(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
General-purpose enclosed switches ZE/ZV/ZV2/XE/XV/XV2 (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
Built-in general-purpose basic switch Z.
Side mounting type.
[Features]
· General-purpose seal switch with high durability and large breaking capacity.
· ZE, ZV, ZV2 has built-in general-purpose basic switch Z.
· High durability with large breaking capacity.
· There are 3 mounting methods such as side mounting, bottom mounting and side diagonal mounting method with variety of actuators.
· After removing cover, the terminal of built-in switch is on front surface and hence connection is easy.
· The product with earth terminal supports CE marking.
· Approved by UL, CSA, CCC (ask your manufacturer for information on approved models).
Part Number
Configured Part Number is shown.
Drawing
Plunger type
ZE-Q-2/XE-Q-2
*Stainless steel plunger
*Please refer to the digital catalog for information on part numbers other than those listed above.
Specifications Table
Performance
| Protective structure | IP65 *1 | |
|---|---|---|
| Durability*2 | Mechanical | Type Z□: More than 10 million times Type X□: More than 1 million times |
| Electrical | Type Z□: More than 500,000 times (250 V AC 15 A resistive load) Type X□: More than 100,000 times (125 V DC 10 A resistive load) | |
| Allowable operation speed | Plunger type: 0.01 mm to 0.5 m/s Lever type: 0.02 mm to 0.5 m/s | |
| Allowable operation frequency | Mechanical | 120 times/min |
| Electrical | 20 times/min | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ or more (500 V DC insulation resistance tester) | |
| Contact resistance | 15 mΩ or less (initial value) | |
| Terminal temperature rise | 50 degrees or less | |
| Withstand voltage | Between terminals of the same polarity | 1,000 V AC 50/60 Hz for 1 min |
| Between current-carrying metal parts and ground | Model Z□: 2,000 V AC 50/60 Hz for 1 min Model X□: 1,500 V AC 50/60 Hz for 1 min | |
| Between each terminal and non-current-carrying metal part | Model Z□: 2,000 V AC 50/60 Hz for 1 min Model X□: 1,500 V AC 50/60 Hz for 1 min | |
| Vibration | Malfunction | 10 to 55 Hz double amplitude 1.5 mm *3 |
| Impact*3 | Endurance | Max. 1,000 m/s2 |
| Malfunction | Maximum 100 m/s2 *4 Maximum 50 m/s2 *5 | |
| Operating ambient temperature | -10 to +80°C (no freezing) | |
| Operating Ambient Humidity | Standard type: 35 to 85% RH Sealed type: 35 to 95% RH | |
| Weight | Approx. 260 to 280 g | |
*The values given above are initial values.
*1. Only the □-N type is IP65; the □-Q type is IP60.
*2. The durability values are based on an ambient temperature of 5 to 35°C and an ambient humidity of 40 to 70% RH.
*3. At the total travel position
* 4. Only for plunger type, sealed plunger type, roller arm lever type, and sealed roller arm lever type.
*5. Only for cross roller plunger type, sealed cross roller plunger type, roller plunger type, and sealed roller plunger type.
Product Specification
Structure
In the case of model ZE-NA2-2
Note: The conduit thread indication has been changed from PF1/2 to G1/2 in accordance with the revision of JIS B 0202.
This is only a change in the indication; there are no changes to the thread size, pitch, etc.
Contact model
Note: For part numbers XE, XV, and XV2, always connect COM to the positive terminal.
You can check the external shape diagrams and operation characteristics for each part number here.
Model number display
Model Standard
Z: Single-pole double-throw (alternating current)
X: Single-pole double-throw (direct current)
(2) Installation specifications
E: Side installation type
V: Bottom surface installation type
V2: Side diagonal installation type
Q: Plunger type
Q22: Roller plunger type
Q21: Cross roller plunger type
QA2: Roller arm lever type
QA277: One-way operation roller arm lever type
N: Sealed plunger type
N22: Sealed roller plunger type
(ZE, ZV, ZV2 types only)
N21: Sealed cross roller plunger type
(ZE, ZV, ZV2 types only)
NA2: Sealed roller arm lever type
NA277: One-way operation sealed roller arm lever type
No indication: G1/2 without earth terminal (standard)
G1: G1/2 with earth terminal
G: Pg13.5/with earth terminal
SG1: 1/2-14NPSM/with earth terminal
YG1: M20/with earth terminal
S: 1/2-14NPSM/without earth terminal
Y: M20/without earth terminal
Installation instructions
Technical Information
Rated conditions
| Type | Rated voltage (V) | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistant load | Lamp load | Inductive load | Electric motor load | ||||||
| Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | ||
| Model ZE-□ Model ZV-□ Model ZV2-□ | AC 125 250 480 | 15 15 10 | 3 2.5 1.5 | 1.5 1.25 0.75 | 15 15 6 | 5 3 1.5 | 2.5 1.5 0.75 | ||
| DC 125 250 | 0.5 0.25 | 0.5 0.25 | 0.05 0.03 | 0.05 0.03 | |||||
| Model XE-□ Model XV-□ Model XV2-□ | DC 8 14 30 125 250 | 10 10 10 10 3 | 3 3 3 3 1.5 | 1.5 1.5 1.5 1.5 0.75 | 10 10 10 7.5 2 | 10 10 10 6 1.5 | 5 5 5 2 2 | 2.5 2.5 2.5 2.5 1.5 | |
| Inrush Current | Normally closed | Max. 30 A |
|---|---|---|
| Normally open | Max. 15 A |
*1. The above values indicate a steady-state current.
*2. The inductive load is defined as a power factor of 0.4 or more (alternate current) and a time constant of 7 ms or less (direct current).
*3. A lamp load has an inrush current of 10 times the steady state current.
*4. An electric motor load has an inrush current of 6 times the steady state current.
Electrical durability curve
Usage Examples
Installation
- For roller arm type enclosed switches, the roller arm is temporarily tightened so that it can be set in any position. Please retighten it during installation to prevent loosening during operation.
- To adequately retain the sealing performance of the thread section for installation on the side of the switch, correctly insert the o-ring and tighten the nut.
- To improve sealing performance, we recommend using the SC connector. For details on the SC connector, please refer to the "limit switch connector."
Please arrange the piping so that contaminants and cutting debris do not enter the conduit opening.
Mounting Hole Dimensions
About Proper Tightening Torque
Loose screws may cause early failure, so please tighten each screw to the proper tightening torque.
| No. | Type | Proper tightening torque |
|---|---|---|
| (1) | Cover Mounting Screw | 1.18 to 1.37 N⋅m |
| (2) | main body installation screw *1 | 1.18 to 1.37 N⋅m |
| (3) | Main body installation screw *2 | 4.90–5.88 N⋅m |
| (4) | Switch Terminal Screw (M4) | 0.78 to 1.18 N⋅m |
| (5) | Roller arm tightening nut | 4.90–5.88 N⋅m |
*1. This is the tightening torque for side installation and bottom surface installation types (M4 screw).
*2. This is the tightening torque for side diagonal installation type (M5 hex socket head cap screw).
About the Dedicated Wrench
(1) By loosening the nut, you can set the roller arm to any position at 225° as shown below.
(2) By loosening the nut, you can set the roller arm fixing bracket to any position within 360°.
- When loosening the nut, please be careful to prevent contaminants from entering.
- A dedicated wrench is available separately for setting to any desired position.
Cautions and Prohibitions
Operating Environment
- In outdoor environments or environments with special cutting oil, solvents, or chemicals, the seal part components may deteriorate. Be sure to evaluate under actual usage conditions and set the maintenance and replacement intervals accordingly.
- To maintain the performance of the machine's mechanical durability, when using in locations exposed to oil or water, make sure that grease does not run out in section (A). The use of molybdenum disulfide-based grease is recommended.
- Install the switch in a position where it is not directly exposed to machining chips or dust. The actuator and switch main body must also be protected from the accumulation of cutting chips and muddy material.
- If the switch is continuously subjected to vibration or shock, it may cause contact failures at the contact points due to the generation of wear particles, malfunctions, reduced durability, etc. Excessive vibration or impact may cause malfunction or damage to the contacts, so be sure to install the product in a position where it will not be subjected to vibration or impact, or in a direction that will not cause resonance.
- The switch has a contact point, and if silicon gas is present in the atmosphere, silicon oxide (SiO2) may be deposited on the contacts due to arc energy, causing a contact failure. If silicone products such as silicone oil, silicone filler, or silicone cables are present around the switch, suppress arcing with a contact protection circuit or remove the source of the silicon gas.
Operation
- The operation method, the shape of the cam or dog, frequency, and movement after operation all have a significant impact on durability and accuracy. Therefore, make sure the cam has a smooth shape.
- Allow a margin for the movement after operation (OT).
Set it to 70 to 100% of the OT standard value when using.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detector Shape | Plunger Shape Type | Boot Seal | Lever Shape Type | Acquired Standards | Protection Structure | Force Required for Push Side O.F. (N) | Contact Type | Mechanical Life (10,000 times) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Detector Element Details | Conduit Size | Specification of Terminal | Mounting System | Built-in Switch Specification | AC Rated Voltage | DC Rated Voltage | Actuator Format | Earth Terminal Specification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 208.08 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | Presence | - | CE / GB(CCC) | IP65 | 10.2 | Single Pole Double Throw | 100 | 25.4 | 86 | 44.5 | Sealed plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Plunger type | Without earth terminal | ||
MYR 178.94 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | CE / GB(CCC) | IP65 | 7.26 | Single Pole Double Throw | 100 | 25.4 | 86 | 44.5 | Sealed roller arm lever type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Lever type | Without earth terminal | ||
MYR 208.08 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | CE / GB(CCC) | IP60 | 5 | Single Pole Double Throw | 100 | 25.4 | 86 | 44.5 | Cross roller plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Plunger type | Without earth terminal | ||
MYR 167.35 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | CE / GB(CCC) | IP60 | 5 | Single Pole Double Throw | 100 | 25.4 | 86 | 44.5 | Roller plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Plunger type | Without earth terminal | ||
MYR 195.75 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | No | - | CE / GB(CCC) | IP60 | 5 | Single Pole Double Throw | 100 | 25.4 | 86 | 44.5 | Plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Plunger type | Without earth terminal | ||
MYR 167.35 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | - | [Arm Lever] Roller, Arm Lever | CE / GB(CCC) | IP60 | 6.47 | Single Pole Double Throw | 100 | 25.4 | 86 | 44.5 | Roller arm lever type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Lever type | Without earth terminal | ||
MYR 159.93 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | - | - | [Arm Lever] Roller, Arm Lever | - | IP60 | 6.47 | Single Pole Double Throw | 100 | 25.4 | 86 | 44.5 | Roller arm lever type | G1/2 | Ground terminal not included | Side diagonal mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Lever type | Without earth terminal | ||
MYR 235.31 | 1 Piece(s) | 5 Day(s) or more | Roller lever type | - | - | [Arm Lever] Roller, Arm Lever | CE / GB(CCC) | IP65 | - | - | 100 | - | - | - | Sealed roller arm lever type | G1/2 | Ground terminal not included | Bottom mounting type | Single pole double throw (direct current) | - | 8 / 125 / 250 / 30 / 14 | Lever type | Without earth terminal | ||
MYR 235.31 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | - | - | - | IP65 | - | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 213.01 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed cross roller plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 143.81 | 1 Piece(s) | 8 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed cross roller plunger type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 220.33 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 229.76 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / CE / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller plunger type | Pg13.5 | Ground terminal included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | With earth terminal | ||
MYR 202.90 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller plunger type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 156.73 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 7.85 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 166.06 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | Presence | - | UL / C-UL / CE / GB(CCC) / CSA | IP65 | 7.85 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed plunger type | Pg13.5 | Ground terminal included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | With earth terminal | ||
MYR 140.45 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 7.85 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed plunger type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 178.15 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP65 | 6.28 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller arm lever type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 169.00 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | UL / C-UL / CE / GB(CCC) / CSA | IP65 | 6.28 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller arm lever type | Pg13.5 | Ground terminal included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | With earth terminal | ||
MYR 201.60 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP65 | 6.28 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller arm lever type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 182.80 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP65 | 6.28 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | One-way operation sealed roller arm lever type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 172.65 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | - | - | UL / C-UL / GB(CCC) / CSA | IP65 | - | - | 1000 | - | - | - | Sealed plunger type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 124.08 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Cross roller plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 165.65 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | - | - | UL / C-UL / CE / GB(CCC) / CSA | IP60 | - | - | 1000 | - | - | - | Cross roller plunger type | Pg13.5 | Ground terminal included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | With earth terminal | ||
MYR 176.78 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Cross roller plunger type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 157.06 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 135.02 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | UL / C-UL / CE / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller plunger type | Pg13.5 | Ground terminal included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | With earth terminal | ||
MYR 137.37 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller plunger type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 142.08 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Plunger type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 126.47 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | No | - | UL / C-UL / CE / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Plunger type | Pg13.5 | Ground terminal included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | With earth terminal | ||
MYR 109.00 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Plunger type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 124.08 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | - | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP60 | 5.59 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller arm lever type | G1/2 | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 170.21 | 1 Piece(s) | 5 Day(s) or more | Roller lever type | - | - | [Arm Lever] Roller, Arm Lever | UL / C-UL / CE / GB(CCC) / CSA | IP60 | - | - | 1000 | - | - | - | Roller arm lever type | Pg13.5 | Ground terminal included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | With earth terminal | ||
MYR 171.53 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | - | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP60 | 5.59 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller arm lever type | 1/2-14NPSM | Ground terminal not included | Side mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 229.58 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller plunger type | G1/2 | Ground terminal not included | Side diagonal mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 230.43 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller plunger type | 1/2-14NPSM | Ground terminal not included | Side diagonal mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 122.50 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 7.85 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed plunger type | G1/2 | Ground terminal not included | Side diagonal mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 165.33 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | - | - | UL / C-UL / CE / GB(CCC) / CSA | IP65 | - | - | 1000 | - | - | - | Sealed plunger type | Pg13.5 | Ground terminal included | Side diagonal mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | With earth terminal | ||
MYR 162.13 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP65 | 6.28 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller arm lever type | G1/2 | Ground terminal not included | Side diagonal mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 159.11 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller plunger type | G1/2 | Ground terminal not included | Side diagonal mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 241.08 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 4.9 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller plunger type | G1/2 | Ground terminal not included | Bottom mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 170.93 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Push Plunger | Presence | - | UL / C-UL / GB(CCC) / CSA | IP65 | 7.85 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed plunger type | G1/2 | Ground terminal not included | Bottom mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 149.54 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP65 | 6.28 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller arm lever type | G1/2 | Ground terminal not included | Bottom mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 148.70 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | Presence | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP65 | 6.28 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Sealed roller arm lever type | 1/2-14NPSM | Ground terminal not included | Bottom mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal | ||
MYR 170.93 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | [Roller Plungers] Roller Plunger | No | - | UL / C-UL / GB(CCC) / CSA | IP60 | 2.45~3.43 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller plunger type | G1/2 | Ground terminal not included | Bottom mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Plunger type | Without earth terminal | ||
MYR 170.93 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | - | [Arm Lever] Roller, Arm Lever | UL / C-UL / GB(CCC) / CSA | IP60 | 5.59 | Single Pole Double Throw | 1000 | 25.4 | 86 | 44.5 | Roller arm lever type | G1/2 | Ground terminal not included | Bottom mounting type | Single pole double throw (AC) | 480 / 250 / 125 | 125 / 250 | Lever type | Without earth terminal |
Loading...
Basic Information
| Main Body Size | Standard | Environment | Standard | Operating Temperature Range(°C) | -10::80 |
|---|---|---|---|---|---|
| Mechanical Operation Frequency(times/min or Less) | 120 | Type | Limit switch |
Specification/Dimensions
-
Detector Shape
- Plunger Type
- Roller Lever Type (rotation)
- Lever Shape (push)
- Roller lever type
-
Plunger Shape Type
- Roller Plungers
- Push Plunger
- Roller Plungers
-
Boot Seal
- No
- Presence
-
Lever Shape Type
- Arm Lever
- Arm Lever
-
Force Required for Push Side O.F.(N)
-
Contact Type
- Single Pole Double Throw
-
Detector Element Details
- Cross roller plunger type
- One-way operation sealed roller arm lever type
- Plunger type
- Roller arm lever type
- Roller plunger type
- Sealed cross roller plunger type
- Sealed plunger type
- Sealed roller arm lever type
- Sealed roller plunger type
-
Conduit Size
-
Specification of Terminal
-
Mounting System
-
Built-in Switch Specification
- Single pole double throw (AC)
- Single pole double throw (direct current)
-
AC Rated Voltage
- 480 / 250 / 125
-
DC Rated Voltage
-
Actuator Format
- Lever type
- Plunger type
-
Earth Terminal Specification
- With earth terminal
- Without earth terminal
-
type
- XE
- XV
- XV2
- ZE
- ZV
- ZV2
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Tactile Switch D5B
- Compact Enclosed Switch [SHL]
- Two-Circuit Limit Switch [WL-N/WL]
- Compact Insertion Switch
- Slim Type Safety / Door Switch [D4GS-N]
- Small Safety Door Switch / Slide Key Unit [D4NS/D4NS-SK]
- Safety Limit Switch [D4B-*N]
- Microswitch, S-3-BE-SW Series
Customers Who Viewed This Item Also Viewed
![Small Safety Limit Switch [D4F]](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/221005138035/OMR1_221005138035_20230801115837.jpg?$product_recommend_b$)
![Safety Limit Switch [D4B-*N]](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/221005138091/OMR1_221005138091_1_20230801115837.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy