis | ||
| Detection width | 100 mm | ||
| Standard detected object | ⌀35 mm or larger opaque object | ||
| Light source (emission wavelength) | Infrared emitting diode (860 nm) | ||
| Power supply voltage | 12 to 24 V DC +/- 10% ripple (p-p) 10% or less | ||
| Power consumption | Projector: 0.6 W or less, Receiver: 0.7 W or less | ||
| Control output | Load power supply voltage 30 V DC, Load current 100 mA or less (Residual voltage 1 V or less) NPN open collector output Light-ON/Dark-ON switch changeover type | ||
| Picking instruction input | Open collector with contact or non-contact input Lighting on input voltage: 0 to 2 V Lighting off input voltage: Open (leakage current 0.1 mA or less) | ||
| Protection circuit | Power supply reverse connection protection, Output short circuit protection, Mutual interference prevention function (frequency selector switch method) | ||
| Response time | Operation and Recovery: 10 ms or less each | ||
| Indicator light | Light sensor | Operation indicator light (orange), Stability light indicator (green), Picking indicator light (orange) 6 pcs., Transmission indicator light (orange) for UNI-WIRE direct connection type *2 | |
| Projector | Power supply indicator light (green), Different frequency indicator light (green), Picking indicator light (orange) 6 pcs., Transmission indicator light (orange) for UNI-WIRE direct connection type *2 | ||
| Ambient temperature range | Operating: -10 to +55℃, Storage: -25 to +70℃ (no freezing or condensation) | ||
| Ambient humidity range | When operating/storing: 35 to 85% RH each (no condensation) | ||
| Insulation resistance | 20 MΩ or more (500 V DC insulation resistance tester) | ||
| Withstand voltage | 1,000 V AC 50/60 Hz for 1 min | ||
| Vibration (endurance) | 10 to 50 Hz, 1.5 mm double amplitude for 2 hours in each of X, Y, and Z directions | ||
| Shock (endurance) | 500 m/s2 in Each X, Y, Z Direction 3 times | ||
| Protective Structure | IEC standard IP62 (with the operation cover closed) | ||
| Connection method | Pre-wired type (standard cord length 5 m) | Inline connector type (standard cord length 2 m) (M12, 5-pin connector) | |
| Weight (packed state) | Approximately 360 g | Approx. 230 g | |
| Material | Case and indicator windows | ABS | |
| Lens section | Acrylic | ||
| Operation cover | Nylon (PA6) | ||
| Accessory | Instruction manual | ||
* 1. The F3W-D052*P type projectors are provided with the external picking indicator output line shown in the table below.
| Items | Type |
|---|---|
| F3 W-D052AP, F3 W-D052BP | |
| Connection method | Pre-wired (standard cord length 300 mm) |
| Electrical specifications | Output current: 50 mA or less Output Voltage: Fixed sensor power supply voltage |
* 2. The transmission indicator light indicates the bus transmission status.
| Part Number |
|---|
| F3W-D052A 2M |
| F3W-D052A 5M |
| F3W-D052AP 5M |
| F3W-D052B 2M |
| F3W-D052C 5M |
| F3W-D052D 1M |
| F3W-D052D 2M |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detected Objects | Detection Method | Light Source | Ambient Operating Temperature (°C) | Detection Distance (mm) | Output Mode | Cable Length (m) | Response Time (Standard Mode) (ms) | Numbers of Beam Channel | Detection Distance Details (mm) | Sensor Function | Connection Method | Cord Length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,904.26 | 1 Piece(s) | 5 Day(s) or more | Opaque Objects | [Transparent] Through Beam Type | Infrared LED | -10～55 | 3000 | NPN | 2 | 10 | 5 | 3000 | Standard | Pre-wired type | 2 | ||
MYR 1,502.49 | 1 Piece(s) | 9 Day(s) or more | Opaque Objects | [Transparent] Through Beam Type | Infrared LED | -10～55 | 3000 | NPN | 5 | 10 | 5 | 3000 | Standard | Pre-wired type | 5 | ||
MYR 2,354.33 | 1 Piece(s) | 9 Day(s) or more | Opaque Objects | [Transparent] Through Beam Type | Infrared LED | -10～55 | 3000 | NPN | 5 | 10 | 5 | 3000 | External indicator light can be connected | Pre-wired type | 5 | ||
MYR 2,189.21 | 1 Piece(s) | 9 Day(s) or more | Opaque Objects | [Transparent] Through Beam Type | Infrared LED | -10～55 | 3000 | NPN | 2 | 10 | 5 | 3000 | Standard | Inline connector type (M12) | 2 | ||
MYR 2,035.98 | 1 Piece(s) | 9 Day(s) or more | Opaque Objects | [Transparent] Through Beam Type | Infrared LED | -10～55 | 50～3000 | PNP | 5 | - | 5 | 50 to 3000 | Standard | Pre-wired type | 5 | ||
MYR 1,998.61 | 1 Piece(s) | 9 Day(s) or more | - | - | - | - | - | PNP | - | - | - | 50 to 3000 | Standard | Inline connector type (M12) | 1 | ||
MYR 2,189.21 | 1 Piece(s) | 9 Day(s) or more | Opaque Objects | [Transparent] Through Beam Type | Infrared LED | -10～55 | 50～3000 | PNP | 2 | - | 5 | 50 to 3000 | Standard | Inline connector type (M12) | 2 |
Loading...
Basic Information
| Type | Photoelectric sensor | Amplifier Installation Type | Amplifier Built-in Type | Detection Distance [Classification](mm) | ~3000 |
|---|---|---|---|---|---|
| Operation Mode | Light-ON/Dark-ON changeover type | Type | Built-In Type | Light Source | Infrared light |
| Detected Object | Opaque object | Detection Method | Through-Beam | Operating Ambient Temperature Range(°C) | -10 to +55 |
| Number of Optical Axes | 5 |
Specification/Dimensions
-
Detected Objects
- Opaque Objects
-
Detection Method
- Transparent
- Transparent
-
Light Source
- Infrared LED
-
Detection Distance(mm)
-
Output Mode
- NPN
- PNP
-
Cable Length(m)
-
Response Time (Standard Mode)(ms)
-
Numbers of Beam Channel
- 5
-
Detection Distance Details(mm)
- 50 to 3000
- 3000
-
Sensor Function
- External indicator light can be connected
- Standard
-
Connection Method
- Inline connector type (M12)
- Pre-wired type
-
Cord Length(m)
- 1
- 2
- 5
-
type
- F3W-D
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Area Sensor, Ultra-Thin Type
- Area Sensor, General Purpose
- Photoelectric Sensors with Built-In Amplifier [E3S]
- Oil-Resistant, Robust and Compact Photoelectric Sensor [E3ZM-C]
- Color mark detection, small amplifier built-in photoelectric sensor [E3ZM-V]
- Photoelectric Sensor for Transparent Object Detection [E3S]
- Oil Resistant Photoelectric Sensor [E3ZR-C]
- Laser Diffuse Sensor, SOOD Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy