(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Compact heavy equipment limit switch with improved seal, impact-resistance and load-resistance.
[Features]
· Double sealing structure of the rotary shaft has been further reinforced and the gasket full cover system, etc., ensures sealing.
· Models with fluoroelastomer available separately for effective resistance to chemicals.
· A block mount method is adopted to minimize time loss during maintenance.
· Four circuit double-break models available for complex operations.
Part Number
Configured Part Number is shown.

*The dimensional tolerance for the parts not specified in the drawings of each model above is +/- 0.4 mm.
| Protective Structure (compliant) | IP67, NEMA standards 1, 2, 3, 4, 4X, 5, 6P, 12, 13 | |
|---|---|---|
| Durability*2 | Mechanical*1 | More than 50 million times (for 2-circuit double-break rotating Lever Type) More than 30 million times (for 4-circuit double-break rotating lever type) |
| Electrical | More than 1 million times (2-circuit double-break type: 125 V AC 10 A with a resistant load) More than 750,000 times (4-circuit double-break type: 125 V AC 5 A with a resistant load) | |
| Allowable operation speed | 1 mm to 2 m/s (D4A-3101N, rotating lever type) | |
| Allowable operation frequency | Mechanical | 300 times/min |
| Electrical | 30 times/min | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | Between same-pole terminals, between current-carrying metal parts and ground, between each terminal and non-current-carrying metal parts 100 MΩ or more (500 V DC insulation resistance tester) | |
| Contact resistance | 25 mΩ or less (initial value) | |
| Temperature rise | 50 degrees or less | |
| Withstand voltage | Between terminals of the same polarity | 1,000 V AC 50/60 Hz for 1 min |
| Between current-carrying metal parts and ground | 2,200 V AC 50/60 Hz 1 min*3 | |
| Between each terminal and non-current-carrying metal part | 2,200 V AC 50/60 Hz 1 min*3 | |
| Pollution degree (operating environment) | 3 | |
| Appliance Class | Class I (with earth terminal) | |
| Vibration | Malfunction*4 | 10 to 55 Hz double amplitude 1.5 mm |
| Impact | Endurance | Max. 1,000 m/s2 |
| Malfunction*4 | Max. 600 m/s² 2-circuit double-break rotating lever type Max. 300 m/s² 4-circuit double-break rotating lever type | |
| Operating ambient humidity | 35 to 95%RH (no freezing) | |
| Weight | Approximately 290 g (D4A-3101N rotating lever type) | |
*The values given above are initial values.
* 1. Excluding holding type.
* 2. The durability values are based on an ambient temperature of 5 to 35℃ and an ambient humidity of 40 to 70% RH, but durability varies depending on the type of load and the magnitude of the current.
* 3. 1,500 V AC for models with an indicator light.
* 4. Excluding flexible rod type (cat whisker type, plastic rod type, coil spring type, spring wire type).
| Items | Type | ||
|---|---|---|---|
| Rotating lever type*1 | Plunger type, flexible rod type*2 | With indicator light | |
| Operating ambient temperature | -40 to +100°C | -20 to +100°C | -10 to +80°C |
* 1. Excluding light operating type and high-sensitivity light operating type.
* 2. Including rotating lever type light operating type and high-sensitivity light operating type.

*The values in the parentheses are average values.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detector Shape | Environment | Plunger Shape Type | Boot Seal | Roller Lever Shape Type | Rod Shape Type | Operating Temperature Range (°C) | Acquired Standards | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Angle to Switching P.T (deg) | Contact Type | Mechanical Life (10,000 times) | Rated Operating Voltage (V) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Lever Length R (mm) | Detector Element Details | Indicator Light | Movement After the Operation OT (mm) | Operating Position OP (mm) | Torque necessary for operation, OF (N·m) | Conduit Size | Details Type | O.D. | Mounting System | Direction of Operation | Roller Type | Contact format | AC Rated Voltage | DC Rated Voltage | Switch Box |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 318.20 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard | - | - | - | - | -10~80 | - | 0.39 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | With indicator light (LED) | - | - | 0.39 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 482.98 | 1 Piece(s) | 5 Day(s) or more | Roller lever type | Standard | - | - | - | - | -10~80 | UL / GB(CCC) / CSA | - | - | - | 2-circuit Double-break | 5000 | - | - | - | - | - | - | Rotating lever type (shaft only) | With indicator light (LED) | - | - | - | G1/2 conduit | Holding type | - | - | - | - | - | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 425.20 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard | - | - | - | [Spring + Metal Rod] Coil Spring | -10~80 | UL / GB(CCC) / CSA | - | - | - | 2-circuit Double-break | 5000 | - | - | - | - | - | - | Flexible rod type | With indicator light (LED) | - | - | - | G1/2 conduit | Coil spring type | - | - | - | - | - | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 466.00 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard | - | - | - | - | -10~80 | - | 0.39 | - | 15 | 4-circuit Double-break | 3000 | AC100/125V | 5 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | With indicator light (LED) | - | - | 0.39 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | - | 125 / 250 | 12 / 24 / 48 | 4-circuit double-break type, simultaneous operation | ||
MYR 260.00 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 226.29 | 1 Piece(s) | 35 Day(s) or more | Lever Shape (push) | Standard / Cold Resistance | - | No | Standard | - | -10~120 | - | 0.39 | - | 15 | Single Pole Double Throw | 5000 | DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No indicator light | - | - | - | 1/2-14NPT conduit | General standard type, weather-resistant type | - | - | - | - | 1a1b | 480 / 250 / 125 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 320.00 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 7 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 404.30 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 65 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 348.38 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard / Cold Resistance | Push Plunger | No | - | - | -20~100 | UL / GB(CCC) / CSA | 17.65 | 1.6 | - | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | - | Top plunger type | No | 5.1 | 46±0.8 | - | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | Stainless Steel Plunger | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 357.00 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard / Cold Resistance | [Roller Plungers] Roller Plunger | No | - | - | -20~100 | UL / GB(CCC) / CSA | 17.65 | 1.6 | - | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | - | Top plunger type | No | 5.1 | 56±0.8 | - | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | Stainless Steel Roller | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 412.38 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | No | - | - | -20~100 | UL / GB(CCC) / CSA | 17.65 | 1.6 | - | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | - | Top plunger type | No | 5.1 | 55.5-62 | - | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 322.00 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard | - | - | Spring・Rod・Lever | [Spring + Metal Rod] Wire, Springs | -20~100 | UL / GB(CCC) / CSA | 0.98 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | 287 | Flexible rod type | No | - | - | - | 1/2-14NPT conduit | Stainless steel wire rod | φ1.8 | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 324.00 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard | - | - | - | [Spring + Resin Rod] Plastic Rod | -20~100 | UL / GB(CCC) / CSA | 1.47 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | 106.5 | Flexible rod type | No | - | - | - | 1/2-14NPT conduit | Plastic Rod | φ7 | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 301.00 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard | - | - | - | Coil-spring (whole spring) | -20~100 | UL / GB(CCC) / CSA | 1.47 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | 106.5 | Flexible rod type | No | - | - | - | 1/2-14NPT conduit | Stainless steel coil spring | φ6.5 | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 427.53 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 15 | 4-circuit Double-break | 3000 | AC100/125V | 5 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | - | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | - | 2a2b | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type, simultaneous operation | ||
MYR 371.55 | 1 Piece(s) | 35 Day(s) or more | Roller Lever Type (rotation) | Standard / Cold Resistance | - | No | Standard | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 15 | 2-circuit Double-break | 3000 | DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V | 5 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | - | 1/2-14NPT conduit | Adjustable type (chemical resistance) | - | Front / rear mounting | Snap Action | - | 2a2b | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type, simultaneous operation | ||
MYR 419.00 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 19 | 4-circuit Double-break | 3000 | AC100/125V | 5 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | 1/2-14NPT conduit | - | - | Front / rear mounting | Snap Action | - | 2a2b | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type | ||
MYR 256.33 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 370.13 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 7 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 323.70 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -20~100 | UL / GB(CCC) / CSA | 0.2 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.2 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 318.20 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard / Cold Resistance | [Roller Plungers] Roller Plunger | No | - | - | -20~100 | UL / GB(CCC) / CSA | 19.61 | 2.4 | - | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 101.6 | - | Side plunger | No | 5.1 | 44±0.8 | - | G1/2 conduit | - | φ11×5 | Front / rear mounting | Snap Action | Stainless Steel Roller | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 346.75 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | - | - | - | -20~100 | UL / GB(CCC) / CSA | - | - | - | 2-circuit Double-break | 5000 | - | - | - | - | - | - | Top plunger type | No | - | - | - | G1/2 conduit | Standard type | - | - | - | - | - | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 318.20 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard / Cold Resistance | [Roller Plungers] Roller Plunger | No | - | - | -20~100 | UL / GB(CCC) / CSA | 17.65 | 1.6 | - | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | - | Top plunger type | No | 5.1 | 56±0.8 | - | G1/2 conduit | - | φ11×5 | Front / rear mounting | Snap Action | Stainless Steel Roller | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 348.38 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard / Cold Resistance | - | - | Spring・Rod・Lever | [Spring + Metal Rod] Wire, Springs | -20~100 | UL / GB(CCC) / CSA | 0.98 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | 287 | Flexible rod type | No | - | - | - | G1/2 conduit | Stainless steel wire rod | φ1.8 | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 279.51 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard / Cold Resistance | - | - | - | [Spring + Resin Rod] Plastic Rod | -20~100 | UL / GB(CCC) / CSA | 1.47 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | 106.5 | Flexible rod type | No | - | - | - | G1/2 conduit | Plastic Rod | φ7 | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 346.75 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard | - | - | - | - | -20~100 | UL / GB(CCC) / CSA | - | - | - | 2-circuit Double-break | 5000 | - | - | - | - | - | - | Flexible rod type | No | - | - | - | G1/2 conduit | Cat whisker type | - | - | - | - | - | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 279.51 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard / Cold Resistance | - | - | - | Coil-spring (whole spring) | -20~100 | UL / GB(CCC) / CSA | 1.47 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 97.5 | 106.5 | Flexible rod type | No | - | - | - | G1/2 conduit | Stainless steel coil spring | φ6.5 | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 298.89 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -10~80 | UL / GB(CCC) / CSA | 0.39 | - | 15 | 2-circuit Double-break | 5000 | More than AC300V | 10 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | With indicator light (neon lamp) | - | - | 0.39 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | 1a1b | 125 / 250 / 480 / 600 | 8 / 14 / 30 / 125 / 250 | 2-circuit double-break type | ||
MYR 333.65 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 15 | 4-circuit Double-break | 3000 | AC100/125V | 5 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | 2a2b | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type, simultaneous operation | ||
MYR 449.93 | 1 Piece(s) | 5 Day(s) or more | Roller lever type | Standard | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | - | - | - | 4-circuit Double-break | 3000 | - | - | - | - | - | - | Rotating lever type (shaft only) | No | - | - | - | G1/2 conduit | High sensitivity type | - | - | - | - | - | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type, simultaneous operation | ||
MYR 395.59 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard / Cold Resistance | [Roller Plungers] Roller Plunger | No | - | - | -20~100 | UL / GB(CCC) / CSA | 17.65 | 1.6 | - | 4-circuit Double-break | 3000 | AC100/125V | 5 | 42 | 44 | 97.5 | - | Top plunger type | No | 5.1 | 56±0.8 | - | G1/2 conduit | - | φ11×5 | Front / rear mounting | Snap Action | Stainless Steel Roller | 2a2b | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type, simultaneous operation | ||
MYR 441.70 | 1 Piece(s) | 5 Day(s) or more | Rod Shape | Standard | - | - | - | [Spring + Metal Rod] Coil Spring | -20~100 | UL / GB(CCC) / CSA | - | - | - | 4-circuit Double-break | 3000 | - | - | - | - | - | - | Flexible rod type | No | - | - | - | G1/2 conduit | Coil spring type | - | - | - | - | - | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type, simultaneous operation | ||
MYR 445.83 | 1 Piece(s) | 5 Day(s) or more | Roller lever type | Standard | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | - | - | - | 4-circuit Double-break | 3000 | - | - | - | - | - | - | Rotating lever type (shaft only) | No | - | - | - | G1/2 conduit | Sequential operation type | - | - | - | - | - | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type | ||
MYR 356.90 | 1 Piece(s) | 5 Day(s) or more | Rotating lever type (shaft only) | Standard / Cold Resistance | - | - | - | - | -40~100 | UL / GB(CCC) / CSA | 0.39 | - | 19 | 4-circuit Double-break | 3000 | AC100/125V | 5 | 42 | 44 | 104.5 | - | Rotating lever type (shaft only) | No | - | - | 0.39 | G1/2 conduit | - | - | Front / rear mounting | Snap Action | - | 2a2b | 125 / 250 / 480 / 600 | 14 / 30 / 125 / 250 | 4-circuit double-break type |
Loading...
| Main Body Size | Small | Protection Structure | IP67 | Mechanical Operation Frequency(times/min or Less) | 300 |
|---|
![Safety Limit Switch [D4B-*N]](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/221005138091/OMR1_221005138091_1_20230801115837.jpg?$product_recommend_b$)
![Multi-Pull Limit Switch [VB]](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/221000559363/221000559363_20210409115436.jpg?$product_recommend_b$)
![Option for Compact Heavy Equipment Limit Switch [D4A-N]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559600.jpg?$product_recommend_b$)
OMRON
Standard Price : MYR 44.75-
Days to Ship : 2 Day(s) or more
![Small Limit Switch [HL-5000]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559453_001.jpg?$product_recommend_b$)
![Small Enclosed Switch [D4E-*N]](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/221000559262/OMR1_221000559262_20230801115836.jpg?$product_recommend_b$)
![Single Parts for 2-Circuit Limit Switch [WL-N/WL]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559677.jpg?$product_recommend_b$)
OMRON
Standard Price : MYR 69.00-
Days to Ship : 5 Day(s) or more

OMRON
Standard Price : MYR 198.32
Days to Ship : 5 Day(s) or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy