(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here. 

General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

[Features]
·Split mounting type with integrated sensor / amplifier structure.
·Available for insulation measurement.
·Supports +/- 15 V power supply, 0 to +/- 4 V output, available for direction discrimination.
·Capable of continuous measurement from DC to high-frequency up to 20 KHz band (when used at high-frequency, it may not be possible to use this up to the rated current).
·High-speed response within 3 μsec.

PDF

Part Number

Configured Part Number is shown.

Drawing

Drawing 1 of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

 HCS-20-AP-CL

 
Drawing 2 of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

HCS-36-200-AP-CL, HCS-36-500-AP-CL

 
Drawing 3 of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

HCS-36-800-AP-CL

This product always requires +/- 15 V (+15 V and -15 V direct current dual power supply) as a control power supply.
+/- 15 V is required even for current sensing only on the positive side.
In any case, +15 V alone will not work.

Product Specification

TypeHCS-20- (rated current)-AP-CLHCS-36- (rated current)-AP-CL
Rated current (FS)+/- 10 A+/- 20 A+/- 50 A+/- 100 A+/- 150 A+/- 200 A+/- 200 A+/- 500 A+/- 800 A
Maximum Current+/- 25 A+/- 50 A+/- 125 A+/- 250 A+/- 375 A+/- 500 A+/- 500 A+/- 1250 A+/- 2000 A
Output voltage+/- 4 V/rated current,+/- 10 V/maximum current (Recommended load resistance ≥ 10 kΩ)
Residual voltageWithin +/- 100 mV (no load)Within +/- 50 mV (no load)Within +/- 20 mV (no load)
Noise level10 mVp-p or less (no load)
Output accuracyWithin +/- 2%FSWithin +/- 1%FS
LinearityWithin +/- 2%FSWithin +/- 1%FS
Hysteresis (FS to 0)Within +/- 50 mVWithin +/- 25 mVWithin +/- 15 mV
Responsiveness3 μs or less (when di/dt = FS/2 μs)
Output voltage temperature coefficient+/-0.4%/℃ typ+/-0.1%/℃ typ
Residual voltage temperature coefficient+/-4 mV/℃ typ+/-2 mV/℃ typ+/-1 mV/℃ typ+/-0.5 mV/℃ typ+/-0.3 mV/℃ typ
Control power supply+/- 15 V DC+/- 5% (25 mA typ) dual power supply
Withstand voltage2,500 V AC (50/60 Hz), 1 min (Between through hole and batch of output terminals)
Insulation resistance500 V DC, 500MΩ (Between through hole and batch of output terminals)
Usage conditions-10℃ to +60℃, ≤ 85%RH, no condensation.
Storage conditions-15℃ to +65℃, ≤ 85%RH, no condensation.
Adjustment functionFS: Maximum output adjustment, OS: Zero point adjustment at no load (factory adjusted)
Connection connector5045-04 (Molex, LLC)
screw tightening torque0.3 N⋅m0.7 N⋅m
WeightApproximately 55 gApproximately 210 gApproximately 520 g

Ta = 25℃

[Note]
(1) Due to the hysteresis of the core, zero-point fluctuation occurs in proportion to the amount of overcurrent that exceeds the rating.
(2) Since the output may fluctuate due to various factors, the range of actual usage should be 5% or more of the rating.
(3) Do not exceed the maximum current for continuous use
(4) There is a possibility of heating due to core loss in high-frequency and large-current applications.

Technical Information & Design Ideas

Control Block Diagram

Control block diagram of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

Connection Diagram

Connection diagram of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

Performance / Test Information

Output Voltage Characteristics

Output voltage characteristics of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

Frequency Characteristics

Frequency characteristics of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

Output Waveform 1

Output waveform 1 of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply

Output Waveform 2

Output waveform 2 of General-Purpose Direct Current Current Sensor, Split Type, Split Type for Panel-Mount / Compatible With +/- 15 V Power Supply
Part Number
HCS-20-10-AP-CL
HCS-20-20-AP-CL
HCS-20-100-AP-CL
HCS-20-150-AP-CL
HCS-20-200-AP-CL
HCS-36-200-AP-CL
HCS-36-500-AP-CL
HCS-36-800-AP-CL
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipApplicable Current
(A)
Through Hole
(φ)
Width W
(φ)
Height H
(φ)
Width W
(mm)

MYR 615.23

1 Piece(s) 5 Day(s) or more -10~1020535014

MYR 647.82

1 Piece(s) 9 Day(s) or more -20~2020535014

MYR 608.29

1 Piece(s) 9 Day(s) or more -100~10020535014

MYR 608.29

1 Piece(s) 9 Day(s) or more -150~15020535014

MYR 608.29

1 Piece(s) 14 Day(s) or more -200~20020535014

MYR 717.77

1 Piece(s) 9 Day(s) or more -200~20036926920

MYR 717.77

1 Piece(s) 5 Day(s) or more -500~50036926920

MYR 1,202.64

1 Piece(s) 5 Day(s) or more -800~80036926940

Loading...

  1. 1
 

Basic Information

Input Current Direct Current (DC) Mounting Method Panel Mounted Applicable Power Medium · Large

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)