Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Single block] Full-ball type LM guide, world standard HSR model

Volume Discount

This is a single block from the THK LM guide HSR series. Very convenient for sudden design changes or maintenance.

[Features]
· The balls roll along four rows of precisely ground raceways on the LM rail and LM block, and the end plate built into the LM block circulates the rows of balls.
· Even if the LM rail is removed, the balls are retained by the retaining plate and will not fall out (except for HSR8, 10, and 12 types).
· Each ball row is arranged at a contact angle of 45° so that the LM block has the same rated load in all four directions (radial, reverse radial, and lateral directions), making it suitable for use in any orientation. In addition, a well-balanced preload can be applied, allowing you to increase rigidity in all four directions while maintaining a consistently low coefficient of friction. With a low cross section height and a LM block designed for high stiffness, you can achieve highly accurate and stable linear motion.

(i)Caution

The product images are representative only. Specifications may vary by part number, including shape and color.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Drawing

HSR-C type, HSR-CM type, HSR-LC type, HSR-LCM type, HSR-XC type, HSR-XLC type

HSR-RM type

HSR8, 10RM type

HSR12RM type

HSR-R type, HSR-RM type, HSR-LR type, HSR-LRM type

HSR-YR Type, HSR-YRM Type

HSR-HA Type, HSR-HB Type, HSR-HR Type

[Block Only] Full-ball type LM guide World Standard HSR Series HSR-HA, HSR-HB, HSR-HR External Shape Drawings

HSR100 to 150HA Type

HSR100 to 150HB Type

HSR100 to 150HR Type

Specifications Table

HSR-C type, HSR-CM type, HSR-LC type, HSR-LCM type, HSR-XC type, HSR-XLC type

Nominal model number	External dimensions			LM block Dimensions
Nominal model number	Height M	Width W	Length L	B	C	Mounting hole S	H	L₁	t	T	T₁	K	N	E	Grease Nipple
HSR 15C HSR 15CM	24	47	56.6	38	30	M5	4.5	38.8	11	7	7	19.3	4.3	5.5	PB1021B
HSR 15LC HSR 15LCM	24	47	74.6	38	30	M5	4.5	56.8	11	7	7	19.3	4.3	5.5	PB1021B
HSR 20C HSR 20CM	30	63	74	53	40	M6	5.4	50.8	10	9.5	10	26	5	12	B-M6F
HSR 20LC HSR 20LCM	30	63	90	53	40	M6	5.4	66.8	10	9.5	10	26	5	12	B-M6F
HSR 25C HSR 25CM	36	70	83.1	57	45	M8	6.8	59.5	16	11	10	30.5	6	12	B-M6F
HSR 25LC HSR 25LCM	36	70	102.2	57	45	M8	6.8	78.6	16	11	10	30.5	6	12	B-M6F
HSR 30C HSR 30CM	42	90	98	72	52	M10	8.5	70.4	18	9	10	35	7	12	B-M6F
HSR 30LC HSR 30LCM	42	90	120.6	72	52	M10	8.5	93	18	9	10	35	7	12	B-M6F
HSR 35C HSR 35CM	48	100	109.4	82	62	M10	8.5	80.4	21	12	13	40.5	8	12	B-M6F
HSR 35LC HSR 35LCM	48	100	134.8	82	62	M10	8.5	105.8	21	12	13	40.5	8	12	B-M6F
HSR 45C HSR 45LC	60	120	139 170.8	100	80	M12	10.5	98 129.8	25	13	15	50	10	16	B-PT 1/8
HSR 55C HSR 55LC	70	140	163 201.1	116	95	M14	12.5	118 156.1	29	13.5	17	57	11	16	B-PT 1/8
HSR 65XC HSR 65XLC	90	170	190.5 250	142	110	M16	14.5	138.5 198	37	21.5	23	76	19	16	B-PT 1/8

HSR-RM type

Nominal model number	External dimensions			LM block Dimensions
Nominal model number	Height M	Width W	Length L	B	C	S x L	L₁	T	K	N	E	Lubrication Hole d	Grease Nipple
HSR 8RM	11	16	24	10	10	M2 × 2.5	15	-	8.9	2.6	-	2.2	-
HSR 10RM	13	20	31	13	12	M2.6 × 2.5	20.1	-	10.8	3.5	-	2.5	-
HSR 12RM	20	27	45	15	15	M4 x 4.5	30.5	6	16.9	5.2	4	-	PB107

HSR-R type, HSR-RM type, HSR-LR type, HSR-LRM type

Nominal model number	External dimensions			LM block Dimensions
Nominal model number	Height M	Width W	Length L	B	C	S x L	L₁	T	K	N	E	Grease Nipple
HSR 15R HSR 15RM	28	34	56.6	26	26	M4 × 5	38.8	6	23.3	8.3	5.5	PB1021B
HSR 15LR HSR 15LRM	28	34	74.6	26	34	M4 × 5	56.8	6	23.3	8.3	5.5	PB1021B
HSR 20R HSR 20RM	30	44	74	32	36	M5 × 6	50.8	8	26	5	12	B-M6F
HSR 20LR HSR 20LRM	30	44	90	32	50	M5 × 6	66.8	8	26	5	12	B-M6F
HSR 25R HSR 25RM	40	48	83.1	35	35	M6 × 8	59.5	9	34.5	10	12	B-M6F
HSR 25LR HSR 25LRM	40	48	102.2	35	50	M6 × 8	78.6	9	34.5	10	12	B-M6F
HSR 30R HSR 30RM	45	60	98	40	40	M8 × 10	70.4	9	38	10	12	B-M6F
HSR 30LR HSR 30LRM	45	60	120.6	40	60	M8 × 10	93	9	38	10	12	B-M6F
HSR 35R HSR 35RM	55	70	109.4	50	50	M8 x 12	80.4	11.7	47.5	15	12	B-M6F
HSR 35LR HSR 35LRM	55	70	134.8	50	72	M8 x 12	105.8	11.7	47.5	15	12	B-M6F
HSR 45R HSR 45LR	70	86	139 170.8	60	60 80	M10 x 17	98 129.8	15	60	20	16	B-PT 1/8
HSR 55R HSR 55LR	80	100	163 201.1	75	75 95	M12 x 18	118 156.1	20.5	67	21	16	B-PT 1/8
HSR 65XR HSR 65XLR	90	126	190.5 250	76	70 120	M16 x 20	138.5 198	23	76	19	16	B-PT 1/8
HSR 65R HSR 65LR	90	126	186 245.5	76	70 120	M16 x 20	147 206.5	23	76	19	16	B-PT 1/8
HSR 85R HSR 85LR	110	156	245.6 303	100	80 140	M18 × 25	178.6 236	29	94	23	16	B-PT 1/8

HSR-YR Type, HSR-YRM Type

Nominal model number	External dimensions			LM block Dimensions
Nominal model number	Height M	Width W	Length L	B₁	B	C	S x L	L₁	K	N	E	Grease Nipple
HSR 15YR HSR 15YRM	28	33.5	56.6	4.3	11.5	18	M4 × 5	38.8	23.3	8.3	5.5	PB1021B
HSR 20YR HSR 20YRM	30	43.5	74	4	11.5	25	M5 × 6	50.8	26	5	12	B-M6F
HSR 25YR HSR 25YRM	40	47.5	83.1	6	16	30	M6 × 6	59.5	34.5	10	12	B-M6F
HSR 30YR HSR 30YRM	45	59.5	98	8	16	40	M6 × 9	70.4	38	10	12	B-M6F
HSR 35YR HSR 35YRM	55	69.5	109.4	8	23	43	M8 × 10	80.4	47.5	15	12	B-M6F
HSR 45YR	70	85.5	139	10	30	55	M10 x 14	98	60	20	16	B-PT 1/8
HSR 55YR	80	99.5	163	12	32	70	M12 × 15	118	67	21	16	B-PT 1/8
HSR 65YR	90	124.5	186	12	35	85	M16 x 22	147	76	19	16	B-PT 1/8

HSR-HA Type, HSR-HB Type, HSR-HR Type

Nominal model number	External dimensions			LM block Dimensions
Nominal model number	Height M	Width W	Length L	B	C	H	S x L	L₁	T	T₁	K	N	E	Grease Nipple
HSR 100HA HSR 100HB HSR 100HR	120	250 250 200	334	220 220 130	200	- 20 -	M18 * - M18 × 27	261	32 32 33	35 35 -	100	23	16	B-PT 1/4
HSR 120HA HSR 120HB HSR 120HR	130	290 290 220	365	250 250 146	210	- 22 -	M20 * - M20 x 30	287	34 34 33.7	38 38 -	110	26.5	16	B-PT 1/4
HSR 150HA HSR 150HB HSR 150HR	145	350 350 266	396	300 300 180	230	- 26 -	M24 * - M24 x 35	314	36 36 33	40 40 -	123	29	16	B-PT 1/4

: 30; 45; 60

Part Number
HSR15B1(GK)
HSR15B1UU(GK)
HSR15C1(GK)
HSR15C1SS(GK)
HSR15C1UU(GK)
HSR15LC1(GK)
HSR15LC1UU(GK)
HSR15R1(GK)
HSR15R1M(GK)
HSR15R1SS(GK)
HSR15R1SSM(GK)
HSR15R1UU(GK)
HSR15R1UUM(GK)
HSR20B1(GK)
HSR20B1UU(GK)
HSR20C1(GK)
HSR20C1SS(GK)
HSR20C1UU(GK)
HSR20LA1(GK)
HSR20LA1SS(GK)
HSR20LA1UU(GK)
HSR20LB1(GK)
HSR20LB1SS(GK)
HSR20LB1UU(GK)
HSR20LC1(GK)
HSR20LC1SS(GK)
HSR20LC1UU(GK)
HSR20LR1(GK)
HSR20LR1M(GK)
HSR20LR1SS(GK)
HSR20LR1SSM(GK)
HSR20LR1UU(GK)
HSR20LR1UUM(GK)
HSR20R1(GK)
HSR20R1M(GK)
HSR20R1SS(GK)
HSR20R1SSM(GK)
HSR20R1UU(GK)
HSR20R1UUM(GK)
HSR25B1UU(GK)
HSR25C1(GK)
HSR25C1SS(GK)
HSR25C1UU(GK)
HSR25LB1SS(GK)
HSR25LB1UU(GK)
HSR25LC1(GK)
HSR25LC1SS(GK)
HSR25LR1(GK)
HSR25LR1M(GK)
HSR25LR1SS(GK)
HSR25LR1SSM(GK)
HSR25LR1UU(GK)
HSR25LR1UUM(GK)
HSR25R1(GK)
HSR25R1M(GK)
HSR25R1SS(GK)
HSR25R1SSM(GK)
HSR25R1UU(GK)
HSR25R1UUM(GK)
HSR30B1SS(GK)

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Block Type (mm)	Nominal Part Number	Rail Type	Material	Ball Arrangement	Block Mounting Hole Pitch (Width Direction) (mm)	Block Mounting Hole Pitch (Length Direction) (mm)	Block Mounting Hole Diameter	Rail Mounting Hole Pitch (mm)	Rail Mounting Hole Diameter	Block External Dimension W (mm)	Block External Dimension L (mm)	Mounting hole for blocks	Mounting Hole Dimension S (M)	Mounting Hole Dimension H (ø)	Mounting Hole Screw Depth (mm)	Block Dimension L1 (mm)	Symbols for Dust Resistance	Nominal Model Number	Ball Arrangement	Block Mounting Hole Pitch (Width Direction) (mm)	Block Mounting Hole Pitch (Length Direction) (mm)	Block Mounting Hole Diameter	Rail Mounting Hole Pitch (mm)	Rail Mounting Hole Diameter
MYR 375.37	1 Piece(s)		4 Day(s) or more	10	Wide	15	Standard	Carbon Steel	4 Rows of Circular	38	30	4.5	60	4.5	47	56.6	Drilled Hole	-	4.5	Through	38.8	No	-	-	-	-	-	-	-
MYR 409.20	1 Piece(s)		4 Day(s) or more	10	Wide	15	Standard	Carbon Steel	4 Rows of Circular	38	30	4.5	60	4.5	47	56.6	Drilled Hole	-	4.5	Through	38.8	End seal	-	-	-	-	-	-	-
MYR 287.04	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	47	56.6	Tapped Holes	M5	-	Through	38.8	No	15	4-row circular	38	30	4.5	60	4.5
MYR 326.94	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	47	56.6	Tapped Holes	M5	-	Through	38.8	End seal + Side seal	15	4-row circular	38	30	4.5	60	4.5
MYR 315.06	1 Piece(s)	Available	6 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	47	56.6	Tapped Holes	M5	-	Through	38.8	End seal	15	4-row circular	38	30	4.5	60	4.5
MYR 315.66	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	47	74.6	Tapped Holes	M5	-	Through	56.8	No	15	4-row circular	38	30	4.5	60	4.5
MYR 371.03	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	47	74.6	Tapped Holes	M5	-	Through	56.8	End seal	15	4-row circular	38	30	4.5	60	4.5
MYR 368.65	1 Piece(s)	Available	4 Day(s) or more	10	Standard	15	Standard	Carbon Steel	4 Rows of Circular	26	26	4	60	4.5	34	56.6	Tapped Holes	M4	-	5	38.8	No	-	-	-	-	-	-	-
MYR 741.49	1 Piece(s)		63 Day(s) or more	10	Standard	15	Standard	Stainless Steel	4 Rows of Circular	26	26	4	60	4.5	34	56.6	Tapped Holes	M4	-	5	38.8	No	-	-	-	-	-	-	-
MYR 422.72	1 Piece(s)	Available	6 Day(s) or more	10	Standard	15	Standard	Carbon Steel	4 Rows of Circular	26	26	4	60	4.5	34	56.6	Tapped Holes	M4	-	5	38.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 801.15	1 Piece(s)		63 Day(s) or more	10	Standard	15	Standard	Stainless Steel	4 Rows of Circular	26	26	4	60	4.5	34	56.6	Tapped Holes	M4	-	5	38.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 409.20	1 Piece(s)	Available	6 Day(s) or more	10	Standard	15	Standard	Carbon Steel	4 Rows of Circular	26	26	4	60	4.5	34	56.6	Tapped Holes	M4	-	5	38.8	End seal	-	-	-	-	-	-	-
MYR 781.26	1 Piece(s)		63 Day(s) or more	10	Standard	15	Standard	Stainless Steel	4 Rows of Circular	26	26	4	60	4.5	34	56.6	Tapped Holes	M4	-	5	38.8	End seal	-	-	-	-	-	-	-
MYR 422.72	1 Piece(s)	Available	6 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	74	Drilled Hole	-	6	Through	50.8	No	-	-	-	-	-	-	-
MYR 456.55	1 Piece(s)		4 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	74	Drilled Hole	-	6	Through	50.8	End seal	-	-	-	-	-	-	-
MYR 331.08	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	63	74	Tapped Holes	M6	-	Through	50.8	No	20	4-row circular	53	40	6	60	4.5
MYR 370.26	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	63	74	Tapped Holes	M6	-	Through	50.8	End seal + Side seal	20	4-row circular	53	40	6	60	4.5
MYR 356.90	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	63	74	Tapped Holes	M6	-	Through	50.8	End seal	20	4-row circular	53	40	6	60	4.5
MYR 503.83	1 Piece(s)	Available	6 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	90	Tapped Holes	M6	-	Through	66.8	No	-	-	-	-	-	-	-
MYR 551.19	1 Piece(s)		4 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	90	Tapped Holes	M6	-	Through	66.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 537.67	1 Piece(s)		4 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	90	Tapped Holes	M6	-	Through	66.8	End seal	-	-	-	-	-	-	-
MYR 503.83	1 Piece(s)		4 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	90	Drilled Hole	-	6	Through	66.8	No	-	-	-	-	-	-	-
MYR 551.19	1 Piece(s)		4 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	90	Drilled Hole	-	6	Through	66.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 537.67	1 Piece(s)		4 Day(s) or more	10	Wide	20	Standard	Carbon Steel	4 Rows of Circular	53	40	6	60	4.5	63	90	Drilled Hole	-	6	Through	66.8	End seal	-	-	-	-	-	-	-
MYR 396.30	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	63	90	Tapped Holes	M6	-	Through	66.8	No	20	4-row circular	53	40	6	60	4.5
MYR 433.88	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	63	90	Tapped Holes	M6	-	Through	66.8	End seal + Side seal	20	4-row circular	53	40	6	60	4.5
MYR 392.49	1 Piece(s)	Available	6 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	63	90	Tapped Holes	M6	-	Through	66.8	End seal	20	4-row circular	53	40	6	60	4.5
MYR 503.83	1 Piece(s)	Available	6 Day(s) or more	10	Standard	20	Standard	Carbon Steel	4 Rows of Circular	32	50	5	60	4.5	44	90	Tapped Holes	M5	-	6	66.8	No	-	-	-	-	-	-	-
MYR 1,039.55	1 Piece(s)		63 Day(s) or more	10	Standard	20	Standard	Stainless Steel	4 Rows of Circular	32	50	5	60	4.5	44	90	Tapped Holes	M5	-	6	66.8	No	-	-	-	-	-	-	-
MYR 551.19	1 Piece(s)	Available	6 Day(s) or more	10	Standard	20	Standard	Carbon Steel	4 Rows of Circular	32	50	5	60	4.5	44	90	Tapped Holes	M5	-	6	66.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 1,099.20	1 Piece(s)		63 Day(s) or more	10	Standard	20	Standard	Stainless Steel	4 Rows of Circular	32	50	5	60	4.5	44	90	Tapped Holes	M5	-	6	66.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 537.67	1 Piece(s)	Available	6 Day(s) or more	10	Standard	20	Standard	Carbon Steel	4 Rows of Circular	32	50	5	60	4.5	44	90	Tapped Holes	M5	-	6	66.8	End seal	-	-	-	-	-	-	-
MYR 1,078.10	1 Piece(s)		63 Day(s) or more	10	Standard	20	Standard	Stainless Steel	4 Rows of Circular	32	50	5	60	4.5	44	90	Tapped Holes	M5	-	6	66.8	End seal	-	-	-	-	-	-	-
MYR 422.72	1 Piece(s)	Available	4 Day(s) or more	10	Standard	20	Standard	Carbon Steel	4 Rows of Circular	32	36	5	60	4.5	44	74	Tapped Holes	M5	-	6	50.8	No	-	-	-	-	-	-	-
MYR 873.96	1 Piece(s)		63 Day(s) or more	10	Standard	20	Standard	Stainless Steel	4 Rows of Circular	32	36	5	60	4.5	44	74	Tapped Holes	M5	-	6	50.8	No	-	-	-	-	-	-	-
MYR 470.07	1 Piece(s)	Available	4 Day(s) or more	10	Standard	20	Standard	Carbon Steel	4 Rows of Circular	32	36	5	60	4.5	44	74	Tapped Holes	M5	-	6	50.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 933.62	1 Piece(s)		63 Day(s) or more	10	Standard	20	Standard	Stainless Steel	4 Rows of Circular	32	36	5	60	4.5	44	74	Tapped Holes	M5	-	6	50.8	End seal + Side seal	-	-	-	-	-	-	-
MYR 456.55	1 Piece(s)	Available	6 Day(s) or more	10	Standard	20	Standard	Carbon Steel	4 Rows of Circular	32	36	5	60	4.5	44	74	Tapped Holes	M5	-	6	50.8	End seal	-	-	-	-	-	-	-
MYR 912.51	1 Piece(s)		63 Day(s) or more	10	Standard	20	Standard	Stainless Steel	4 Rows of Circular	32	36	5	60	4.5	44	74	Tapped Holes	M5	-	6	50.8	End seal	-	-	-	-	-	-	-
MYR 530.87	1 Piece(s)		4 Day(s) or more	10	Wide	25	Standard	Carbon Steel	4 Rows of Circular	57	45	7	60	7	70	83.1	Drilled Hole	-	7	Through	59.5	End seal	-	-	-	-	-	-	-
MYR 393.06	1 Piece(s)	Available	6 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	70	83.1	Tapped Holes	M8	-	Through	59.5	No	25	4-row circular	57	45	8	60	7
MYR 478.79	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	70	83.1	Tapped Holes	M8	-	Through	59.5	End seal + Side seal	25	4-row circular	57	45	8	60	7
MYR 439.29	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	70	83.1	Tapped Holes	M8	-	Through	59.5	End seal	25	4-row circular	57	45	8	60	7
MYR 686.37	1 Piece(s)	Available	6 Day(s) or more	10	Wide	25	Standard	Carbon Steel	4 Rows of Circular	57	45	7	60	7	70	102.2	Drilled Hole	-	7	Through	78.6	End seal + Side seal	-	-	-	-	-	-	-
MYR 639.02	1 Piece(s)		4 Day(s) or more	10	Wide	25	Standard	Carbon Steel	4 Rows of Circular	57	45	7	60	7	70	102.2	Drilled Hole	-	7	Through	78.6	End seal	-	-	-	-	-	-	-
MYR 436.23	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	70	102.2	Tapped Holes	M8	-	Through	78.6	No	25	4-row circular	57	45	8	60	7
MYR 513.08	1 Piece(s)	Available	4 Day(s) or more	-	Wide	-	-	Carbon Steel	-	-	-	-	-	-	70	102.2	Tapped Holes	M8	-	Through	78.6	End seal + Side seal	25	4-row circular	57	45	8	60	7
MYR 584.95	1 Piece(s)	Available	6 Day(s) or more	10	Standard	25	Standard	Carbon Steel	4 Rows of Circular	35	50	8	60	7	48	102.2	Tapped Holes	M6	-	8	78.6	No	-	-	-	-	-	-	-
MYR 1,178.67	1 Piece(s)		63 Day(s) or more	10	Standard	25	Standard	Stainless Steel	4 Rows of Circular	35	50	8	60	7	48	102.2	Tapped Holes	M6	-	8	78.6	No	-	-	-	-	-	-	-
MYR 686.37	1 Piece(s)	Available	4 Day(s) or more	10	Standard	25	Standard	Carbon Steel	4 Rows of Circular	35	50	8	60	7	48	102.2	Tapped Holes	M6	-	8	78.6	End seal + Side seal	-	-	-	-	-	-	-
MYR 1,304.56	1 Piece(s)		63 Day(s) or more	10	Standard	25	Standard	Stainless Steel	4 Rows of Circular	35	50	8	60	7	48	102.2	Tapped Holes	M6	-	8	78.6	End seal + Side seal	-	-	-	-	-	-	-
MYR 639.02	1 Piece(s)	Available	4 Day(s) or more	10	Standard	25	Standard	Carbon Steel	4 Rows of Circular	35	50	8	60	7	48	102.2	Tapped Holes	M6	-	8	78.6	End seal	-	-	-	-	-	-	-
MYR 1,248.77	1 Piece(s)		63 Day(s) or more	10	Standard	25	Standard	Stainless Steel	4 Rows of Circular	35	50	8	60	7	48	102.2	Tapped Holes	M6	-	8	78.6	End seal	-	-	-	-	-	-	-
MYR 490.32	1 Piece(s)	Available	6 Day(s) or more	10	Standard	25	Standard	Carbon Steel	4 Rows of Circular	35	35	8	60	7	48	83.1	Tapped Holes	M6	-	8	59.5	No	-	-	-	-	-	-	-
MYR 986.55	1 Piece(s)		63 Day(s) or more	10	Standard	25	Standard	Stainless Steel	4 Rows of Circular	35	35	8	60	7	48	83.1	Tapped Holes	M6	-	8	59.5	No	-	-	-	-	-	-	-
MYR 591.74	1 Piece(s)	Available	4 Day(s) or more	10	Standard	25	Standard	Carbon Steel	4 Rows of Circular	35	35	8	60	7	48	83.1	Tapped Holes	M6	-	8	59.5	End seal + Side seal	-	-	-	-	-	-	-
MYR 1,112.44	1 Piece(s)		63 Day(s) or more	10	Standard	25	Standard	Stainless Steel	4 Rows of Circular	35	35	8	60	7	48	83.1	Tapped Holes	M6	-	8	59.5	End seal + Side seal	-	-	-	-	-	-	-
MYR 544.39	1 Piece(s)	Available	4 Day(s) or more	10	Standard	25	Standard	Carbon Steel	4 Rows of Circular	35	35	8	60	7	48	83.1	Tapped Holes	M6	-	8	59.5	End seal	-	-	-	-	-	-	-
MYR 1,056.64	1 Piece(s)		63 Day(s) or more	10	Standard	25	Standard	Stainless Steel	4 Rows of Circular	35	35	8	60	7	48	83.1	Tapped Holes	M6	-	8	59.5	End seal	-	-	-	-	-	-	-
MYR 679.58	1 Piece(s)	Available	6 Day(s) or more	10	Wide	30	Standard	Carbon Steel	4 Rows of Circular	72	52	9	80	9	90	98	Drilled Hole	-	9	Through	70.4	End seal + Side seal	-	-	-	-	-	-	-

Basic Information

Set / Single Item	Block only	Radial Clearance(N・m)	Normal	Accuracy Grade(N・m)	Standard Grade
No. of Blocks Used On The Same Rail(mm)	1	Retainer	No	Lubrication System(mm)	No
Rolling Element	Ball	Number of Block Mounting Holes(holes)	4

Configure

101 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Block Type(mm)
- Standard
- Wide
Clear
Nominal Part Number
15

20

25

30

35
Clear
Rail Type
- Standard
Clear
Material
- Carbon Steel
- Stainless Steel
Clear
Ball Arrangement
- 4 Rows of Circular
Clear
Block Mounting Hole Pitch (Width Direction)(mm)
26

32

35

38

40

50

53

57

72

82
Clear
Block Mounting Hole Pitch (Length Direction)(mm)
26

30

35

36

40

45

50

52

60

62

72
Clear
Block Mounting Hole Diameter
4

4.5

5

6

7

8

9

10
Clear
Rail Mounting Hole Pitch(mm)
60

80
Clear
Rail Mounting Hole Diameter
4.5

7

9
Clear
Block External Dimension W(mm)
34

44

47

48

60

63

70

90

100
Clear
Block External Dimension L(mm)
56.6

74

74.6

83.1

90

98

102.2

109.4

120.6

134.8
Clear
Mounting hole for blocks
- Drilled Hole
- Tapped Holes
Clear
Mounting Hole Dimension S(M)
M4

M5

M6

M8

M10
Clear
Mounting Hole Dimension H(ø)
4.5

6

7

9
Clear
Mounting Hole Screw Depth(mm)
5

6

8

10

12

Through
Clear
Block Dimension L1(mm)
38.8

50.8

56.8

59.5

66.8

70.4

78.6

80.4

93

105.8
Clear
Symbols for Dust Resistance
- End seal
- End seal + Side seal
- No
Clear
Nominal Model Number
15

20

25

30

35
Clear
Ball Arrangement
- 4-row circular
Clear
Block Mounting Hole Pitch (Width Direction)(mm)
38

53

57

72

82
Clear
Block Mounting Hole Pitch (Length Direction)(mm)
30

40

45

52

62
Clear
Block Mounting Hole Diameter
4.5

6

8

10
Clear
Rail Mounting Hole Pitch(mm)
- 60
- 80
Clear
Rail Mounting Hole Diameter
- 4.5
- 7
- 9
Clear
type
- HSR-A
- HSR-B
- HSR-C
- HSR-LA
- HSR-LB
- HSR-LC
- HSR-LR
- HSR-LRM
- HSR-R
- HSR-RM
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

6 Day(s) or Less

63 Day(s) or Less

88 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is a Full-Ball Type LM Guide HSR?: Answer: The Full-Ball Type LM Guide HSR is a precision linear motion guide that uses a circulating ball system for smooth and stable movement. It is designed to provide high rigidity, accuracy, and consistent low-friction performance.
Question: What are the benefits of using an HSR-type LM guide?: Answer: •High load-bearing capacity
•Smooth and precise linear motion
•Long lifespan due to high-quality materials
•Stable operation under varying load conditions
Question: How does the 45° contact angle improve LM guide performance?: Answer: The 45° contact angle ensures equal load distribution in all four directions (radial, reverse radial, and horizontal), enhancing stability, reducing friction, and maintaining consistent motion accuracy.
Question: Can I replace only the LM block instead of the entire LM guide?: Answer: Yes, the HSR-type LM guide allows for individual block replacement, making it ideal for maintenance and design modifications without changing the entire rail system.

Check other FAQ (1 items) Hide

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Full-ball type LM guide, world standard HSR model
THK

Days to Ship : 38 Day(s) or more
[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type
THK

Days to Ship : 6 Day(s) or more
[Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type
THK

Days to Ship : 6 Day(s) or more
[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type
THK

Standard Price : MYR 439.18-

Days to Ship : 4 Day(s) or more
[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type
THK

Days to Ship : 6 Day(s) or more
Caged Ball LM Guide, International Standard, SHS Type
THK

Days to Ship : 63 Day(s) or more
Full-ball type LM guide Radial type SR type
THK

Days to Ship : 7 Day(s) or more
[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type
THK

Standard Price : MYR 502.44-

Days to Ship : 4 Day(s) or more
[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type
THK

Standard Price : MYR 416.83-

Days to Ship : 4 Day(s) or more
Caged Ball LM Guide, Radial Type, SSR Type
THK

Days to Ship : 23 Day(s) or more
[Short Delivery Size] Caged Ball LM Guide, Miniature, SRS Type
THK

Standard Price : MYR 275.56

Days to Ship : 4 Day(s) or more
[Short Delivery Size] Caged Ball LM Guide, Radial Type, SSR Type
THK

Days to Ship : 7 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

[Single block] Full-ball type LM guide, world standard HSR model

(i)Caution

Drawing

HSR-C type, HSR-CM type, HSR-LC type, HSR-LCM type, HSR-XC type, HSR-XLC type

HSR-RM type

HSR-R type, HSR-RM type, HSR-LR type, HSR-LRM type

HSR-YR Type, HSR-YRM Type

HSR-HA Type, HSR-HB Type, HSR-HR Type

Specifications Table

HSR-C type, HSR-CM type, HSR-LC type, HSR-LCM type, HSR-XC type, HSR-XLC type

HSR-RM type

HSR-R type, HSR-RM type, HSR-LR type, HSR-LRM type

HSR-YR Type, HSR-YRM Type

HSR-HA Type, HSR-HB Type, HSR-HR Type

Basic Information

Configure

Specification/Dimensions

Block Type(mm)

Nominal Part Number

Rail Type

Material

Ball Arrangement

Block Mounting Hole Pitch (Width Direction)(mm)

Block Mounting Hole Pitch (Length Direction)(mm)

Block Mounting Hole Diameter

Rail Mounting Hole Pitch(mm)

Rail Mounting Hole Diameter

Block External Dimension W(mm)

Block External Dimension L(mm)

Mounting hole for blocks

Mounting Hole Dimension S(M)

Mounting Hole Dimension H(ø)

Mounting Hole Screw Depth(mm)

Block Dimension L1(mm)

Symbols for Dust Resistance

Nominal Model Number

Ball Arrangement

Block Mounting Hole Pitch (Width Direction)(mm)

Block Mounting Hole Pitch (Length Direction)(mm)

Block Mounting Hole Diameter

Rail Mounting Hole Pitch(mm)

Rail Mounting Hole Diameter

type

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm