(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Rotary table HRQ series
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
Air-operated rotary table.
[Features]
· The rack & pinion structure provides stable motion and high accuracy.
· Twin rods deliver double the output.
· Improved table processing accuracy makes workpiece mounting easier.
· The center of the table is hollowed out, making wiring and piping convenient.
· Fixing pin holes are provided on both sides of the main body, allowing for mounting and use.
· You can choose between rubber cushions and shock absorbers for cushioning. The maximum cushion energy of the shock absorber is 3 to 5 times greater than that of the screw-adjusted fixing cushion, providing higher effectiveness.
[Applications]
· Ideal for lines that require high-accuracy positioning.
(i)Caution
- Only a part of the lineup is available at MISUMI. Please use filtering criteria to confirm details.
Part Number
Configured Part Number is shown.
Drawing
HRQ10, 20
HRQ□-A (with shock absorber) A directionProduct Specification
| Standard | HRQ10 | HRQ20 | |
| Operation method | Double piston rack & pinion type double acting | ||
| Operating fluid | Air (Please use air filtered with a filter of 40 μm or larger) | ||
| Operating pressure range | With Adjusting Bolt | 0.15 to 0.7 MPa (22 to 100 psi) (1.5 to 7.0 bar) | |
| With shock absorber | 0.15 to 0.7 MPa (22 to 100 psi) (1.5 to 7.0 bar) | ||
| Proof pressure | 1.2 MPa (175 psi) (12.0 bar) | ||
| Ambient temperature and operating fluid temperature | -20 to 70°C | ||
| Rotation angle range | 0-190° | ||
| Repeat accuracy | With Adjusting Bolt | 0.2° | |
| With shock absorber | 0.05° | ||
| Theoretical torque (Nm) (0.5 MPa) | 1.1 | 2.2 | |
| Cushion | With Adjusting Bolt | Rubber cushion | |
| With shock absorber | Shock absorber | ||
| Pipe connection port diameter | End face port | M5 x 0.80 | |
| Side Port | |||
| Weight (g) | 535 | 940 | |
| Part number | Allowable Kinetic Energy (J) | Table Oscillation Time Range (s/90°) | ||
| With Adjusting Bolt | With Shock Absorber | With Adjusting Bolt | With Shock Absorber | |
| HRQ10 | 0.01 | 0.04 | 0.2 to 1.0 | 0.2 to 0.7 |
| HRQ20 | 0.025 | 0.12 | 0.2 to 1.0 | 0.2 to 0.7 |
Please make sure that the kinetic energy does not exceed the allowable value.
[ ! ] Please note that if the oscillation time exceeds the adjustment range shown in the table above, it will exceed the shock absorber's energy absorption capacity.
Internal structure and materials
| Number | Product Name | Material |
| 1 | Adjustment screw | Carbon steel |
| 2 | Hexagon flange nut | Carbon steel |
| 3 | Gasket | Bare steel with rubber |
| 4 | Rod side cover | aluminum alloy |
| 5 | Main body | aluminum alloy |
| 6 | hex socket head cap screw | Carbon steel |
| 7 | dial plate | aluminum alloy |
| 8 | hex socket bolt | Carbon steel |
| 9 | positioning pin | Carbon steel |
| 10 | Deep Groove Ball Bearing | Bearing steel |
| 11 | bearing retainer | aluminum alloy |
| 12 | Deep Groove Ball Bearing | Bearing steel |
| 13 | End Cover | aluminum alloy |
| Number | Product Name | Material |
| 14 | Steel ball | Stainless steel |
| 15 | Piston o-ring | NBR |
| 16 | Wear-resistant packing | Friction material |
| 17 | Magnet | Rare earth material |
| 18 | Rack | Stainless steel |
| 19 | Gear | Chrome molybdenum steel |
| 20 | O-ring | NBR |
| 21 | Wear-resistant packing | NBR |
| 22 | O-ring | NBR |
| 23 | O-ring | NBR |
| 24 | Hex Bolt | Stainless steel |
| 25 | Shock absorber | - |
Specifications Table
Part Number Examples
| (1) Specifications | (2) Standard | (3) Cushion | (4) Type of port thread |
| HRQ: Rotating series | 10 | Blank: Rubber Cushion A: Shock absorber | Blank: M5 |
| 20 |
| Standard/ Symbol A | A (With shock absorber type) | A (With Adjusting Bolt) | AC | AD | B | BA | C | CA | CB | E | EA (Shock absorber type ) | EA (With Adjusting Bolt) |
| 10 | 121 | 112 | 92 | 9.5 | 50 | 54 | 47 | 34 | 13 | M10 × 1.0 | 29 | 20 |
| 20 | 169 | 143 | 117 | 11 | 65 | 69 | 54 | 37 | 17 | M12 × 1.0 | 52 | 26 |
| Standard/Symbol | EB | EC | G | J | JA | JB | JC | K | KA | KC | P | PA | PB | Q | QA | QB | R | RA | S |
| 10 | 20.5 | 14 | 5 | 11 | 6.5 | 60 | 27 | M8 × 1.25 | 12 | 6.5 | M5 × 0.8 | 34.5 | 28 | M5 × 0.8 | 4.5 | 29 | 20 (H9) | 4.5 | 45 (h9) |
| 20 | 27.5 | 16 | 9 | 14 | 8.5 | 76 | 34 | Ml0-1.50 | 15 | 8.5 | M5 × 0.8 | 47 | 30 | M5 × 0.8 | 6 | 30 | 28 (H9) | 6.5 | 60 (h9) |
| Standard/Symbol | SA | T | TA | U | UA | V | UA | W | WA | WB | X | XA | XB | Y | YA | YB | YC |
| 10 | 8 | 46 (h9) | 4.5 | 15 (h9) | 3 | M5 × 0.8 | 8 | M5 × 0.8 | 8 | 32 | 3 (H9) | 3.5 | 16 | 3 (H9) | 3.5 | 56 | 40 |
| 20 | 10 | 61 (h9) | 6.5 | 17 (H9) | 2.5 | M6 × 1.0 | 8 | M6 × 1.0 | 10 | 43 | 4 (h9) | 4.5 | 21.5 | 4 (h9) | 4.5 | 74 | 50 |
Usage Example
Mounting and Usage
1. Swing Direction and Angle Adjustment
1.1. Swing Direction
A) Based on the positioning pin of the rotary table, as shown in the figure above, the maximum swing angle is 190°.
B) When pressure is applied to the AJ port, the table rotates clockwise; when pressure is applied to the B port, the table rotates counterclockwise.
1.2. Angle Adjustment Example (Calculation Example: Oscillation Angle 90°)
Adjust adjustment screw B
Adjust adjustment screw A
Adjust adjustment screws A and B simultaneously
| Part number | Rotating Table Angle Adjustment / One Rotation |
| (Adjust the screw or shock absorber) | |
| HRQ10 | 10.2° |
| HRQ20 | 6.5° |
2. When the product is shipped from the factory, the oscillation angle is set to the maximum. If you adjust it beyond this range, performance may decrease, so please be careful.
3. If the product is operated with kinetic energy exceeding the allowable value, it may become damaged and unusable. Please ensure that the kinetic energy does not exceed the allowable value.
4. As this product is lubrication-free, do not apply any lubrication.
5. The HRQ series is equipped with either a rubber cushion or a shock absorber, so please ensure the operating pressure is at least 0.1 MPa.
6. Please follow the tightening torque values for the shock absorber fixing nut as shown in the table below.
| Shock absorber specifications | Tightening torque of fixing nut (N⋅m) |
| M10 | 3.5 |
| M12 | 8 |
| M14 | 11 |
| M20 | 24 |
| M27 | 63 |
7. Do not turn the screw at the end of the shock absorber under any circumstances. It may cause leakage.
8. The shock absorber is a consumable part. If a decrease in energy absorption capacity is observed, replacement is required. The HRQ series shock absorber has a different structure from general shock absorbers and can be used even if there is residual pressure inside the cylinder, so do not install general products.
| Rotating Series Specifications | Shock absorber specifications |
| HRQ10 | ACA1006-A |
| HRQ20 | ACA1215-A |
9. Adjust the table run-out and parallelism strictly in accordance with the requirements in the table below.
| Items | Specific Requirements (mm) | Relative Reference Plane |
| Parallelism of Table Surface | 0.1 | A |
| Table Surface Run-out | 0.1 | A |
| Cylindrical surface run-out of the table | 0.1 | B |
| Part Number |
|---|
| HRQ10 |
| HRQ10-A |
| HRQ20 |
| HRQ20-A |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Theoretical torque (0.5Mpa) (N・m) | Allowable Kinetic Energy (J) | Allowable Kinetic Energy 2 (J) | Standard | Cushion |
|---|---|---|---|---|---|---|---|---|---|
MYR 395.10 | 1 Piece(s) | Available | 9 Day(s) or more | 1.1 | 0.01～Less than 0.1 | 0.01 | 10 | Fixed cushion | |
MYR 512.59 | 1 Piece(s) | 4 Day(s) or more | 1.1 | 0.01～Less than 0.1 | 0.04 | 10 | Shock absorber | ||
MYR 440.49 | 1 Piece(s) | Available | 9 Day(s) or more | 2.2 | 0.01～Less than 0.1 | 0.025 | 20 | Fixed cushion | |
MYR 571.10 | 1 Piece(s) | Available | 4 Day(s) or more | 2.2 | 0.1～Less than 1 | 0.12 | 20 | Shock absorber |
Loading...
Basic Information
| Type | Rotary Table 2-points | Main Body Shape | Block shape | Rotating Angle Range | 0 to 190° |
|---|---|---|---|---|---|
| Torque(N･m) | 1~2.87 | Operation Method | Double piston rack and pinion double acting type | Environment, Applications | Standard |
| Rigidity, Accuracy | High rigidity / high precision | Valves | No | Operating Pressure Range(MPa) | 0.15::0.7 |
| Ambient and Working Fluid Temperature(℃) | -20～70 | Pneumatic Fitting Diameter (End face port) | M5X0.8 | Pneumatic Fitting Diameter (Side face port) | M5X0.8 |
Specification/Dimensions
-
Theoretical torque (0.5Mpa)(N・m)
-
Allowable Kinetic Energy(J)
- 0.01～Less than 0.1
- 0.1～Less than 1
-
Allowable Kinetic Energy 2(J)
-
Standard
- 10
- 20
-
Cushion
- Fixed cushion
- Shock absorber
-
type
- HRQ
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Rotary Table, Rack And Pinion Type, MSQ Series (Size 10 And Up)
- Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series
- CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type
- Rotary Cylinder MRQ Series
- Rotary actuator, DRRD Series
- Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series
- Super Fan Rotary SFR Series
- Swivel Actuator Unit, DSL Series
Customers Who Viewed This Item Also Viewed
-
-
Drive equipment oscillation actuator rotary actuator piston type RAT seriesKOGANEI
Standard Price : MYR 1,612.38
Days to Ship : 4 Day(s) or more
-
Small High Rotor / Standard Type, PRNA Series (Single Vane / Double Vane)PARKERKURODA
Standard Price : MYR 745.98-
Days to Ship : 7 Day(s) or more
-
Drive Equipment Swing Actuator Rotary Actuator Piston Type RAP seriesKOGANEI
Standard Price : MYR 867.80-
Days to Ship : 9 Day(s) or more
-
-
Hi-Rotor/Standard, PRN SeriesPARKERKURODA
Standard Price : MYR 1,318.58-
Days to Ship : 7 Day(s) or more
-
-
Rubber Hand For Drive Equipment, Pick TypeKOGANEI
Standard Price : MYR 359.72-
Days to Ship : 4 Day(s) or more
-
Air gripper (parallel opening/closing type) HFZ seriesAIRTAC
Standard Price : MYR 306.82-
Days to Ship : 9 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy