(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Long-distance type ESD safe proximity sensor E2K-C
Adjustable sensitivity, long distance type ESD safe proximity sensor.
[Features]
· CE marking acquired (direct current 3-wire type, AC/DC universal 2-wire type)
· Also available in types that can be used in environments with stronger noise (noise-resistant type)
Part Number
Configured Part Number is shown.
Drawing
E2K-C25M**
*E, F type: detection indicator light (red) Y type: operation indicator light (red)
E2K-C20M**
Product Specification
Rating / Performance
Standard type
| Items | Type | ||||
|---|---|---|---|---|---|
| Type E2K-C25M*1 | Type E2K-C25M*2 | Type E2K-C25MY1 | Type E2K-C25MY2 | ||
| Standard sensing distance * | 25 mm | ||||
| Adjustable detection distance range | 3 mm to 25 mm | ||||
| Detectable objects | Conductor and dielectric | ||||
| Standard detected object | Grounded metal plate 50 x 50 x 1 mm | ||||
| Hysteresis | 15% or less of the detection distance (when adjusted to 25 mm +/-10% with the standard detected object) | ||||
| Response frequency | 70 Hz | 10 Hz | |||
| Power Supply Voltage (Operating Voltage Range) | 12 to 24 V DC, ripple (p-p) 10% or less (10 to 30 V DC) | 100 to 220 V AC (90 to 250 V AC), 50/60 Hz | |||
| Current Consumption | E, F types: 10 mA or less (at 12 V DC), 16 mA or less (at 24 V DC) | ||||
| Leakage current | Y type: 1 mA or less (at 100 V AC 50/60 Hz), 2 mA or less (at 200 V AC 50/60 Hz) (when output is OFF) | ||||
| Control output | Contact Capacity | 200 mA or less | 5 to 200 mA (resistive load) | ||
| Residual voltage | 2 V or less (when load current is 200 mA, cord length is 2 m) | Refer to "Characteristic Data" | |||
| Indicator Light | Detection display (red) | operation display (red) | |||
| Operating mode (When a detected object approaches) | E1, F1, Y1 types: NO E2, F2, Y2 types: NC For details, refer to the time chart in the "input/output stage circuit diagram" | ||||
| Protection circuit | Reverse Connection Protection, Surge Absorption | Surge Absorption | |||
| Ambient temperature range | When operating, when storing: -25 to +70°C each (no freezing or condensation) | ||||
| Ambient humidity range | Operating, Storage: 35 to 95%RH each (no condensation) | ||||
| Effect of temperature | Within the temperature range of -10 to +55°C: within +/-15% of the detection distance at +23°C Within the temperature range of -25 to +70°C: within +/-25% of the detection distance at +23°C | ||||
| Effect of voltage | Within +/-15% of the rated power supply voltage Within +/-2% of the detection distance at the rated power supply voltage | Rated power supply voltage 100 V AC +20%, -10% Within +/-20% of 200 V AC, within +/-2% of the detection distance at the rated power supply voltage | |||
| Insulation resistance | 50 MΩ or more (500 V DC insulation resistance tester) between all live parts and the case | ||||
| Withstand voltage | 1,000 V AC 50/60 Hz for 1 min between batch of live parts and the case | 1,500 V AC 50/60 Hz for 1 min between batch of live parts and the case | |||
| Vibration (endurance) | 10 to 55 Hz, 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z | ||||
| Shock (endurance) | 500 m/s2 in Each X, Y, Z Direction 10 times | ||||
| Protective Structure | IEC standard IP66 | ||||
| Connection method | Pre-wired type (standard cord length 2 m) | ||||
| Weight (packed state) | Approx. 200 g | ||||
| Material | Case | Heat-resistant ABS | |||
| Detecting surface | |||||
| Accessory | Dedicated installation bracket, M4 screw, instruction manual | ||||
*Detection distance for the standard detected object. For other materials, refer to "Characteristic Data"
Noise resistance type
| Items | Type | ||||
|---|---|---|---|---|---|
| Model E2K-C20MC1 | Model E2K-C20MC2 | Model E2K-C20MT1 | Model E2K-C20MT2 | ||
| Standard sensing distance *1 | 20 mm | ||||
| Adjustable detection distance range | 3 to 20 mm | ||||
| Detectable objects | Conductor and dielectric | ||||
| Standard detected object | Grounded metal plate 50 x 50 x 1 mm | ||||
| Hysteresis | 15% or less of the detection distance (when adjusted to 20 mm +/-10% with the standard detected object) | ||||
| Response frequency *2 | 40 Hz | 25 Hz with AC power supply, 40 Hz with DC power supply | |||
| Power Supply Voltage (Operating Voltage Range) | 12 to 24 V DC, ripple (p-p) 10% or less (10 to 30 V DC) | 24 to 240 V AC (50/60 Hz), 24 to 240 V DC (20 to 250 V AC 50/60 Hz, 20 to 250 V DC) | |||
| Current Consumption | 13 mA or less (at 24 V DC) | - | |||
| Leakage current | - | 1.5 mA or less (at 24 V DC), 1.7 mA or less (at 110 V AC 50/60 Hz), 2.5 mA or less (at 250 V AC 50/60 Hz) Refer to "Characteristic Data" | |||
| Control output | Contact Capacity | 250 mA or less | 5 to 200 mA (resistive load) | ||
| Residual voltage | 2.5 V or less (when load current is 250 mA, cord length is 2 m) | When using AC power supply: 10 V or less, when using DC power supply: 8 V or less Refer to "Characteristic Data" | |||
| Indicator Light | operation display (yellow) | ||||
| Operating mode (When a detected object approaches) | C1, T1 type: NO C2, T2 type: NC For details, refer to the time chart in the "input/output stage circuit diagram" | ||||
| Protection circuit | Reverse connection protection, load short-circuit protection | - | |||
| Ambient temperature range | When operating, when storing: -25 to +70°C each (no freezing or condensation) | ||||
| Ambient temperature range | Operating, Storage: 35 to 95%RH each (no condensation) | ||||
| Effect of temperature | Within the temperature range of -10 to +55°C: within +/-15% of the detection distance at +23°C Within the temperature range of -25 to +70°C: within +/-25% of the detection distance at +23°C | ||||
| Effect of voltage | Within +/-15% of the rated power supply voltage, within +/-2% of the sensing distance at the rated power supply voltage | ||||
| Insulation resistance | 50 MΩ or more (500 V DC insulation resistance tester) between all live parts and the case | ||||
| Withstand voltage | 1,000 V AC 50/60 Hz for 1 min between batch of live parts and the case | 1,500 V AC 50/60 Hz for 1 min between batch of live parts and the case | |||
| Vibration (endurance) | 10 to 55 Hz, 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z | ||||
| Shock (endurance) | 500 m/s2 in Each X, Y, Z Direction 10 times | ||||
| Protective Structure | IEC standard IP65 | ||||
| Connection method *3 | Pre-wired type (cord length 2 m) | ||||
| Weight (packed state) | Approx. 240 g | ||||
| Material | Case | PBT | |||
| Detecting surface | |||||
| Accessory | Dedicated installation bracket, M4 screw, instruction manual | ||||
*1. The detection distance is based on the standard detected object. For other materials, refer to "Characteristic Data"
* 2. The response frequency is an average value.
*3. The cable length is 2 m only. For extension, please use a cable with a cross-sectional area of at least 0.5 mm2.
| Part Number |
|---|
| E2K-C20MC1 2M |
| E2K-C20MC2 2M |
| E2K-C20MT1 2M |
| E2K-C25ME1 2M |
| E2K-C25ME1 5M |
| E2K-C25ME1-8 |
| E2K-C25ME2 2M |
| E2K-C25MF1 2M |
| E2K-C25MY1 2M |
| E2K-C25MY2 2M |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shape | Cylindrical Detection Head Size (Ø) | Shielded / Non-shielded | Operating Environment | Amplifier | Protection Structure (IEC) | Detected Objects | Detection Direction | Case Material | Detecting Surface Material | Head Size Depth (range) (mm) | Head Size Depth (mm) | Acquired Standards | Types | Power Type | Types | Power Supply Voltage | Output Mode | Operation Mode | Connection Method | Cable Length (m) | Different Frequency Type | Cable Specifications | Detection distance L1 details (mm) | Specifications | Body size | Sensing Distance (mm) | Protection Structure | Acquired Standards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 934.53 | 1 Piece(s) | 5 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard / Cold Resistance | Amplifier Built-in Type | IP65 | Conductor and dielectric | Front Surface | Polybutylene Terephthalate | Polybutylene Terephthalate | 70.1～ | 81 | CE / IEC | Noise-resistant type | Direct Current 3-Wire Type | - | 12-24 VDC | Direct current 3-wire type NPN | NO | Pre-wired model | 2 | Standard | Vinyl (PVC)-insulated round cord, φ5.5, 2-core/3-core | 3～20 | - | - | - | - | - | ||
MYR 932.51 | 1 Piece(s) | 5 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard | Amplifier Built-in Type | IP65 | Conductor and dielectric | Front Surface | Polybutylene Terephthalate | Polybutylene Terephthalate | 70.1～ | 81 | CE / IEC | Noise-resistant type | Direct Current 3-Wire Type | - | 12-24 VDC | Direct current 3-wire type NPN | NC | Pre-wired model | 2 | - | Vinyl (PVC)-insulated round cord, φ5.5, 2-core/3-core | 3～20 | - | - | - | - | - | ||
MYR 1,073.79 | 1 Piece(s) | 5 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard / Cold Resistance | Amplifier Built-in Type | IP65 | Conductor and dielectric | Front Surface | Polybutylene Terephthalate | Polybutylene Terephthalate | 70.1～ | 81 | CE / IEC | Noise-resistant type | 2-Wire for Alternating and direct current | - | 24-240 VAC / 24-240 VDC | AC/DC dual-use 2-wire connection | NO | Pre-wired model | 2 | Standard | Vinyl (PVC)-insulated round cord, φ5.5, 2-core/3-core | 3～20 | - | - | - | - | - | ||
MYR 744.84 | 1 Piece(s) | 2 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard / Cold Resistance | Amplifier Built-in Type | IP66 | Conductor and dielectric | Front Surface | [ABS Resin] Heat Resistant ABS | [ABS Resin] Heat Resistant ABS | 70.1～ | 82 | CE / IEC | Standard type | Direct Current 3-Wire Type | - | 12-24 VDC | Direct current 3-wire type NPN | NO | Pre-wired model | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 3～25 | - | - | - | - | - | ||
MYR 799.58 | 1 Piece(s) | 5 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | - | Amplifier Built-in Type | IP66 | - | - | - | - | - | - | CE / IEC | Standard type | - | - | - | Direct current 3-wire type NPN | NO | - | 5 | - | - | 21 to 50 | - | - | 3 to 25 | IP66 | CE/IEC | ||
MYR 956.73 | 1 Piece(s) | 33 Day(s) or more | - | - | - | - | - | - | - | - | - | - | - | - | CE | - | - | Capacitive proximity sensor / switch | 12-24 VDC | 1 x digital output (DC 3-wire / NPN) | - | - | - | - | - | - | For long-range sensing | 34mm housing | - | - | - | ||
MYR 744.90 | 1 Piece(s) | 5 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard / Cold Resistance | Amplifier Built-in Type | IP66 | Conductor and dielectric | Front Surface | [ABS Resin] Heat Resistant ABS | [ABS Resin] Heat Resistant ABS | 70.1～ | 82 | CE / IEC | Standard type | Direct Current 3-Wire Type | - | 12-24 VDC | Direct current 3-wire type NPN | NC | Pre-wired model | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 3～25 | - | - | - | - | - | ||
MYR 744.79 | 1 Piece(s) | 5 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard / Cold Resistance | Amplifier Built-in Type | IP66 | Conductor and dielectric | Front Surface | [ABS Resin] Heat Resistant ABS | [ABS Resin] Heat Resistant ABS | 70.1～ | 82 | CE / IEC | Standard type | Direct Current 3-Wire Type | - | 12-24 VDC | Direct current 3-wire type PNP | NO | Pre-wired model | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 3～25 | - | - | - | - | - | ||
MYR 860.80 | 1 Piece(s) | 2 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard / Cold Resistance | Amplifier Built-in Type | IP66 | Conductor and dielectric | Front Surface | [ABS Resin] Heat Resistant ABS | [ABS Resin] Heat Resistant ABS | 70.1～ | 82 | CE / IEC / CCC | Standard type | AC, 2-Wire | - | 100-220 VAC | AC 2-wire connection | NO | Pre-wired model | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 3～25 | - | - | - | - | - | ||
MYR 860.95 | 1 Piece(s) | 5 Day(s) or more | Cylindrical Column Type | 34 | Non Shield Type | Standard / Cold Resistance | Amplifier Built-in Type | IP66 | Conductor and dielectric | Front Surface | [ABS Resin] Heat Resistant ABS | [ABS Resin] Heat Resistant ABS | 70.1～ | 82 | CE / IEC / CCC | Standard type | AC, 2-Wire | - | 100-220 VAC | AC 2-wire connection | NC | Pre-wired model | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 3～25 | - | - | - | - | - |
Loading...
Specification/Dimensions
-
Shape
- Cylindrical Column Type
-
Cylindrical Detection Head Size(Ø)
-
Shielded / Non-shielded
- Non Shield Type
-
Operating Environment
- Standard
- Cold Resistance
-
Amplifier
- Amplifier Built-in Type
-
Protection Structure (IEC)
- IP65
- IP66
-
Detected Objects
- Conductor and dielectric
-
Detection Direction
- Front Surface
-
Case Material
- Polybutylene Terephthalate
- ABS Resin
-
Detecting Surface Material
- Polybutylene Terephthalate
- ABS Resin
-
Head Size Depth (range)(mm)
- 70.1～
-
Head Size Depth(mm)
-
Acquired Standards
- CE
- IEC
- CCC
-
Types
- Noise-resistant type
- Standard type
-
Power Type
-
Types
-
Power Supply Voltage
- 12-24 VDC
- 24-240 VAC / 24-240 VDC
- 100-220 VAC
-
Output Mode
- 1 x digital output (DC 3-wire / NPN)
- AC 2-wire connection
- AC/DC dual-use 2-wire connection
- Direct current 3-wire type NPN
- Direct current 3-wire type PNP
-
Operation Mode
- NC
- NO
-
Connection Method
-
Cable Length(m)
-
Different Frequency Type
- Standard
-
Cable Specifications
- Vinyl (PVC)-insulated round cord, φ5.5, 2-core/3-core
- Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core
-
Detection distance L1 details(mm)
- 3～20
- 3～25
- 21 to 50
-
Specifications
- For long-range sensing
-
Body size
- 34mm housing
-
Sensing Distance(mm)
- 3 to 25
-
Protection Structure
- IP66
-
type
- E2K
- E2K-C
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 5 Day(s) or Less
- 33 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Proximity Sensors with built-in Amplifier -Square Type-
- Proximity Sensor, Long Detection Range, Screw-In Type
- TL-W Standard Flat Proximity Sensor
- Spatter Guard Type Proximity Sensor [E2EQ]
- Amplifier Separate Proximity Sensor (Knob Type) [E2C]
- All Stainless Steel Body Proximity Sensor [E2EF]
- Position sensor, SRBS Series
- Proximity sensor, SMT Series
Customers Who Viewed This Item Also Viewed
-
![Long Size Proximity Sensor [E2E2]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2E2_DS_J_1_1.jpg?$product_recommend_b$)
Long Size Proximity Sensor [E2E2]OMRON
Standard Price : MYR 416.61-
Days to Ship : 5 Day(s) or more
-
![Proximity Sensor With Built-in Amplifier for Aluminum Detection [E2EY]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2EY_DS_J_1_1.jpg?$product_recommend_b$)
Proximity Sensor With Built-in Amplifier for Aluminum Detection [E2EY]OMRON
Standard Price : MYR 653.87-
Days to Ship : 5 Day(s) or more
-
![High Precision Digital Type Amplifier Separation Proximity Sensor [E2C-EDA]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2C-EDA_DS_J_1_1.jpg?$product_recommend_b$)
High Precision Digital Type Amplifier Separation Proximity Sensor [E2C-EDA]OMRON
Standard Price : MYR 896.75
Days to Ship : 2 Day(s) or more
-
Rectangular standard type proximity sensor TL-N/QOMRON
Standard Price : MYR 154.02-
Days to Ship : 2 Day(s) or more
-
![Long Distance Proximity Sensor [E2EM]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000398993_001.jpg?$product_recommend_b$)
Long Distance Proximity Sensor [E2EM]OMRON
Standard Price : MYR 418.91-
Days to Ship : 2 Day(s) or more
-
Cylindrical type capacitive proximity sensor E2K-XOMRON
Standard Price : MYR 366.23-
Days to Ship : 2 Day(s) or more
-
![Flat-Type Capacitive Proximity Sensor [E2K-F]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2K-F_DS_J_1_1.jpg?$product_recommend_b$)
Flat-Type Capacitive Proximity Sensor [E2K-F]OMRON
Standard Price : MYR 245.81-
Days to Ship : 2 Day(s) or more
-
Amplifier Relay Proximity Sensor E2ECOMRON
Standard Price : MYR 385.82-
Days to Ship : 2 Day(s) or more
-
Ultra Long Distance Type Proximity Sensor (TL-L)OMRON
Standard Price : MYR 2,848.82
Days to Ship : 5 Day(s) or more
-
All-metal & long distance type proximity sensor E2 VOMRON
Standard Price : MYR 545.13-
Days to Ship : 5 Day(s) or more
-
![Resin Case Type Proximity Sensor [E2F]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2F_DS_J_1_1.jpg?$product_recommend_b$)
Resin Case Type Proximity Sensor [E2F]OMRON
Standard Price : MYR 269.09-
Days to Ship : 5 Day(s) or more
-
![Capacitive Proximity Sensor for Liquid Level Detection [E2K-L]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2K-L_DS_J_1_1.jpg?$product_recommend_b$)
Capacitive Proximity Sensor for Liquid Level Detection [E2K-L]OMRON
Standard Price : MYR 936.37-
Days to Ship : 5 Day(s) or more
![Long Size Proximity Sensor [E2E2]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2E2_DS_J_1_1.jpg?$product_recommend_b$)
![Proximity Sensor With Built-in Amplifier for Aluminum Detection [E2EY]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2EY_DS_J_1_1.jpg?$product_recommend_b$)
![High Precision Digital Type Amplifier Separation Proximity Sensor [E2C-EDA]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2C-EDA_DS_J_1_1.jpg?$product_recommend_b$)
![Long Distance Proximity Sensor [E2EM]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000398993_001.jpg?$product_recommend_b$)
![Flat-Type Capacitive Proximity Sensor [E2K-F]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2K-F_DS_J_1_1.jpg?$product_recommend_b$)
![Resin Case Type Proximity Sensor [E2F]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2F_DS_J_1_1.jpg?$product_recommend_b$)
![Capacitive Proximity Sensor for Liquid Level Detection [E2K-L]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2K-L_DS_J_1_1.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy