Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Small Limit Switch [D4C] (D4C-3201)

Click this image to zoom it.

Move the mouse over the image to zoom

Compact limit switch excelling in compact size, thin and high seal properties.
[Features]
· Approved by EN (TÜV), UL, CSA, CCC standard. (ask your manufacturer for information on approved models)
· High sealing property compliant with IEC Standard IP67.
· The plunger has a seal packing, a diaphragm and the built-in switch has a protective cap and a triple seal structure.
· 3 m and 5 m cords are used as a standard. Series with cords certified by UL and CSA standards.
· Plunger type enables multiple mountings.
· A series of LED indicator lights (red) is made to facilitate confirmation during operation. (Lights up when not operating as a standard)
· VCTF oil-resistant cord type and pre-wired type products confirm with CE marking. (However this is applicable to the Standard type only)

(i)Caution

The product images are representative only. Specifications may vary by part number, including shape and color.

Part Number

Configured Part Number is shown.

D4C-3201

Product Specifications
Part Numbers
Catalog

Drawing

D4C-**01

Product Specification

Performance

Protective Structure		IP67
Durability*1	Mechanical*3	More than 10 million times
Durability*1	Electrical*2	More than 200,000 times (125 V AC 5 A resistant load)
Allowable operation speed		0.1 mm to 0.5 m/s (for plunger type) 1 mm to 1 m/s (for roller lever type)
Allowable operation frequency	Mechanical	120 times/min
Allowable operation frequency	Electrical	30 times/min
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ or more (500 V DC insulation resistance tester)
Contact resistance (initial value)		250 mΩ or less (with a 2 m cord) 300 mΩ or less (with a 3 m cord) 400 mΩ or less (with a 5 m cord)
Withstand voltage	Between terminals of the same polarity	1,000 V AC 50/60 Hz for 1 min
	Between current-carrying metal parts and ground	1,500 V AC 50/60 Hz for 1 min Uimp 2.5 kV (EN60947-5-1)
	Between each terminal and non-current-carrying metal part	1,500 V AC 50/60 Hz for 1 min Uimp 2.5 kV (EN60947-5-1)
Rated insulation voltage (Ui)		300 V (EN60947-5-1) *5
Pollution degree (operating environment)		3 (EN60947-5-1)
Short circuit protection device		10 A fuse gI or gG (IEC60269)
Conditional short circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (I the)		5 A, 4 A, 0.5 A (EN60947-5-1)
Appliance Class		Class I (with ground wire) *6
Vibration	Malfunction	10 to 55 Hz double amplitude 1.5 mm *4
Impact resistant	Endurance	Max. 1,000 m/s²
Impact resistant	Malfunction	Max. 500 m/s² *4
Operating ambient temperature		-10 to +70℃ (no freezing)
Operating ambient humidity		35 to 95% RH
Weight (D4C-1202)		Approximately 360 g (with 3 m VCTF) Approximately 540 g (with 5 m VCTF)

*The values given above are initial values.
* 1. The durability values are based on an ambient temperature of 5 to 35℃ and an ambient humidity of 40 to 70% RH, but durability varies depending on the type of load and magnitude of current.
*2. More than 1 million times for pre-wired type. (DC specification switching current 0.1 A)
* 3. More than 500,000 times for weather resistance type.
* 4.Excluding plastic rod type.
* 5. 250 V for pre-wired type.
* 6. class III for pre-wired type

Structure

Small limit switch D4C structural drawing

: 30; 45; 60

Part Number
D4C-3201

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Detector Shape	Environment	Plunger Shape Type	Boot Seal	Roller Lever Shape Type	Rod Shape Type	Operating Temperature Range (°C)	Acquired Standards	Protection Structure	Force Required for Push Side O.F. (N)	Motion to Switching P.T. (mm)	Angle to Switching P.T (deg)	Max. Stroke T.T (mm)	Max. Angle T.T (deg)	Contact Type	Mechanical Life (10,000 times)	Mechanical Operation Frequency (times/min or Less)	Rated Operating Voltage (V)	Rated Conductance Current (A)	Main Body External Dimension, Width W (mm)	Main Body External Dimension, Height H (mm)	Main Body External Dimension, Length L (mm)	Lever Length R (mm)	Cable Specifications	Detector Element Details	Indicator Light	Movement After the Operation OT (mm)	Operating Position OP (mm)	Specification of Terminal	Cord / Cable Length (m)	Details Type	O.D.	Mounting System	Roller Type	Contact format	Wiring Specifications	AC Rated Voltage	DC Rated Voltage	AC Electrical Rating details	DC Electrical Rating details	Electrical Rating	Note
	MYR 194.46	1 Piece(s)		5 Day(s) or more	Plunger Type	Standard	Push Plunger	No	-	-	-10～70	TUV / EN	IP67	11.77	1.8	-	4.8	-	Single Pole Double Throw	1000	120	DC30V or Less	4	40	17.4	49	-	VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)	Pin plunger type	LED With indicator light	3	15.7	Ground terminal included	3	Stainless Steel Plunger	φ10	Front mounting	-	1c	VCTF oil resistance cord	-	30	-	30 V DC (4 A)	-	-

Product TOP

Basic Information

Main Body Size	Small

Please check the type/dimensions/specifications of the part D4C-3201 in the Small Limit Switch [D4C] series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Roller Lever Shape Type
- Standard
- Variable Roller Levers
- Center Roller Lever
  - Center roller lever
Clear
Rod Shape Type
- Spring + Resin Rod
  - Plastic Rod
Clear
Roller Type
- Stainless Steel Roller
- Stainless steel-based sintered roller
Clear
AC Rated Voltage
- 125
- 250
Clear
AC Electrical Rating details
- 125 V AC (0.1 A)
- 125 V AC (5 A)
- 250 V AC (5 A)
Clear
Electrical Rating
- DC30V 4A
- AC125V 0.1A / DC30V 0.1A
- AC250V 5A / DC30V 4A
Clear
type
- D4C
Clear
Detector Shape
- Plunger Type
- Roller Lever Type (rotation)
- Lever Shape (push)
- Rod Shape
- Others
  - Flexible type
- Roller lever type
Clear
Environment
- Standard
- Weather Resistance
Clear
Plunger Shape Type
- Roller Plungers
  - Roller Plunger
- Push Plunger
Clear
Boot Seal
- No
- Presence
Clear
Force Required for Push Side O.F.(N)
1.47

5.69

6.67

11.77

17.65
Clear
Contact Type
- Single Pole Double Throw
Clear
Rated Operating Voltage(V)
- DC30V or Less
- AC100/125V
- AC120/240V
- AC240/250V
Clear
Rated Conductance Current(A)
0.1

0.1 A at 125 VAC, 0.1 A at 30 VDC

4

4 A 30 VDC (with LED indicator)

5

5 A at 250 VAC, 4 A at 30 VDC
Clear
Cable Specifications
- SJT(O)3m(0.75mm2 4 Core 7.6mm Finishing External Diameter)
- VCTF3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
- VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
- SJT(O)5m(0.75mm2 4 Core 7.6mm Finishing External Diameter)
- VCTF5m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
- VCTF Oil Resistance Code 5m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
Clear
Detector Element Details
- Center roller lever type
- Cross roller plunger type
- Pin plunger type
- Plastic Rod
- Plastic rod type
- Roller lever type
- Roller lever type (high sensitivity type)
- Roller plunger type
- Sealed cross roller type
- Sealed pin plunger type
- Sealed roller plunger type
- Variable rod lever type
- Variable roller lever
- Variable roller lever type
Clear
Indicator Light
- LED With indicator light
- No indicator light
Clear
Movement After the Operation OT(mm)
3
Clear
Operating Position OP(mm)
- 15.7
- 24.9
- 28.5
- 28.5±1
- 34.3
Clear
Specification of Terminal
Ground terminal (general load type) included

Ground terminal (micro-load type) included

Ground terminal included
Clear
Cord / Cable Length(m)
- 0.3
- 3
- 5
Clear
Details Type
- Environmental resistant type
- General type
- Head only parts set type (with actuator)
- Head single unit (roller / plunger type with actuator)
- Nylon rod
- Pre-wired type
- Stainless Steel Lever
- Stainless Steel Plunger
- Standard type
- Weather resistance type
Clear
O.D.
- φ3 × 160
- φ3.2
- φ10
- φ12×4.4
- φ17.5×7
- Stainless steel
Clear
Mounting System
Front mounting
Clear
Contact format
- 1c
Clear
Wiring Specifications
- ASI device compatible connector type (2 cores: no wiring)
- Pre-wired type (3 cores: DC specification)
- SJT (O)
- VCTF
- VCTF oil resistance cord
Clear
DC Rated Voltage
30
Clear
DC Electrical Rating details
- 30 V DC (0.1 A)
- 30 V DC (1 A)
- 30 V DC (4 A)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

1 Day(s) or Less

2 Day(s) or Less

5 Day(s) or Less

9 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
D4C-0032
D4C-0050
D4C-0060
D4C-3202
D4C-3203
D4C-3220

Standard Unit Price	Minimum order quantity	Days to Ship	Detector Shape	Environment	Plunger Shape Type	Boot Seal	Roller Lever Shape Type	Rod Shape Type	Operating Temperature Range (°C)	Acquired Standards	Protection Structure	Force Required for Push Side O.F. (N)	Motion to Switching P.T. (mm)	Angle to Switching P.T (deg)	Max. Stroke T.T (mm)	Max. Angle T.T (deg)	Contact Type	Mechanical Life (10,000 times)	Mechanical Operation Frequency (times/min or Less)	Rated Operating Voltage (V)	Rated Conductance Current (A)	Main Body External Dimension, Width W (mm)	Main Body External Dimension, Height H (mm)	Main Body External Dimension, Length L (mm)	Lever Length R (mm)	Cable Specifications	Detector Element Details	Indicator Light	Movement After the Operation OT (mm)	Operating Position OP (mm)	Specification of Terminal	Cord / Cable Length (m)	Details Type	O.D.	Mounting System	Roller Type	Contact format	Wiring Specifications	AC Rated Voltage	DC Rated Voltage	AC Electrical Rating details	DC Electrical Rating details	Electrical Rating	Note
MYR 104.11	1 Piece(s)	5 Day(s) or more	-	Standard	[Roller Plungers] Roller Plunger	-	-	-	-10～70	-	IP67	-	-	-	-	-	-	1000	120	-	-	-	-	-	-	-	Sealed roller plunger type	-	-	-	-	-	Head only parts set type (with actuator)	-	-	-	-	-	-	-	-	-	-	-
MYR 138.87	1 Piece(s)	5 Day(s) or more	Rod Shape	Standard	-	-	-	[Spring + Resin Rod] Plastic Rod	-10～70	EN / TUV	IP67	1.47	-	15	-	-	Single Pole Double Throw	1000	120	-	-	40	17.4	49	-	-	Plastic rod type	No indicator light	-	-	Ground terminal (general load type) included	-	Nylon rod	φ3.2	Front mounting	-	1c	-	-	-	-	-	-	-
MYR 99.15	1 Piece(s)	5 Day(s) or more	-	Standard	-	-	-	-	-10～70	-	IP67	-	-	-	-	-	-	1000	120	-	-	-	-	-	-	-	Center roller lever type	-	-	-	-	-	Head only parts set type (with actuator)	-	-	-	-	-	-	-	-	-	-	-
MYR 213.77	1 Piece(s)	2 Day(s) or more	Plunger Type	Standard	[Roller Plungers] Roller Plunger	No	-	-	-10～70	EN / TUV	IP67	11.77	1.8	-	4.8	-	Single Pole Double Throw	1000	120	DC30V or Less	4	40	17.4	67	-	VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)	Roller plunger type	LED With indicator light	3	28.5	Ground terminal included	3	-	φ12×4.4	Front mounting	Stainless steel-based sintered roller	1c	VCTF oil resistance cord	-	30	-	30 V DC (4 A)	-	-
MYR 213.77	1 Piece(s)	5 Day(s) or more	Plunger Type	Standard	[Roller Plungers] Roller Plunger	No	-	-	-10～70	EN / TUV	IP67	11.77	1.8	-	4.8	-	Single Pole Double Throw	1000	120	DC30V or Less	4	40	17.4	67	-	VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)	Cross roller plunger type	LED With indicator light	3	28.5	Ground terminal included	3	-	φ12×4.4	Front mounting	Stainless Steel Roller	1c	VCTF oil resistance cord	-	30	-	30 V DC (4 A)	-	-
MYR 225.36	1 Piece(s)	5 Day(s) or more	Roller Lever Type (rotation)	Standard	-	-	Standard	-	-10～70	EN / TUV	IP67	5.69	-	25	-	65	Single Pole Double Throw	1000	120	DC30V or Less	4	40	17.4	65	38	VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)	Roller lever type	LED With indicator light	-	-	Ground terminal included	3	-	φ17.5×7	Front mounting	Stainless steel-based sintered roller	1c	VCTF oil resistance cord	-	30	-	30 V DC (4 A)	-	-

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Small Limit Switch [D4CC]
OMRON

Standard Price : MYR 177.20-

Days to Ship : 2 Day(s) or more
Two-Circuit Limit Switch [WL-N/WL]
OMRON

Standard Price : MYR 7.16-

Days to Ship : 2 Day(s) or more
Small Limit Switch [HL-5000]
OMRON

Standard Price : MYR 139.53-

Days to Ship : 2 Day(s) or more
Compact Sealed Switch [ZC-*55]
OMRON

Standard Price : MYR 90.03-

Days to Ship : 2 Day(s) or more
Small Safety Limit Switch [D4N]
OMRON

Standard Price : MYR 58.27-

Days to Ship : 2 Day(s) or more
Small Safety Limit Switch [D4F]
OMRON

Standard Price : MYR 240.48-

Days to Ship : 2 Day(s) or more
Tactile Switch D5B
OMRON

Standard Price : MYR 101.47-

Days to Ship : 2 Day(s) or more
General-purpose Basic Switch Z
OMRON

Standard Price : MYR 32.02-

Days to Ship : 1 Day(s) or more
Safety Limit Switch [D4B-*N]
OMRON

Standard Price : MYR 221.50-

Days to Ship : 1 Day(s) or more
Compact Enclosed Switch [SHL]
OMRON

Standard Price : MYR 86.17-

Days to Ship : 1 Day(s) or more
Semi-Compact Sealed Switch [D4MC]
OMRON

Standard Price : MYR 49.76-

Days to Ship : 2 Day(s) or more
Small Enclosed Switch [D4E-*N]
OMRON

Standard Price : MYR 90.74-

Days to Ship : 2 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Small Limit Switch [D4C] (D4C-3201)

(i)Caution

Drawing

D4C-**01

Product Specification

Performance

Structure

Basic Information

Configure

Specification/Dimensions

Roller Lever Shape Type

Rod Shape Type

Roller Type

AC Rated Voltage

AC Electrical Rating details

Electrical Rating

type

Detector Shape

Environment

Plunger Shape Type

Boot Seal

Force Required for Push Side O.F.(N)

Contact Type

Rated Operating Voltage(V)

Rated Conductance Current(A)

Cable Specifications

Detector Element Details

Indicator Light

Movement After the Operation OT(mm)

Operating Position OP(mm)

Specification of Terminal

Cord / Cable Length(m)

Details Type

O.D.

Mounting System

Contact format

Wiring Specifications

DC Rated Voltage

DC Electrical Rating details

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm