(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Sealed compact basic switch D2VW
Sealed type (IP67 compliant: excluding the terminals on terminal models), miniature basic size.
[Features]
·Stable sealing capability is ensured by the use of epoxy resin. It can be used in places subject to water spray, excessive dust, etc.
· The internal structure adopts the mechanism of the V series, achieving high accuracy and high durability. Installation is the same as the V type.
· Supports use in applications requiring environmental resistance for automotive, agricultural machinery, large home appliances, and commercial equipment.
(i)Caution
- The product images are representative only. Specifications may vary by part number, including shape and color.
Part Number
Configured Part Number is shown.
Drawing
Pin push button type
Specifications Table
| 300 mm type | 1,000 mm type | |
|---|---|---|
| L | 300±10 | 1,000±30 |
Performance
| Items | Part number | ||
|---|---|---|---|
| D2VW-5 series | D2VW-01 series | ||
| Allowable operation speed | 0.1 mm to 1 m/s (for pin push button type) | ||
| Allowable operation frequency | Mechanical | 300 times/min | |
| Electrical | 60 times/min | ||
| Insulation resistance | 100 MΩ or more (at 500 V DC with insulation resistance tester) | ||
| Contact resistance (initial value) | Terminal type | 50 mΩ or less | |
| Lead wire type (300 mm) | 100 mΩ or less | ||
| Lead wire type (1,000 mm) | 200 mΩ or less | ||
| Withstand voltage*1 | Between terminals of the same polarity | 1,000 V AC 50/60 Hz for 1 min | |
| Between current-carrying metal parts and ground | 1,500 V AC 50/60 Hz for 1 min | ||
| Between each terminal and non-current-carrying metal part | 1,500 V AC 50/60 Hz for 1 min | ||
| Vibration*2 | Malfunction | Frequency 10 to 55 Hz double amplitude 1.5 mm | |
| Impact*2 | Endurance | Max. 1,000 m/s2 | |
| Malfunction | Max. 300 m/s2 | ||
| Durability | Mechanical | More than 10 million times (60 times/min) | |
| Electrical | More than 100,000 times (30 times/min) | More than 1 million times (30 times/min) | |
| Protective Structure | Terminal type | IEC IP67 (excluding the terminals on terminal models) | |
| Lead wire type | IEC standard IP67 | ||
| Appliance Class | Class I | ||
| PTI (Proof Tracking Index) | 175 | ||
| Operating temperature range | -40 to +85℃ 60% RH or less (no freezing or condensation) | ||
| Operating humidity range | 95% RH or less (+5 to +35℃) | ||
| Weight | Approximately 7 g (for terminal type pin push button type) | ||
*The values given above are initial values.
* 1. The withstand voltages are those when a separator is used.
*2. The given values apply to the free position and total travel position for the pin push button type; the total travel position for the lever type. The closed or open circuit of the contact is within 1 ms.
Product Specification
Operating characteristics
| Type | Actuator | Part number | Operating force | Release force | Pre travel | Over travel | Movement differential | Operating position |
|---|---|---|---|---|---|---|---|---|
| max.OF | min. RF | max. PT | min. OT | max. MD | OP | |||
| Terminal | Pin push button type | D2VW-5-1 D2VW-01-1 | 1.96 N | 0.29 N | 1.2 mm | 1.0 mm | 0.4 mm | 14.7 +/- 0.4 mm |
| Lead | Pin push button type | D2VW-5-1M D2VW-5-1M-0 D2VW-01-1M D2VW-01-1M-0 | 1.96 N | 0.29 N | 1.2 mm | 1.0 mm | 0.4 mm | 14.7 +/- 0.4 mm |
| Hinge Short lever type | D2VW-5L1A-1M D2VW-5L1A-1M-0 D2VW-01L1A-1M D2VW-01L1A-1M-0 | 1.96 N | 0.20 N | 1.6 mm | 0.8 mm | 0.5 mm | 15.2 +/- 0.5 mm | |
| Hinge lever type | D2VW-5L1-1M D2VW-5L1-1M-0 D2VW-01L1-1M D2VW-01L1-1M-0 | 1.18 N | 0.15 N | 4.0 mm | 1.6 mm | 0.8 mm | 15.2 +/- 1.2 mm | |
| Hinge Long lever type | D2VW-5L1B-1M D2VW-5L1B-1M-0 D2VW-01L1B-1M D2VW-01L1B-1M-0 | 0.59 N | 0.05 N | 9.0 mm | 3.2 mm | 2.0 mm | 15.2+/-2.6 mm | |
| Hinge simulated roller lever type | D2VW-5L3-1M D2VW-5L3-1M-0 D2VW-01L3-1M D2VW-01L3-1M-0 | 1.18 N | 0.15 N | 4.0 mm | 1.6 mm | 0.8 mm | 18.7+/-1.2 mm | |
| Hinge roller Short lever type | D2VW-5L2A-1M D2VW-5L2A-1M-0 D2VW-01L2A-1M D2VW-01L2A-1M-0 | 2.25 N | 0.20 N | 1.6 mm | 0.8 mm | 0.5 mm | 20.7+/-0.6 mm | |
| Hinge roller lever type | D2VW-5L2-1M D2VW-5L2-1M-0 D2VW-01L2-1M D2VW-01L2-1M-0 | 1.18 N | 0.15 N | 4.0 mm | 1.6 mm | 0.8 mm | 20.7+/-1.2 mm |
*The values for operating characteristics apply to operation in the A direction (down).
Model number display
Model Standard
Contact Specifications
The color in the parentheses indicates the color of the lead wire
Technical Information
Rating
| Type | Rated Voltage | Items |
|---|---|---|
| Resistant load | ||
| D2VW-5 series | AC250V AC125V | 5A 5A |
| 30 V DC | 5A | |
| D2VW-01 series | AC125V | 0.1 A |
| 30 V DC | 0.1 A |
*The above ratings are based on tests conducted under the following conditions.
(1) Ambient temperature: 20+/-2°C
(2) Ambient humidity: 65 +/- 5% RH
(3) Operation frequency: 30 times/min
Contact Specifications
| Items | Type | ||
|---|---|---|---|
| D2VW-5 series | D2VW-01 series | ||
| Contact | Specifications | Rivet | Crossbar |
| Material | Silver Alloy | Gold Alloy | |
| Interval (standard value) | 0.5 mm | ||
| Inrush Current | Normally closed | Max. 15 A | - |
| Normally open | Max. 15 A | - | |
| Minimum applicable load (reference value) * | 5 V DC 160 mA | 5 V DC 1 mA | |
* For the minimum applicable load, refer to "· Using microloads" under "Correct Usage".
Usage Examples
Mounting Hole Dimensions
Precautions for use
Installation
The switch should be securely installed using M3 screws and plain washers or spring lock washers, etc. The tightening torque should be 0.39 to 0.59 N⋅m.
Operating body
With the pin push button models, set the switch so that the push button can be pushed in from directly above. The push button is covered with a rubber cap, and if a load is applied to the push button from the lateral direction, the button may be damaged or the sealing capability may deteriorate.
Handling
Handle the switch with care to prevent the seal rubber on the push button from breaking.
Using Microloads
Using the switch with general loads during opening and closing the microload circuit may cause contact failure. Referring to the figure below, you should use the switch within the range of the usage area. Even when the microload type is used within the area shown in the figure below, if a load that generates an inrush current, etc., is applied at the time of opening and closing, the contact will be subjected to severe contact wear and tear, which may cause a decrease in durability. Therefore, a contact protection circuit should be inserted if necessary. The minimum applicable load is the N level reference value. It represents the failure level at a reliability level of 60% (λ60).
(JIS C5003)
λ60 = 0.5 x 10-6 /times indicates that failures of 1/2,000,000 times or less are estimated at a reliability level of 60%.
Cautions and Prohibitions
Safety Precautions
Protective structure
Do not use it underwater.
The lead wire type satisfies the test conditions for the following regulations, but all of these tests are to check the ingress of water after being left in water for a certain period of time, not for switching operation underwater.
JIS C0920: Degrees of protection provided by enclosures (IP code)
IEC 60529: Degrees of protection provided by enclosures (IP Code)
Protection rating: IP67 (Check for water ingress after it was left in water 1 m deep for 30 minutes)
Protection against adhesion of chemicals, etc.
Avoid contact with oil and chemicals.
Otherwise, it may alter or deteriorate the materials used.
About Soldering
- Connection to soldering terminals
When soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and conduct soldering.
As a general rule, the processing time for soldering should be 5 seconds or less with a soldering iron tip temperature of 350 to 400°C, and no external force should be applied for 1 minute after soldering. Working at excessive temperatures or heating for long periods of time can cause deterioration of switch characteristics.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detector Shape | Rated Operating Voltage (V) | Lever Shape Type | DC Rated Operating Voltage (V) | Plunger Shape Type | Acquired Standards | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Contact Type | Contact Point Type | Contact Material | Mechanical Life (10,000 times) | Mechanical Operation Frequency (times/min or Less) | Rated Conductance Current (A) | Main Body External Dimension, Length L (mm) | Torque Necessary for Operation (mN/m) | Actuator type | Specification of Terminal | Length of lead wire (m) | Movement After the Operation OT (mm) | Operating Position OP (mm) | Contact Spacing (mm) | Contact structure/specification | Details Type | Required Force for Push Side, O.F. (detailed numerical values) (N) | DC Rated Voltage (v) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 18.86 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | - | 30 | Top Plunger | - | ~2 | 1.2 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | 33 | 1960 | Pin push button type | Terminals with solder | - | 1 | 14.7±0.4 | 0.5 | 1c | - | 1.96 | - | ||
MYR 27.37 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | - | 30 | Top Plunger | UL / CSA | ~2 | 1.2 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | 33 | 1960 | Pin push button type | Lead Wire type | 0.3 | 1 | 14.7±0.4 | 0.5 | 1c | - | 1.96 | - | ||
MYR 21.15 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 | - | 30 | - | - | ~2 | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 1180 | Hinge, lever type | Terminals with solder | - | 1.6 | 15.2±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 29.66 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 | - | 30 | - | - | ~2 | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 1180 | Hinge, lever type | Lead Wire type | 0.3 | 1.6 | 15.2±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 31.33 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | - | ~2 | 4 | Single Pole Normally Open | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 1180 | Hinge, lever type | With lead wire(300mm) | 0.3 | 1.6 | 15.2±1.2 | 0.5 | 1a | - | 1.18 | - | ||
MYR 20.10 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | - | ~1 | 9 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 590 | Hinge, long lever type | Terminals with solder | 0.3 | 3.2 | 15.2±2.6 | 0.5 | 1c | - | 0.59 | - | ||
MYR 29.66 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 | - | 30 | - | - | ~1 | 9 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 590 | Hinge, long lever type | Lead Wire type | 0.3 | 3.2 | 15.2±2.6 | 0.5 | 1c | - | 0.59 | - | ||
MYR 24.65 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 | Roller Lever | 30 | - | - | ~2 | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 1180 | Hinge, roller, lever type | Terminals with solder | - | 1.6 | 20.7±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 27.95 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | UL / CSA | ~2 | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 1180 | Hinge, roller, lever type | Terminals with solder | 0.3 | 1.6 | 20.7±1.2 | 0.5 | 1c | Safety Standard Certified Product | 1.18 | - | ||
MYR 32.02 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 | Roller Lever | 30 | - | - | ~2 | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 1180 | Hinge, roller, lever type | Lead Wire type | 0.3 | 1.6 | 20.7±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 24.65 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 | Roller Lever | 30 | - | - | ~3 | 1.6 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 2250 | Hinge, roller, short lever type | Terminals with solder | - | 0.8 | 20.7±0.6 | 0.5 | 1c | - | 2.25 | - | ||
MYR 25.03 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | UL / CSA | ~2 | 1.6 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | Terminals with solder | 0.3 | 0.8 | 20.7±0.6 | 0.5 | 1c | Safety Standard Certified Product | 2.25 | - | ||
MYR 34.15 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | - | ~2 | 1.6 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | With lead wire(1000mm) | 1 | 0.8 | 20.7±0.6 | 0.5 | 1c | - | 2.25 | - | ||
MYR 32.02 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 | Roller Lever | 30 | - | UL / CSA | ~3 | 1.6 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 2250 | Hinge, roller, short lever type | Lead Wire type | 0.3 | 0.8 | 20.7±0.6 | 0.5 | 1c | - | 2.25 | - | ||
MYR 30.22 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 30 DC | [Hinge Lever] Hinge Lever | 30 | - | UL | ~3 | 2.25 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 2250 | Hinge roller short lever type | With lead (300 mm) | 0.3 | 0.8 | 20.7±0.6 | - | 1c (double throw) | Micro Switch / Safety standard certified product | - | 30 | ||
MYR 30.62 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | - | ~3 | 1.6 | Single Pole Normally Close | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | With lead wire(300mm) | 0.3 | 0.8 | 20.7±0.6 | 0.5 | 1b | - | 2.25 | - | ||
MYR 19.52 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | - | ~3 | 1.6 | Single Pole Normally Open | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | Terminals with solder | 0.3 | 0.8 | 20.7±0.6 | 0.5 | 1a | - | 2.25 | - | ||
MYR 33.75 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | - | ~2 | 1.6 | Single Pole Normally Open | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | With lead wire(300mm) | 0.3 | 0.8 | 20.7±0.6 | 0.5 | 1a | - | 2.25 | - | ||
MYR 29.66 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 | - | 30 | - | - | ~2 | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | 0.1 | - | 1180 | Simulated hinge lever type | Lead Wire type | 0.3 | 1.6 | 18.7±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 30.63 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | - | ~2 | 4 | Single Pole Normally Open | [Crossbar] Crossbar | Gold alloy | 1000 | 300 | - | - | 1180 | Hinge, earl, lever type | With lead wire(300mm) | 0.3 | 1.6 | 18.7±1.2 | 0.5 | 1a | - | 1.18 | - | ||
MYR 17.07 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 ～ 250 | - | 30 | Top Plunger | UL / CSA | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | 33 | 1960 | Pin push button type | Terminals with solder | - | 1 | 14.7±0.4 | 0.5 | 1c | - | 1.96 | - | ||
MYR 16.36 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 | - | - | Top Plunger | UL / CSA | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | - | - | 1960 | Pin push button type | Terminals with solder | 0.3 | 1 | 14.7±0.4 | 0.5 | 1c | Safety Standard Certified Product | 1.96 | - | ||
MYR 24.65 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 125 ～ 250 | - | 30 | Top Plunger | - | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | 33 | 1960 | Pin push button type | Terminals with solder | - | 1 | 14.7±0.4 | 0.5 | 1c | - | 1.96 | - | ||
MYR 25.99 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125/250 | - | 30 | Roller Plunger | - | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | - | - | 5 | 33 | 1960 | Short hinge roller plunger type | Lead Wire type | 2 | 1 | 14.7±0.4 | 0.5 | 1c | - | 1.96 | - | ||
MYR 27.27 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125/250 | - | 30 | Roller Plunger | - | ~2 | 1.2 | Single Pole Normally Close | Rivet | Silver alloy | - | - | 5 | 33 | 1960 | Short hinge roller plunger type | Terminals with solder | 0.3 | 1 | 14.7±0.4 | 0.5 | 1b | - | 1.96 | - | ||
MYR 19.36 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 ～ 250 | - | 30 | - | - | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 1180 | Hinge, lever type | Terminals with solder | - | 1.6 | 15.2±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 25.80 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 ～ 250 | - | 30 | - | - | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 1180 | Hinge, lever type | Lead Wire type | 0.3 | 1.6 | 15.2±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 25.80 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 ～ 250 | - | 30 | - | UL / CSA | ~2 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 1960 | Hinge, short lever type | Lead Wire type | 0.3 | 0.8 | 15.2±1.2 | 0.5 | 1c | - | 1.96 | - | ||
MYR 19.75 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | - | ~2 | 1.6 | Single Pole Normally Open | Rivet | Silver alloy | 1000 | 300 | - | - | 1960 | Hinge, short lever type | With lead wire(300mm) | 0.3 | 0.8 | 15.2±0.5 | 0.5 | 1a | - | 1.96 | - | ||
MYR 26.08 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 ～ 250 | - | 30 | - | - | ~1 | 9 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 590 | Hinge, long lever type | Lead Wire type | 0.3 | 3.2 | 15.2±1.2 | 0.5 | 1c | - | 0.59 | - | ||
MYR 22.29 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 ～ 250 | Roller Lever | 30 | - | - | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 1180 | Hinge, roller, lever type | Terminals with solder | - | 1.6 | 20.7±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 27.65 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 ～ 250 | Roller Lever | 30 | - | - | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 1180 | Hinge, roller, lever type | Lead Wire type | 0.3 | 1.6 | 20.7±1.2 | 0.5 | 1c | - | 1.18 | - | ||
MYR 24.91 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | - | ~2 | 4 | Single Pole Normally Close | Rivet | Silver alloy | 1000 | 300 | - | - | 1180 | Hinge, roller, lever type | With lead wire(300mm) | 0.3 | 1.6 | 20.7±1.2 | 0.5 | 1b | - | 1.18 | - | ||
MYR 29.98 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | - | ~2 | 4 | Single Pole Normally Open | Rivet | Silver alloy | 1000 | 300 | - | - | 1180 | Hinge, roller, lever type | With lead wire(300mm) | 0.3 | 1.6 | 20.7±1.2 | 0.5 | 1a | - | 1.18 | - | ||
MYR 22.29 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 ～ 250 | Roller Lever | 30 | - | - | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 2250 | Hinge, roller, short lever type | Terminals with solder | - | 0.8 | 20.7±1.2 | 0.5 | 1c | - | 2.25 | - | ||
MYR 33.33 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | - | ~2 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | With lead wire(1000mm) | 1 | 0.8 | 20.7±0.6 | 0.5 | 1c | - | 2.25 | - | ||
MYR 26.94 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 ～ 250 | Roller Lever | 30 | - | - | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 2250 | Hinge, roller, short lever type | Lead Wire type | 0.3 | 0.8 | 20.7±1.2 | 0.5 | 1c | - | 2.25 | - | ||
MYR 30.62 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | - | ~3 | 1.6 | Single Pole Normally Close | Rivet | Silver alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | With lead wire(300mm) | 0.3 | 0.8 | 20.7±0.6 | 0.5 | 1b | - | 2.25 | - | ||
MYR 25.54 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | - | ~3 | 1.6 | Single Pole Normally Open | Rivet | Silver alloy | 1000 | 300 | - | - | 2250 | Hinge, roller, short lever type | With lead wire(300mm) | 0.3 | 0.8 | 20.7±0.6 | 0.5 | 1a | - | 2.25 | - | ||
MYR 17.24 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | UL / CSA | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | - | - | 1180 | Hinge, earl, lever type | Terminals with solder | 0.3 | 1.6 | 18.7±1.2 | 0.5 | 1c | Safety Standard Certified Product | 1.18 | - | ||
MYR 25.80 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 ～ 250 | - | 30 | - | - | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 1000 | 300 | 5 | - | 1180 | Simulated hinge lever type | Lead Wire type | 0.3 | 1.6 | 18.7±1.2 | 0.5 | 1c | - | 1.18 | - |
Loading...
Basic Information
| Operating Temperature Range(℃) | -40::85 | Protection Structure | IP67 | Main Body External Dimension, Width W(mm) | 10.3 |
|---|---|---|---|---|---|
| Main Body External Dimension, Height H(mm) | 15.9 | Mounting Format | Screw mounting |
Specification/Dimensions
-
Detector Shape
- Plunger Type
- Lever Shape (push)
-
Rated Operating Voltage(V)
- 125
- 250
- 125/250
- 30 DC
-
Lever Shape Type
- Hinge Lever
- Roller Lever
- Hinge Lever
-
DC Rated Operating Voltage(V)
- 30
-
Plunger Shape Type
- Top Plunger
- Roller Plunger
-
Acquired Standards
- UL
- CSA
-
Force Required for Push Side O.F.(N)
-
Contact Type
- Single Pole Double Throw
- Single Pole Normally Close
- Single Pole Normally Open
-
Contact Point Type
- Rivet
- Crossbar
-
Contact Material
- Silver alloy
- Gold alloy
-
Rated Conductance Current(A)
-
Torque Necessary for Operation(mN/m)
-
Actuator type
- Hinge roller short lever type
- Hinge, earl, lever type
- Hinge, lever type
- Hinge, long lever type
- Hinge, roller, lever type
- Hinge, roller, short lever type
- Hinge, short lever type
- Pin push button type
- Short hinge roller plunger type
- Simulated hinge lever type
-
Specification of Terminal
-
Length of lead wire(m)
- 0.3
- 1
- 2
- -
-
Movement After the Operation OT(mm)
-
Operating Position OP(mm)
- 14.7±0.4
- 15.2±0.5
- 15.2±1.2
- 15.2±2.6
- 18.7±1.2
- 20.7±0.6
- 20.7±1.2
-
Contact Spacing(mm)
- 0.5
-
Contact structure/specification
-
Details Type
-
Required Force for Push Side, O.F. (detailed numerical values)(N)
- 0.59
- 1.18
- 1.96
- 2.25
-
DC Rated Voltage(v)
- 30
-
type
- D2VW
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Small Basic Switch [D2MV]
- Ultra Compact Basic Switch [D2S]
- Ultra-Small Basic Switch [D2F]
- Ultra Compact Basic Switch [J]
- Small Basic Switch for High Temperatures [TZ]
- Sealed Ultra Subminiature Basic Switch [D2HW]
- Power Supply Switch for Door [D2D]
- Small Door Switch [D3D]
Customers Who Viewed This Item Also Viewed
-
-
![Miniature Basic Switch [VX]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559105_1.jpg?$product_recommend_b$)
-
-
![Ultra Small Basic Switch [SS]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559138_001.jpg?$product_recommend_b$)
-
![Sealed Type Ultra-Small Basic Switch [D2SW]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138158.jpg?$product_recommend_b$)
Sealed Type Ultra-Small Basic Switch [D2SW]OMRON
Standard Price : MYR 12.62-
Days to Ship : 2 Day(s) or more
-
![Small Basic Switch [D2RV]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559082_1.jpg?$product_recommend_b$)
-
![Small Basic Switch [D2MV]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559071.jpg?$product_recommend_b$)
-
![Compact Sealed Switch [ZC-*55]](//content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/221000559419/221000559419_20230801115836.jpg?$product_recommend_b$)
-
![Sealed Ultra Subminiature Basic Switch [D2HW]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138125_1.jpg?$product_recommend_b$)
Sealed Ultra Subminiature Basic Switch [D2HW]OMRON
Standard Price : MYR 8.11-
Days to Ship : 1 Day(s) or more
-
![Ultra-Small Basic Switch [D2F]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559149_001.jpg?$product_recommend_b$)
-
![M4 Mounting Seal Type Basic Switch [D2FW-G]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138103.jpg?$product_recommend_b$)
M4 Mounting Seal Type Basic Switch [D2FW-G]OMRON
Standard Price : MYR 21.68-
Days to Ship : 5 Day(s) or more
-
![Ultra Compact Basic Switch [D2S]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559116.jpg?$product_recommend_b$)
![Miniature Basic Switch [VX]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559105_1.jpg?$product_recommend_b$)
![Ultra Small Basic Switch [SS]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559138_001.jpg?$product_recommend_b$)
![Sealed Type Ultra-Small Basic Switch [D2SW]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138158.jpg?$product_recommend_b$)
![Small Basic Switch [D2RV]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559082_1.jpg?$product_recommend_b$)
![Small Basic Switch [D2MV]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559071.jpg?$product_recommend_b$)
![Compact Sealed Switch [ZC-*55]](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/221000559419/221000559419_20230801115836.jpg?$product_recommend_b$)
![Sealed Ultra Subminiature Basic Switch [D2HW]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138125_1.jpg?$product_recommend_b$)
![Ultra-Small Basic Switch [D2F]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559149_001.jpg?$product_recommend_b$)
![M4 Mounting Seal Type Basic Switch [D2FW-G]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138103.jpg?$product_recommend_b$)
![Ultra Compact Basic Switch [D2S]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559116.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy