Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Air-Driven Planeveyor Lifter PVL-S Series, Straight Type (PVL55S-10)

Planeveyor that allows 360° free-direction movement and positioning.
[Features]
· A wide variety of variations support rust-proof, dust-proof, heat resistant, sound damping, and other requirements.
· A labor-saving device with a built-in air cylinder that lifts the conveyed object off of the table surface, allowing it to be moved and positioned freely through 360 degrees.
· A conveyed object weighing 1 ton can be moved with a starting frictional resistance of around 20 kgf.
· Lightweight and rust-resistant due to aluminum body.
· Accommodates various workpiece weights, sizes, and installation groove widths with a diverse product lineup.
[Applications]
· Ideal for situations where you need to move heavy objects such as molds or jigs, which are usually stationary, for setup changes or position adjustments, and when movement is only required occasionally.

(i)Caution

The product images are representative only. Specifications may vary by part number, including shape and color.

Part Number

Configured Part Number is shown.

PVL55S-10

Product Specifications
Part Numbers
Catalog

Supports a wide variety of options for rust prevention, dust-proof, heat resistant, sound damping, and more

External appearance of PVL17S-*

Dimensional drawing of PVL17S-*

Model	Drive Orientation Capability / Upward Force *Recommended Operating Pressure Range 0.4 MPa to 0.6 MPa (Pressure Resistance 0.9 MPa)				Main Ball	Support Cup	Main body	Use Direction
Model	Supplied Air Pressure	0.4 MPa	0.5 MPa	0.6 MPa	Main Ball	Support Cup	Main body	Use Direction
PVL17S-*	1 Piston	176 N (18 kgf)	216 N (22 kgf)	255 N (26 kgf)	SUJ2	SCM415	Aluminum	Upward/Downward

External appearance of PVL30S-*

Dimensional drawing of PVL30S-*

Model	Drive Orientation Capability / Upward Force *Recommended Operating Pressure Range 0.4 MPa to 0.6 MPa (Pressure Resistance 0.9 MPa)				Main Ball	Support Cup	Main body	Use Direction
Model	Supplied Air Pressure	0.4 MPa	0.5 MPa	0.6 MPa	Main Ball	Support Cup	Main body	Use Direction
PVL30S-*	1 Piston	294 N (30 kgf)	382 N (39 kgf)	470 N (48 kgf)	SUJ2	SCM415	Aluminum	Upward/Downward

External appearance of PVL55S-*

Dimensional drawing of PVL55S-*

Model	Drive Orientation Capability / Upward Force *Recommended Operating Pressure Range 0.4 MPa to 0.6 MPa (Pressure Resistance 0.9 MPa)				Main Ball	Support Cup	Main body	Use Direction
Model	Supplied Air Pressure	0.4 MPa	0.5 MPa	0.6 MPa	Main Ball	Support Cup	Main body	Use Direction
PVL55S-*	1 Piston	549 N (56 kgf)	676 N (69 kgf)	804 N (82 kgf)	SUJ2	SCM415	Aluminum	Upward/Downward

External appearance of PVL30SL-*-P50

Dimensional drawing of PVL30SL-*-P50

Model	Drive Orientation Capability / Upward Force *Recommended Operating Pressure Range 0.4 MPa to 0.6 MPa (Pressure Resistance 0.9 MPa)				Main Ball	Support Cup	Main body	Use Direction
Model	Supplied Air Pressure	0.4 MPa	0.5 MPa	0.6 MPa	Main Ball	Support Cup	Main body	Use Direction
PVL30SL-*-P50	1 Piston	294 N (30 kgf)	382 N (39 kgf)	470 N (48 kgf)	SUJ2	SCM415	Aluminum	Upward/Downward

External appearance of PVL55SL-*

Dimensional drawing of PVL55SL-*

Model	Drive Orientation Capability / Upward Force *Recommended Operating Pressure Range 0.4 MPa to 0.6 MPa (Pressure Resistance 0.9 MPa)				Main Ball	Support Cup	Main body	Use Direction
Model	Supplied Air Pressure	0.4 MPa	0.5 MPa	0.6 MPa	Main Ball	Support Cup	Main body	Use Direction
PVL55SL-*	1 Piston	549 N (56 kgf)	676 N (69 kgf)	804 N (82 kgf)	SUJ2	SCM415	Aluminum	Upward/Downward

External appearance of PVL55SW-*

Dimensional drawing of PVL55SW-*

Model	Drive Orientation Capability / Upward Force *Recommended Operating Pressure Range 0.4 MPa to 0.6 MPa (Pressure Resistance 0.9 MPa)				Main Ball	Support Cup	Main body	Use Direction
Model	Supplied Air Pressure	0.4 MPa	0.5 MPa	0.6 MPa	Main Ball	Support Cup	Main body	Use Direction
PVL55SW-*	1 Piston	1,098 N (112 kgf)	1,352 N (138 kgf)	1,608 N (164 kgf)	SUJ2	SCM415	Aluminum	Upward/Downward

External appearance of PVL55SH-*

Dimensional drawing of PVL55SH-*

Model	Drive Orientation Capability / Upward Force *Recommended Operating Pressure Range 0.4 MPa to 0.6 MPa (Pressure Resistance 0.9 MPa)				Main Ball	Support Cup	Main body	Use Direction
Model	Supplied Air Pressure	0.4 MPa	0.5 MPa	0.6 MPa	Main Ball	Support Cup	Main body	Use Direction
PVL55SH-*	1 Piston	549 N (56 kgf)	676 N (69 kgf)	804 N (82 kgf)	SUJ2	SCM415	Aluminum	Upward

Usage Example

Usage Example 1: Positioning of Molds, Jigs, etc.

By using the PVL-S for positioning heavy objects or molds, you can easily move the workpiece by floating the planeveyor with the power of air.

Advantages of Improving the Work Environment with Planeveyor Lifters

Transporting heavy objects such as molds is not only dangerous but also requires a great deal of effort.
By installing the planeveyor lifter under heavy objects and switching the air ON/OFF, the objects can be raised or lowered, allowing for accurate positioning and transport operations in a short time with fewer people.
Compared to hydraulic lifters, no specialized knowledge, equipment, or piping work is required, allowing for safe operation.
The planeveyor lifter streamlines logistics and transport, reduces labor, improves safety across various industries, and even achieves overall cost reduction.
With simple installation work, mold replacement and mold set up can be performed quickly and safely.

What is an Air-Driven Planeveyor Lifter?

This is a labor-saving device that is mainly inserted into the bolster groove of a press machine, uses the power of air to lift the planeveyor, and pushes the mold up from the bolster, making it possible to perform mold positioning with minimal force (starting frictional resistance of 3/100 or less).
After positioning, turning off the air allows the planeveyor to flush under the weight of the die, seating it on the bolster.

By using the air-driven planeveyor lifter, mold changes that previously took a significant amount of time can now be performed smoothly. It can be easily integrated with hydraulic clamp units and telescopic slide rails, and compared to conventional hydraulic rollers, it offers greater flexibility in moving molds and is more resistant to damage. The main body is available in square groove and T groove types, and dimensional modifications are also possible.

By using the air-driven planeveyor lifter, die replacement—which previously required a significant amount of time—can now be performed smoothly.
It can be easily integrated with hydraulic clamp units and telescopic slide rails, and compared to standard hydraulic rollers, it offers greater flexibility in moving molds and is more resistant to breakage.
The main body shape is available in square groove and T-groove types, and dimension changes can also be accommodated.

Recommended Circuit Diagram

Workpieces are lifted using air pressure and lowered using their own weight.
The air in the cylinder must therefore be released when lowering, so please use a three-way valve.
If you need to force the cylinder to lower, please use a vacuum generator as shown in the diagram at the lower right.

Planeveyor Selection Method

For the PVL-S series straight type, please select a planeveyor lifter based on the following guideline:
"workpiece weight ≤ lifting capacity of one piston x number of planeveyors under the bottom of the workpiece".

*The lifting capacity is a measured value.

Customer Feedback

After installing the PVL-S on the pressed machine, the die replacement time was reduced, and it was especially effective for machines with frequent setup changes.

Behind the Scenes

The PVL series is the only product in the industry that can be used for both upward and downward applications. The original spherical structure allows heavy workpieces to be moved more easily.

: 30; 45; 60

Part Number
PVL55S-10

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Load Capacity (N)	Load Capacity Range (N)	Ball Dia. (Ø)	Use Direction	Full length L (mm)	Number of Ball Rollers (piece)	Load Capacity of Ball Roller (per Roller, at 0.5 MPa) (N)
	MYR 3,551.48	1 Piece(s)		27 Day(s) or more	-	6760	5000.1~10000	25.4	For Both Upward and Downward Use	538	10	676

Product TOP

Basic Information

Shape	Unit	Type	Air Drive Type	Body Material	Aluminum
Large Ball Material	SUJ2	Details of Main Body Material[receiving the ball]	SCM415	Small Ball (Internal Ball) Material	SUJ2

Please check the type/dimensions/specifications of the part PVL55S-10 in the Air-Driven Planeveyor Lifter PVL-S Series, Straight Type series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- PVL-S
Clear
Load Capacity(N)
1080

1296

1512

1728

1910

1944

2160

2292

2376

2592

2674

2800

3024

3056

3240

3380

3438

3672

3820

4056

4104

4202

4536

4584

4732

4966

5348

5408

5730

6084

6760

7436

8112

8788

9464

10140

14872
Clear
Load Capacity Range(N)
- 500.1~5000
- 5000.1~10000
- 10000.1~20000
Clear
Use Direction
- For Both Upward and Downward Use
- Upward
Clear
Full length L(mm)
180

210

240

270

280

288

290

300

330

338

340

350

360

388

390

400

420

438

440

450

480

488

490

500

520

538

540

550

560

588

590

600

638

640

650

660

688

690

700

738

740

750

788

790

800
Clear
Number of Ball Rollers(piece)
5

6

7

8

9

10

11

12

13

14

15

17

19

21
Clear
Load Capacity of Ball Roller (per Roller, at 0.5 MPa)(N)
- 216
- 382
- 676
- 1352
Clear
CAD
- 2D
Clear

Days to Ship

All

9 Day(s) or Less

15 Day(s) or Less

21 Day(s) or Less

27 Day(s) or Less

30 Day(s) or Less

35 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
PVL17S-13
PVL17S-14
PVL17S-15
PVL55S-11
PVL55S-12
PVL55S-13

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Load Capacity (N)	Load Capacity Range (N)	Ball Dia. (Ø)	Use Direction	Full length L (mm)	Number of Ball Rollers (piece)	Load Capacity of Ball Roller (per Roller, at 0.5 MPa) (N)
MYR 3,327.73	1 Piece(s)	21 Day(s) or more	10	2800	500.1~5000	15.875	For Both Upward and Downward Use	420	13	216
MYR 3,437.41	1 Piece(s)	21 Day(s) or more	10	3024	500.1~5000	15.875	For Both Upward and Downward Use	450	14	216
MYR 3,545.40	1 Piece(s)	21 Day(s) or more	10	3240	500.1~5000	15.875	For Both Upward and Downward Use	480	15	216
MYR 3,798.92	1 Piece(s)	27 Day(s) or more	-	7436	5000.1~10000	25.4	For Both Upward and Downward Use	588	11	676
MYR 4,046.94	1 Piece(s)	27 Day(s) or more	-	8112	5000.1~10000	25.4	For Both Upward and Downward Use	638	12	676
MYR 4,374.02	1 Piece(s)	27 Day(s) or more	-	8788	5000.1~10000	25.4	For Both Upward and Downward Use	688	13	676

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Ball Roller Units/Hex Head/Stud/Press-Fit Type
MISUMI

Standard Price : MYR 306.71-

Days to Ship : 2 Day(s) or more
Plain Bearing Unit PVU, PVUH, and PVUX Series
ATEC

Standard Price : MYR 352.99-

Days to Ship : 7 Day(s) or more
Planeveyor PV Series, Press-Molded Product
ATEC

Standard Price : MYR 14.58-

Days to Ship : 1 Day(s) or more
Plain pair PV-BH/PVS-B series Refuse outlet bolt type
ATEC

Standard Price : MYR 160.40-

Days to Ship : 4 Day(s) or more
Air driven planeveyor lifter PVL-T series T groove insertion type
ATEC

Standard Price : MYR 2,881.75-

Days to Ship : 35 Day(s) or more
Planeveyor PV-B Series Bolt Type Cut Parts
ATEC

Standard Price : MYR 56.07-

Days to Ship : 4 Day(s) or more
Plain bear PV-C/CF Series spring cushion type
ATEC

Standard Price : MYR 273.84-

Days to Ship : 4 Day(s) or more
Planeveyor PV-H Series (With Garbage Ejection) Press Molded Product/Cutting Product
ATEC

Standard Price : MYR 34.54-

Days to Ship : 4 Day(s) or more
ISR-C38 Air Ball Lifter
IGUCHI KIKO

Standard Price : MYR 14,081.74

Days to Ship : 11 Day(s) or more
Freebear Unit Table, Freebear Table
FREEBEAR

Standard Price : MYR 2,793.51-

Days to Ship : 7 Day(s) or more
Freebear EX Series
FREEBEAR

Standard Price : MYR 141.87-

Days to Ship : 4 Day(s) or more
Plain bear PV-FH/PVS-F Series refuse discharge flange type
ATEC

Standard Price : MYR 438.23-

Days to Ship : 4 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Air-Driven Planeveyor Lifter PVL-S Series, Straight Type (PVL55S-10)

(i)Caution

Supports a wide variety of options for rust prevention, dust-proof, heat resistant, sound damping, and more

Usage Example

Usage Example 1: Positioning of Molds, Jigs, etc.

Advantages of Improving the Work Environment with Planeveyor Lifters

What is an Air-Driven Planeveyor Lifter?

Recommended Circuit Diagram

Planeveyor Selection Method

Customer Feedback

Behind the Scenes

Basic Information

Configure

Specification/Dimensions

type

Load Capacity(N)

Load Capacity Range(N)

Use Direction

Full length L(mm)

Number of Ball Rollers(piece)

Load Capacity of Ball Roller (per Roller, at 0.5 MPa)(N)

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm