(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Urethane Tube for General Pneumatic Use (high pressure type) U1
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
[Features]
· Can be used in a higher pressure range than U2 tubes.
· Since it uses ether-based polyurethane resin, there is less erosion and deterioration caused by moisture or mold under high temperature and high humidity conditions.
· Coil processing and welding/ heat welding are possible.
Product Specification
Metric size (Group 4)
| Part number | Outer diameter x inner diameter (mm) | Maximum operating pressure (MPa at 20°C) | Minimum bending radius (mm) | ● Weight (g/m) | Standard collar (color symbol) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Black | White | Yellow | Blue | Green | Red | |||||
| BK | WH | YL | BU | GN | RE | |||||
| U1-4-4 × 2.5 | 4 × 2.5 | (Air) 1.2 (water) 0.9 | 10 | 9 | Applicable | Applicable | Applicable | Applicable | Applicable | Applicable |
| U1-4-6 × 4 | 6 × 4 | 15 | 19 | Applicable | Applicable | Applicable | Applicable | Applicable | Applicable | |
| U1-4-8 × 5 | 8 × 5 | 23 | 36 | Applicable | Applicable | Applicable | Applicable | Applicable | Applicable | |
| U1-4-10 x 6.5 | 10 x 6.5 | 30 | 53 | Applicable | - | - | - | - | - | |
| U1-4-12 × 8 | 12 × 8 | 35 | 73 | Applicable | - | - | - | - | - | |
| Operating fluid | Operating temperature range |
|---|---|
| Air | -40 to +80 degrees |
| Water | 0°C to +50°C |
· Standard size: 20 m, 100 m
· Negative pressure performance: -101.294 kPa
Product Feature Details
Relationship Between Operating Temperature and Maximum Operating Pressure
●Note
Use outside the allowable range may cause accidents or premature failure, and Nitta cannot be held responsible in such cases. Please be careful.
Compatible Fittings
(*1) When used in combination with the Chemifit series, the clean type and general type are combined.
When using the product in a clean environment, pay attention to the decrease in clean level.
Cautions and Prohibitions
Usage Precautions
- When using water as a fluid, certain types of additives may cause the tube to deteriorate.
- When using water as a fluid, keep the surge pressure below the maximum operating pressure. Also, make sure it does not freeze.
| Part Number |
|---|
| U1-4-4X2.5-BK-20M |
| U1-4-4X2.5-GN-20M |
| U1-4-6X4-BK-20M |
| U1-4-6X4-BK-100M |
| U1-4-6X4-GN-20M |
| U1-4-8X5-BK-20M |
| U1-4-8X5-GN-20M |
| U1-4-8X5-YL-20M |
| U1-4-10X6.5-BK-20M |
| U1-4-12X8-BK-20M |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | O.D. *O.D. of the outer layer for the two-layer type (Ø) | I.D. (Ø) | Color | Outer Diameter [Category] | I.D. [Category] | Min. Bend Radius (mm) | Length (M) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 101.65 | 1 Piece(s) | Available | 5 Day(s) or more | 4 | 2.5 | Black | Up to 4 | ~3 | 10 | 20 | |
MYR 60.64 | 1 Piece(s) | Available | 12 Day(s) or more | 4 | 2.5 | [Green] Green | Up to 4 | ~3 | 10 | 20 | |
MYR 135.41 | 1 Piece(s) | Available | 5 Day(s) or more | 6 | 4 | Black | Up to 6 | ~4 | 15 | 20 | |
MYR 499.47 | 1 Piece(s) | Available | 8 Day(s) or more | 6 | 4 | Black | Up to 6 | ~4 | 15 | 100 | |
MYR 145.53 | 1 Piece(s) | Available | 8 Day(s) or more | 6 | 4 | [Green] Green | Up to 6 | ~4 | 15 | 20 | |
MYR 245.13 | 1 Piece(s) | Available | 10 Day(s) or more | 8 | 5 | Black | Up to 8 | ~5 | 23 | 20 | |
MYR 208.32 | 1 Piece(s) | Available | 12 Day(s) or more | 8 | 5 | [Green] Green | Up to 8 | ~5 | 23 | 20 | |
MYR 265.38 | 1 Piece(s) | Available | 13 Day(s) or more | 8 | 5 | Yellow | Up to 8 | ~5 | 23 | 20 | |
MYR 334.60 | 1 Piece(s) | Available | 5 Day(s) or more | 10 | 6.5 | Black | Up to 10 | ~7 | 30 | 20 | |
MYR 457.83 | 1 Piece(s) | Available | 5 Day(s) or more | 12 | 8 | Black | Up to 15 | ~8 | 35 | 20 |
Loading...
Basic Information
| Material | Urethane | Applicable Fluid | Water / Air | Type | Straight |
|---|---|---|---|---|---|
| Operating Environment | Standard / Pressure Resistance | Cutting Service Availability | No | Material, Urethane | Ether-based Polyurethane Resin |
| Operating Temperature Range (when using air)(°C) | -40::80 | Operating Pressure Range (when using air)(MPa) | ::1.2 | Maximum operating pressure(MPa) | 1.2 |
Specification/Dimensions
-
O.D. *O.D. of the outer layer for the two-layer type(Ø)
-
I.D.(Ø)
-
Color
- Black
- Yellow
- Green
-
Outer Diameter [Category]
-
I.D. [Category]
-
Length(M)
-
type
- U1
Days to Ship
-
- All
- 5 Day(s) or Less
- 8 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Tubes/Soft Fluororesin Type
- Touch Tube, TE-EP Antistatic Polyurethane Tube
- Cover Tube Spatter Preventing Polyurethane Tube
- FW Tube Outer Layer Cover Detachment Cutter TC
- Junron AT (Nylon Coil Tube), AT1 Coil-Specific Fitting M
- Soft Urethane Tube EA125DC-6
- Zip tie (for tubes)
- Moisture Control Tube, Series IDK
Customers Who Viewed This Item Also Viewed
-
Urethane Tube U2 for General Air PressureNITTA
Standard Price : MYR 12.65-
Days to Ship : 4 Day(s) or more
-
Urethane Tube for General Air Pressure (Ultra Flexible) U5NITTA
Standard Price : MYR 12.01-
Days to Ship : 4 Day(s) or more
-
Nylon Tube Hard (Non-Plastic) Nylon N1NITTA
Standard Price : MYR 42.20-
Days to Ship : 4 Day(s) or more
-
-
-
Polyolefin Resin Tube Clean Pipes (Ultra-Flexible) PNNITTA
Standard Price : MYR 135.41-
Days to Ship : 5 Day(s) or more
-
Straight Polyurethane Tube for Piping in Clean EnvironmentsPISCO
Standard Price : MYR 37.96-
Days to Ship : 1 Day(s) or more
-
Flame-Retardant Tube for Spot Welding Piping FSNITTA
Standard Price : MYR 167.48-
Days to Ship : 7 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy