Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Tactile Switch D5B (D5B-8023)

Click this image to zoom it.

Move the mouse over the image to zoom

For detecting object from multiple directions

[Features]
· Multi-application tactile switch to detect the object from multiple direction.
· Slow actions switch structure
· Contact with metallic plating and high contact reliability due to micro load.
· Direct input to microcomputer and programmable controller is possible.
· Three type of M5, M8, M10 with small outer diameter.
· Panel fitting system with easy fitting

Part Number

Configured Part Number is shown.

D5B-8023

Product Specifications
Part Numbers
Catalog

Drawing

M5 Type

D5B-501*

D5B-502*

D5B-551*

M8 Type

D5B-801*

D5B-802*

D5B-851*

M10 Type

D5B-101*

D5B-151*

D5B-102*

D5B-153*

*1. The dimensional tolerance for the parts not specified in the dimensions of each model above is +/- 0.4 mm.
Note 2. The thread section of the case has a special thread dimension (pitch 0.5 mm). Installation using standard tapping is not possible, so please use the included nut for installation.

Product Specification

Rating / Performance

Electric Rating		5 V DC 1 mA to 30 V DC 30 mA (resistive load)
Protective structure		IP67
Durability *1	Mechanical	More than 10 million times
Durability *1	Electrical	More than 5 million times (30 V DC 30 mA resistive load)
Allowable operation speed		5 to 500 mm/s
Allowable operation frequency	Mechanical	120 times/min
Allowable operation frequency	Electrical	60 times/min
Insulation resistance		Between each terminal and non-charged metal part: 100 MΩ (in 250 V DC mega)
Contact resistance		With 1 m cable: 700 mΩ or less (initial value) With 3 m cable: 1.9 Ω or less (initial value) With 5 m cable: 3.1 Ω or less (initial value)
Withstand voltage (50/60 Hz 1 min)	Between terminals of the same polarity	250 V AC (at TTP)
Withstand voltage (50/60 Hz 1 min)	Between each terminal and non-current-carrying metal part	AC 1,000 V (600 V for M5 type)
Vibration	Malfunction	10 to 55 Hz double amplitude 1.5 mm *2
Impact	Endurance	Max. 1,000 m/s²
Impact	Malfunction	Max. 300 m/s² *3
Operating ambient temperature		-10 to +70°C (no freezing)
Operating ambient humidity		35 to 95% RH
Actuator strength		14.7 N *4
Weight	switch main body	approx. 14 g (M5), approx. 20 g (M8), approx. 21 g (M10)
Weight	Cable	approx. 10 g/m

*The values given above are initial values.
*1. The durability values are based on an ambient temperature of +5 to +35°C and an ambient humidity of 40 to 70% RH.
*2. For Wye spring type: 16.7 Hz, double amplitude 1 mm
*3. For Wye spring type: Max. 50 m/s²
*4. Excluding Wye spring type.

Operating characteristics

*This is a reference value.

Selection Support Information

Model Standard

Cautions and Prohibitions

Precautions for use

Handling

Do not apply excessive load to the cord. (29.42N or less)
Applying more may cause the cord to break.
When repeatedly bending the cord, ensure the bending radius is at least R20mm.
As the Wye spring type has a thin end, please be careful during handling.

Installation

Do not tighten the nut with excessive force. Please refer to the table below for tightening torque and mounting hole dimension.
The thread section of the base has special thread dimensions, so installation with standard tapping is not possible.

Type	Tightening torque (maximum)
M5	0.98 N⋅m
M8	2.94 N⋅m
M10	3.92 N⋅m

Dimension/Type	M5	M8	M10
A (installation hole dimension)	⌀5 0 to +0.3 mm	⌀8 0 to +0.3 mm	⌀10 0 to +0.3 mm
B (Plate thickness)	3-7 mm	4-6 mm	6-10 mm
C (toothed washer external dimensions)	⌀9.2 mm	⌀15 mm	⌀18 mm

· Applying excessive load to the base can cause deformation. Please handle the installation with utmost care.

Operation

Do not subject the actuator to excessive force. The strength of the actuator is a maximum of 14.7 N, but for repeated operation, limit it to a maximum of 1.96 N (for Wye spring type, a maximum of 0.49 N).
The operation characteristics vary depending on the direction of force (X, Y, Z).
The tactile switch operates by having the actuator move in response to force applied to the end, which opens and closes the internal switch through its mechanism. This operates on a different principle from switches that are activated simply by touching the actuator (such as the NL limit type touch switch and the D5C cylindrical touch switch).
If the stroke is excessive on the Wye spring type, it may cause breakage. Please limit the overall movement (TT) to the reference value.
When using in locations where oil, water, or similar substances may come into direct contact with the switch, please attach a protective cover (protective cover is not available for sale).
When used outdoors, malfunctions may occur due to ozone degradation and other factors. In addition, differences in the operating environment may affect durability.

: 30; 45; 60

Part Number
D5B-8023

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Detector Shape	Plunger Shape Type	Boot Seal	Rod Shape Type	Force Required for Push Side O.F. (N)	Motion to Switching P.T. (mm)	Max. Stroke T.T (mm)	Main Body External Dimension, Length L (mm)	Measuring element shape	Mounting Screw Nominal M	Indicator Light	Specification of Terminal	Cord / Cable Length (m)	Details Type	O.D.	Antenna	Contact format
	MYR 171.21	1 Piece(s)		5 Day(s) or more	Plunger Type	[Top Plunger] Cone Plunger	No	-	0.98	0.3	0.9	32.5	Cone	M8 x 0.5 (Fine)	Cone Plunger Shape (Resin Plunger) R0.8	M8 Connector Type	3	Resin plunger	M8X0.5	-	NC only, NO contact specifications not included

Product TOP

Basic Information

Main Body Size	Small	Environment	Standard	Operating Temperature Range(°C)	-10::70
Protection Structure	IP67	Contact Type	Mutual insulation double-throw	Mechanical Life(10,000 times)	1000
Mechanical Operation Frequency(times/min or Less)	120	Rated Operating Voltage(V)	DC30V or Less	Rated Conductance Current(A)	0.03
Detector Element Details	Oil Resistant Cord φ3 0.08mm2 2-Core	Direction of Operation	Slow action	Actuator Format	1
Type	1

Please check the type/dimensions/specifications of the part D5B-8023 in the Tactile Switch D5B series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Rod Shape Type
- Spring + Metal Rod
  - Stainless Steel Wire
  - Wire, Springs (Long Springs)
  - Wire, Springs (Short Springs)
Clear
Antenna
- Presence
Clear
type
- D5B
Clear
Detector Shape
- Plunger Type
- Rod Shape
Clear
Plunger Shape Type
- Top Plunger
  - Cone Plunger
  - Hemisphere Plunger
Clear
Boot Seal
- No
Clear
Force Required for Push Side O.F.(N)
0.05

0.74

0.98

1.47
Clear
Measuring element shape
- Cone
- Wire spring
- Hemisphere
Clear
Mounting Screw Nominal M
- M5 x 0.5 (Fine)
- M10 x 0.5 (Fine)
- M8 x 0.5 (Fine)
Clear
Indicator Light
- Wire spring type stainless steel wire, φ0.4
- Cone Plunger Shape (Resin Plunger) R0.5
- Wire spring type stainless steel wire, φ0.6
- Cone Plunger Shape (Resin Plunger) R0.8
- Cone Plunger Shape (Resin Plunger) R0.9
- Hemisphere Plunger Shape (Resin Plunger) R2.15
- Hemisphere Plunger Shape (Resin Plunger) R3.5
- Hemisphere Plunger Shape (Resin Plunger) R4.5
Clear
Specification of Terminal
M5 Connector Type

M8 Connector Type

M10 Connector Type
Clear
Cord / Cable Length(m)
- 1
- 3
- 5
Clear
Details Type
- Long spring
- Resin plunger
- Short spring
- Tactile (touch) switch, resin plunger
Clear
O.D.
- M5X0.5
- M8X0.5
- M10X0.5
Clear
Contact format
- 1b (NC only, NO specification not included)
- NC only, NO contact specifications not included
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

2 Day(s) or Less

5 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
D5B-1021
D5B-1023
D5B-1025
D5B-8511
D5B-8513
D5B-8515

Standard Unit Price	Minimum order quantity	Days to Ship	Detector Shape	Plunger Shape Type	Boot Seal	Rod Shape Type	Force Required for Push Side O.F. (N)	Motion to Switching P.T. (mm)	Max. Stroke T.T (mm)	Main Body External Dimension, Length L (mm)	Measuring element shape	Mounting Screw Nominal M	Indicator Light	Specification of Terminal	Cord / Cable Length (m)	Details Type	O.D.	Antenna	Contact format
MYR 101.47	1 Piece(s)	5 Day(s) or more	Plunger Type	[Top Plunger] Cone Plunger	-	-	1.47	0.3	1.0	39.3	Cone	M10 x 0.5 (Fine)	Cone Plunger Shape (Resin Plunger) R0.9	M10 Connector Type	1	Resin plunger	M10X0.5	-	NC only, NO contact specifications not included
MYR 191.00	1 Piece(s)	5 Day(s) or more	Plunger Type	[Top Plunger] Cone Plunger	No	-	1.47	0.3	1.0	39.3	Cone	M10 x 0.5 (Fine)	Cone Plunger Shape (Resin Plunger) R0.9	M10 Connector Type	3	Tactile (touch) switch, resin plunger	M10X0.5	-	1b (NC only, NO specification not included)
MYR 143.88	1 Piece(s)	5 Day(s) or more	Plunger Type	[Top Plunger] Cone Plunger	-	-	0.98	0.3	0.9	32.5	Cone	M10 x 0.5 (Fine)	Cone Plunger Shape (Resin Plunger) R0.8	M8 Connector Type	5	Resin plunger	M8X0.5	-	NC only, NO contact specifications not included
MYR 159.62	1 Piece(s)	5 Day(s) or more	Rod Shape	-	-	[Spring + Metal Rod] Wire, Springs (Short Springs)	0.05	11	23	92.8	Wire spring	M8 x 0.5 (Fine)	Wire spring type stainless steel wire, φ0.6	M8 Connector Type	1	Short spring	M8X0.5	Presence	NC only, NO contact specifications not included
MYR 178.94	1 Piece(s)	5 Day(s) or more	Rod Shape	-	-	[Spring + Metal Rod] Wire, Springs (Short Springs)	0.05	11	23	92.8	Wire spring	M8 x 0.5 (Fine)	Wire spring type stainless steel wire, φ0.6	M8 Connector Type	3	Short spring	M8X0.5	Presence	NC only, NO contact specifications not included
MYR 194.46	1 Piece(s)	2 Day(s) or more	Rod Shape	-	-	[Spring + Metal Rod] Wire, Springs (Short Springs)	0.05	11	23	92.8	Wire spring	M8 x 0.5 (Fine)	Wire spring type stainless steel wire, φ0.6	M8 Connector Type	5	Short spring	M8X0.5	Presence	NC only, NO contact specifications not included

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Small Limit Switch [D4C]
OMRON

Standard Price : MYR 87.67-

Days to Ship : 1 Day(s) or more
Small Limit Switch [HL-5000]
OMRON

Standard Price : MYR 139.53-

Days to Ship : 2 Day(s) or more
Small Safety Limit Switch [D4N]
OMRON

Standard Price : MYR 58.27-

Days to Ship : 2 Day(s) or more
CS-Touch Switch CS/CSJ/CSS/CSK/CSP
METROL

Standard Price : MYR 160.53-

Days to Ship : 1 Day(s) or more
Small Limit Switch [D4CC]
OMRON

Standard Price : MYR 177.20-

Days to Ship : 2 Day(s) or more
Contact Switches/Spring Plunger/IP40
MISUMI

Standard Price : MYR 149.28-

Days to Ship : 2 Day(s) or more
Ultra Small Size High-Precision PT-Touch Switch PT
METROL

Standard Price : MYR 240.21-

Days to Ship : 2 Day(s) or more
Compact Sealed Switch [ZC-*55]
OMRON

Standard Price : MYR 90.03-

Days to Ship : 2 Day(s) or more
Semi-Compact Sealed Switch [D4MC]
OMRON

Standard Price : MYR 49.76-

Days to Ship : 2 Day(s) or more
Plunger Switches/Ball Plunger/IP40
MISUMI

Standard Price : MYR 150.71-

Days to Ship : 2 Day(s) or more
Compact Enclosed Switch [SHL]
OMRON

Standard Price : MYR 86.17-

Days to Ship : 1 Day(s) or more
CS-Touch Switch for Deflection CSH
METROL

Standard Price : MYR 277.57-

Days to Ship : 2 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Tactile Switch D5B (D5B-8023)

Drawing

M5 Type

M8 Type

M10 Type

Product Specification

Rating / Performance

Operating characteristics

Selection Support Information

Model Standard

Cautions and Prohibitions

Precautions for use

Basic Information

Configure

Specification/Dimensions

Rod Shape Type

Antenna

type

Detector Shape

Plunger Shape Type

Boot Seal

Force Required for Push Side O.F.(N)

Measuring element shape

Mounting Screw Nominal M

Indicator Light

Specification of Terminal

Cord / Cable Length(m)

Details Type

O.D.

Contact format

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm