Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Full-ball type LM guide, world standard HSR model

Click this image to zoom it.

Move the mouse over the image to zoom

A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

(i)Caution

Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Dimensional Drawing / Specification Table / Product Features

[ ! ] Only a part of the lineup is available at MISUMI.. Please use filtering criteria to confirm details.
[ ! ]MISUMI does not support alteration, custom order, or similar requests.
　

HSR-A

Type with tapping applied to the flange section of the LM block.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic rating C	Static rating C₀
	mm	mm	mm	kN	kN
HSR 15 A	24	47	56.6	10.9	15.7
HSR 15AM	24	47	56.6	10.9	15.7
HSR 20 A	30	63	74	19.8	27.4
HSR 20AM	30	63	74	19.8	27.4
HSR 25 A	36	70	83.1	27.6	36.4
HSR 25AM	36	70	83.1	27.6	36.4
HSR 30 A	42	90	98	40.5	53.7
HSR 30AM	42	90	98	40.5	53.7
HSR 35 A	48	100	109.4	53.9	70.2
HSR 35AM	48	100	109.4	53.9	70.2
HSR 45 A	60	120	139	82.2	101
HSR 55 A	70	140	163	121	146
HSR 65 A	90	170	186	195	228
HSR 85 A	110	215	245.6	304	355

HSR-LA

This type has the same cross section shape as the HSR-A type, but with a longer overall length (L) of the LM block, resulting in an increased rated load.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic rating C	Static rating C₀
	mm	mm	mm	kN	kN
HSR 20LA	30	63	90	23.9	35.8
HSR 20LAM	30	63	90	23.9	35.8
HSR 25LA	36	70	102.2	35.2	51.6
HSR 25LAM	36	70	102.2	35.2	51.6
HSR 30LA	42	90	120.6	48.9	70.2
HSR 30LAM	42	90	120.6	48.9	70.2
HSR 35LA	48	100	134.8	65	91.7
HSR 35LAM	48	100	134.8	65	91.7
HSR 45LA	60	120	170.8	100	135
HSR 55LA	70	140	201.1	148	194
HSR 65LA	90	170	245.5	249	323
HSR 85LA	110	215	303	367	464

HSR-B

Because through holes are provided in the flange section of the LM block, this type is used when through holes for mounting bolts cannot be made in the table.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic rating C	Static rating C₀
	mm	mm	mm	kN	kN
HSR 15B	24	47	56.6	10.9	15.7
HSR 15BM	24	47	56.6	10.9	15.7
HSR 20B	30	63	74	19.8	27.4
HSR 20BM	30	63	74	19.8	27.4
HSR 25B	36	70	83.1	27.6	36.4
HSR 25BM	36	70	83.1	27.6	36.4
HSR 30B	42	90	98	40.5	53.7
HSR 30BM	42	90	98	40.5	53.7
HSR 35B	48	100	109.4	53.9	70.2
HSR 35BM	48	100	109.4	53.9	70.2
HSR 45B	60	120	139	82.2	101
HSR 55B	70	140	163	121	146
HSR 65B	90	170	186	195	228
HSR 85B	110	215	245.6	304	355

HSR-LB

This type has the same cross section shape as the HSR-B type, but with a longer overall length (L) of the LM block, resulting in an increased rated load.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic rating C	Static rating C₀
	mm	mm	mm	kN	kN
HSR 20LB	30	63	90	23.9	35.8
HSR 20LBM	30	63	90	23.9	35.8
HSR 25LB	36	70	102.2	35.2	51.6
HSR 25LBM	36	70	102.2	35.2	51.6
HSR 30LB	42	90	120.6	48.9	70.2
HSR 30LBM	42	90	120.6	48.9	70.2
HSR 35LB	48	100	134.8	65	91.7
HSR 35LBM	48	100	134.8	65	91.7
HSR 45LB	60	120	170.8	100	135
HSR 55LB	70	140	201.1	148	194
HSR 65LB	90	170	245.5	249	323
HSR 85LB	110	215	303	367	464

HSR-R

This type features a reduced LM block width (W) with tapping, making it ideal for compact design.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic rating C	Static rating C₀
	mm	mm	mm	kN	kN
HSR 8RM	11	16	24	1.08	2.16
HSR 10RM	13	20	31	1.96	3.82
HSR 12RM	20	27	45	4.7	8.53
HSR 15R	28	34	56.6	10.9	15.7
HSR 15RM	28	34	56.6	10.9	15.7
HSR 20R	30	44	74	19.8	27.4
HSR 20RM	30	44	74	19.8	27.4
HSR 25R	40	48	83.1	27.6	36.4
HSR 25RM	40	48	83.1	27.6	36.4
HSR 30R	45	60	98	40.5	53.7
HSR 30RM	45	60	98	40.5	53.7
HSR 35R	55	70	109.4	53.9	70.2
HSR 35RM	55	70	109.4	53.9	70.2
HSR 45R	70	86	139	82.2	101
HSR 55R	80	100	163	121	146
HSR 65R	90	126	186	195	228
HSR 85R	110	156	245.6	304	355

HSR-LR

This type has the same cross section shape as the HSR-R type, but with a longer overall length (L) of the LM block, resulting in an increased rated load.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic rating C	Static rating C₀
	mm	mm	mm	kN	kN
HSR 20LR	30	44	90	23.9	35.8
HSR 20LRM	30	44	90	23.9	35.8
HSR 25LR	40	48	102.2	35.2	51.6
HSR 25LRM	40	48	102.2	35.2	51.6
HSR 30LR	45	60	120.6	48.9	70.2
HSR 30LRM	45	60	120.6	48.9	70.2
HSR 35LR	55	70	134.8	65	91.7
HSR 35LRM	55	70	134.8	65	91.7
HSR 45LR	70	86	170.8	100	135
HSR 55LR	80	100	201.1	148	194
HSR 65LR	90	126	245.5	249	323
HSR 85LR	110	156	303	367	464

HSR-YR

When using LM guides in opposition, conventional methods required significant time for table processing, made it difficult to achieve high accuracy, and posed challenges for clearance adjustment. With the HSR-YR type, mounting taps are provided on the sides of the block, simplifying the structure and enabling significant reductions in labor-hours as well as improvements in accuracy.

Full-ball type LM guide World Standard HSR Series External Shape

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic Load Rating C	Static Load Rating C₀
	mm	mm	mm	kN	kN
HSR 15YR	28	33.5	56.6	10.9	15.7
HSR 15YRM	28	33.5	56.6	10.9	15.7
HSR 20YR	30	43.5	74	19.8	27.4
HSR 20YRM	30	43.5	74	19.8	27.4
HSR 25YR	40	47.5	83.1	27.6	36.4
HSR 25YRM	40	47.5	83.1	27.6	36.4
HSR 30YR	45	59.5	98	40.5	53.7
HSR 30YRM	45	59.5	98	40.5	53.7
HSR 35YR	55	69.5	109.4	53.9	70.2
HSR 35YRM	55	69.5	109.4	53.9	70.2
HSR 45YR	70	85.5	139	82.2	101
HSR 55YR	80	99.5	163	121	146
HSR 65YR	90	124.5	186	195	228

HSR-CA

This type has tapping applied to six locations on the LM block.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic Load Rating C	Static Load Rating C₀
	mm	mm	mm	kN	kN
HSR 20CA	30	63	74	19.8	27.4
HSR 20CAM	30	63	74	19.8	27.4
HSR 25CA	36	70	83.1	27.6	36.4
HSR 25CAM	36	70	83.1	27.6	36.4
HSR 30CA	42	90	98	40.5	53.7
HSR 30CAM	42	90	98	40.5	53.7
HSR 35CA	48	100	109.4	53.9	70.2
HSR 35CAM	48	100	109.4	53.9	70.2
HSR 45CA	60	120	139	82.2	101
HSR 55CA	70	140	163	121	146
HSR 65CA	90	170	186	195	228
HSR 85CA	110	215	245.6	304	355

HSR-CB

6-bolt type
Since through holes are drilled in six locations on the LM block, it can be used when it is not possible to make mounting bolt through holes in the table.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic Load Rating C	Static Load Rating C₀
	mm	mm	mm	kN	kN
HSR 20CB	30	63	74	19.8	27.4
HSR 20CBM	30	63	74	19.8	27.4
HSR 25CB	36	70	83.1	27.6	36.4
HSR 25CBM	36	70	83.1	27.6	36.4
HSR 30CB	42	90	98	40.5	53.7
HSR 30CBM	42	90	98	40.5	53.7
HSR 35CB	48	100	109.4	53.9	70.2
HSR 35CBM	48	100	109.4	53.9	70.2
HSR 45CB	60	120	139	82.2	101
HSR 55CB	70	140	163	121	146
HSR 65CB	90	170	186	195	228
HSR 85CB	110	215	245.6	304	355

HSR-HA

This type has the same cross section shape as the HSR-CA type, but with a longer overall length (L) of the LM block, resulting in an increased rated load.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic Load Rating C	Static Load Rating C₀
	mm	mm	mm	kN	kN
HSR 20HA	30	63	90	23.9	35.8
HSR 20HAM	30	63	90	23.9	35.8
HSR 25HA	36	70	102.2	35.2	51.6
HSR 25HAM	36	70	102.2	35.2	51.6
HSR 30HA	42	90	120.6	48.9	70.2
HSR 30HAM	42	90	120.6	48.9	70.2
HSR 35HA	48	100	134.8	65	91.7
HSR 35HAM	48	100	134.8	65	91.7
HSR 45HA	60	120	170.8	100	135
HSR 55HA	70	140	201.1	148	194
HSR 65HA	90	170	245.5	249	323
HSR 85HA	110	215	303	367	464

HSR-HB

This type has the same cross section shape as the HSR-CB type, but with a longer overall length (L) of the LM block to increase the rated load.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic Load Rating C	Static Load Rating C₀
	mm	mm	mm	kN	kN
HSR 20HB	30	63	90	23.9	35.8
HSR 20HBM	30	63	90	23.9	35.8
HSR 25HB	36	70	102.2	35.2	51.6
HSR 25HBM	36	70	102.2	35.2	51.6
HSR 30HB	42	90	120.6	48.9	70.2
HSR 30HBM	42	90	120.6	48.9	70.2
HSR 35HB	48	100	134.8	65	91.7
HSR 35HBM	48	100	134.8	65	91.7
HSR 45HB	60	120	170.8	100	135
HSR 55HB	70	140	201.1	148	194
HSR 65HB	90	170	245.5	249	323
HSR 85HB	110	215	303	367	464

HSR 100/120/150HA/HB/HR

Full-ball type LM guide Global Standard HSR Series Features HSR-HC

This is a large-scale HSR type that can be used for large machine tools and structures.

Nominal model number	External dimensions			Standard rated load
	External dimensions			Radial
	Height M	Width W	Length L	Dynamic Load Rating C	Static Load Rating C₀
	mm	mm	mm	kN	kN
HSR 100HA	120	250	334	441	540
HSR 100HB	120	250	334	441	540
HSR 100HR	120	200	334	441	540
HSR 120HA	130	290	365	540	653
HSR 120HB	130	290	365	540	653
HSR 120HR	130	220	365	540	653
HSR 150HA	145	350	396	518	728
HSR 150HB	145	350	396	518	728
HSR 150HR	145	266	396	518	728

[ ! ] Only a part of the lineup is available at MISUMI.. Please use filtering criteria to confirm details.
[ ! ]MISUMI does not support alteration, custom order, or similar requests.
　

Selection Support Information

Note: This nominal model number is for 1 set per single-axis unit. (For parallel use with two axes, a min. of 2 sets is required.)
When equipped with the QZ lubrication unit, a grease fitting is not included. If you would like a grease fitting included with the QZ specification, please contact THK.

Cautions and Prohibitions

Handling

(1) When transporting products weighing 20 kg or more, please use at least two people or transport equipment. It may cause injury or damage.
(2) Do not disassemble each part. It may cause loss of function.
(3) Note that, when an LM block or LM rail is tilted, it may be fallen out by its own weight.
(4) Do not drop or hit the LM guide. It may cause injury or damage. In addition, please note that when shock was applied, the product may lose its function even though there is no visible damage to the external appearance.
(5) When assembling, please make sure not to remove the LM block from the LM rail.
(6) Be careful not to put your hand into the mounting hole of the LM rail, as your hand may get caught between the LM block and the rail, which could cause injury.
(7) When handling the product, wear protective gloves, safety shoes and the like as necessary to ensure safety.

Precautions for use

(1) Be careful to prevent the entry of contaminants such as cutting chips or coolant. Otherwise, it may cause damage.
(2) If the product is used in environments where cutting chip, coolant, corrosive solvents, water, etc. may enter the interior of the product, avoid the ingress of such substances by using bellows, covers, or similar protective measures.
(3) Avoid continuous use at temperatures above 80°C. Except for heat resistant specifications, if this temperature is exceeded, resin and rubber parts may be deformed or damaged.
(4) If cutting chips or other contaminants adhere to the product, please clean it and then reapply lubricant.
(5) In cases of very small strokes, it is difficult for an oil film to form on the contact surfaces between the rolling element and the rolling surface, which may cause fretting. Therefore, please use grease with excellent fretting resistance. In addition, we recommend periodically moving the stroke by approximately the length of the LM block to form an oil film on the rolling surfaces and rolling elements.
(6) Do not forcibly drive positioning components (pins, keys, etc.) into the product. This may cause indentations on the rolling surfaces and result in loss of function.
(7) If it is absolutely necessary to remove and reinsert the LM block from the LM rail during work, please use a dedicated insertion/removal jig. (The insertion/removal jig is not included as standard, so please contact THK if you need to use one.)
(8) When using the insertion/removal jig, make sure the end face of the LM rail and the end face of the jig are in close contact, and insert with the LM rail and the jig kept parallel.
(9) If you insert the LM block at an angle, there is a risk of contaminant ingress, damage to internal components, and the rolling elements falling out.
(10) If the LM block is inserted onto the LM rail and used while the rolling elements are missing, it may cause premature failure.
(11) If the rolling elements fall out of the LM block, do not use it as is. Please contact THK.
(12) If the LM guide is damaged due to an accident or other reasons, the LM block may come off the LM rail and fall. To ensure safe use, please take measures such as adding a fall prevention mechanism.
(13) If the rigidity and accuracy of the mounting components are insufficient, the load on the bearing will be locally concentrated, significantly reducing bearing performance. Therefore, please thoroughly consider the rigidity and accuracy of the housing and base, as well as the strength of the fixing bolts.
(14) If you need to remove the LM block from the LM rail and reassemble it, there are LM block removal/insertion jigs available to make assembly easier. Please contact THK for more information.

Lubrication

(1) Wipe off the anti-rust oil thoroughly and apply lubrication before use.
(2) Avoid mixing different lubricants. Even if the thickener is the same type of grease, differences in additives and other components may have adverse effects on each other.
(3) If the product is used in locations subject to constant vibration, clean rooms, vacuum environments, or other special conditions such as low or high temperatures, please use grease suitable for the specifications and environment.
(4) When lubricating products that do not have a grease fitting or oil hole, apply lubricant directly to the rolling surface and perform several break-in strokes to ensure grease enters the interior.
(5) The consistency of the grease changes depending on the temperature. Please note that changes in consistency will also affect the sliding resistance of the LM guide.
(6) After lubrication, the sliding resistance of the LM guide may increase due to the mixing resistance of the grease. Be sure to perform a break-in operation and allow the grease to fully blend in before operating the machine.
(7) After lubrication, excess grease may scatter around the area, so please wipe it off as needed before use.
(8) Grease deteriorates over time and its lubrication performance decreases, so it is necessary to inspect and replenish the grease according to the frequency of use.
(9) The lubrication interval will vary depending on the usage conditions and operating environment, but as a reference, please lubricate every 100 km of travel (every 3 to 6 months). Please determine the final lubrication interval and amount based on actual machine operation.
(10) If the mounting orientation is not horizontal, the lubricant may have difficulty reaching the rolling surfaces. For mounting orientation, please refer to B1-28, and for lubrication, please refer to B24-2.
(11) When using oil lubrication, depending on the mounting orientation of the LM block, the lubricating oil may not reach all areas. Please contact THK in advance.

Storage

Please store the LM guide indoors in its original manufacturer packaging and shipping configuration, avoiding high temperatures, low temperatures, and high humidity, and keeping it in a horizontal position.
For products stored for a long period, the internal lubricant may have deteriorated over time, so please replenish the lubricant before use.

Disposal

Please dispose of the product appropriately as industrial waste.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
HSR8R[1,2,3,4,5,6,7,8,9]C1M+[25-975/1]L[H,P,SP]M
HSR8R[1,2,3,4,5,6,7,8,9]C1M+[25-975/1]LM
HSR8R[1,2,3,4,5,6,7,8,9]M+[25-975/1]L[H,P,SP]M
HSR8R[1,2,3,4,5,6,7,8,9]M+[25-975/1]LM
HSR15R[1,2,3,4,5,6,7,8,9]+[64-3000/1]L
HSR15R[1,2,3,4,5,6,7,8,9]+[64-3000/1]L[H,P,SP,UP]
HSR15R[1,2,3,4,5,6,7,8,9]C1+[64-3000/1]L
HSR15R[1,2,3,4,5,6,7,8,9]C1+[64-3000/1]L[H,P,SP,UP]
HSR15R[1,2,3,4,5,6,7,8,9]C1M+[64-1240/1]L[H,P,SP,UP]M
HSR15R[1,2,3,4,5,6,7,8,9]C1M+[64-1240/1]LM
HSR15R[1,2,3,4,5,6,7,8,9]M+[64-1240/1]L[H,P,SP,UP]M
HSR15R[1,2,3,4,5,6,7,8,9]M+[64-1240/1]LM
HSR15YR[1,2,3,4,5,6,7,8,9]+[64-3000/1]L
HSR15YR[1,2,3,4,5,6,7,8,9]+[64-3000/1]L[H,P,SP,UP]
HSR15YR[1,2,3,4,5,6,7,8,9]C1+[64-3000/1]L
HSR15YR[1,2,3,4,5,6,7,8,9]C1+[64-3000/1]L[H,P,SP,UP]
HSR15YR[1,2,3,4,5,6,7,8,9]C1M+[64-1240/1]L[H,P,SP,UP]M
HSR15YR[1,2,3,4,5,6,7,8,9]C1M+[64-1240/1]LM
HSR15YR[1,2,3,4,5,6,7,8,9]M+[64-1240/1]L[H,P,SP,UP]M
HSR15YR[1,2,3,4,5,6,7,8,9]M+[64-1240/1]LM
HSR20CA[1,2,3,4,5,6,7,8,9]+[87-3000/1]L
HSR20CA[1,2,3,4,5,6,7,8,9]+[87-3000/1]L[H,P,SP,UP]
HSR20CA[1,2,3,4,5,6,7,8,9]C[0,1]+[87-3000/1]L
HSR20CA[1,2,3,4,5,6,7,8,9]C[0,1]+[87-3000/1]L[H,P,SP,UP]
HSR20CA[1,2,3,4,5,6,7,8,9]C[0,1]M+[87-1480/1]L[H,P,SP,UP]M
HSR20CA[1,2,3,4,5,6,7,8,9]C[0,1]M+[87-1480/1]LM
HSR20CA[1,2,3,4,5,6,7,8,9]M+[87-1480/1]L[H,P,SP,UP]M
HSR20CA[1,2,3,4,5,6,7,8,9]M+[87-1480/1]LM
HSR20CB[1,2,3,4,5,6,7,8,9]+[87-3000/1]L
HSR20CB[1,2,3,4,5,6,7,8,9]+[87-3000/1]L[H,P,SP,UP]
HSR20CB[1,2,3,4,5,6,7,8,9]C[0,1]+[87-3000/1]L
HSR20CB[1,2,3,4,5,6,7,8,9]C[0,1]+[87-3000/1]L[H,P,SP,UP]
HSR20CB[1,2,3,4,5,6,7,8,9]C[0,1]M+[87-1480/1]L[H,P,SP,UP]M
HSR20CB[1,2,3,4,5,6,7,8,9]C[0,1]M+[87-1480/1]LM
HSR20CB[1,2,3,4,5,6,7,8,9]M+[87-1480/1]L[H,P,SP,UP]M
HSR20CB[1,2,3,4,5,6,7,8,9]M+[87-1480/1]LM
HSR20HA[1,2,3,4,5,6,7,8,9]+[103-3000/1]L
HSR20HA[1,2,3,4,5,6,7,8,9]+[103-3000/1]L[H,P,SP,UP]
HSR20HA[1,2,3,4,5,6,7,8,9]C[0,1]+[103-3000/1]L
HSR20HA[1,2,3,4,5,6,7,8,9]C[0,1]+[103-3000/1]L[H,P,SP,UP]
HSR20HA[1,2,3,4,5,6,7,8,9]C[0,1]M+[103-1480/1]L[H,P,SP,UP]M
HSR20HA[1,2,3,4,5,6,7,8,9]C[0,1]M+[103-1480/1]LM
HSR20HA[1,2,3,4,5,6,7,8,9]M+[103-1480/1]L[H,P,SP,UP]M
HSR20HA[1,2,3,4,5,6,7,8,9]M+[103-1480/1]LM
HSR20HB[1,2,3,4,5,6,7,8,9]+[103-3000/1]L
HSR20HB[1,2,3,4,5,6,7,8,9]+[103-3000/1]L[H,P,SP,UP]
HSR20HB[1,2,3,4,5,6,7,8,9]C[0,1]+[103-3000/1]L
HSR20HB[1,2,3,4,5,6,7,8,9]C[0,1]+[103-3000/1]L[H,P,SP,UP]
HSR20HB[1,2,3,4,5,6,7,8,9]C[0,1]M+[103-1480/1]L[H,P,SP,UP]M
HSR20HB[1,2,3,4,5,6,7,8,9]C[0,1]M+[103-1480/1]LM
HSR20HB[1,2,3,4,5,6,7,8,9]M+[103-1480/1]L[H,P,SP,UP]M
HSR20HB[1,2,3,4,5,6,7,8,9]M+[103-1480/1]LM
HSR20LR[1,2,3,4,5,6,7,8,9]+[103-3000/1]L
HSR20LR[1,2,3,4,5,6,7,8,9]+[103-3000/1]L[H,P,SP,UP]
HSR20LR[1,2,3,4,5,6,7,8,9]C[0,1]+[103-3000/1]L
HSR20LR[1,2,3,4,5,6,7,8,9]C[0,1]+[103-3000/1]L[H,P,SP,UP]
HSR20LR[1,2,3,4,5,6,7,8,9]C[0,1]M+[103-1480/1]L[H,P,SP,UP]M
HSR20LR[1,2,3,4,5,6,7,8,9]C[0,1]M+[103-1480/1]LM
HSR20LR[1,2,3,4,5,6,7,8,9]M+[103-1480/1]L[H,P,SP,UP]M
HSR20LR[1,2,3,4,5,6,7,8,9]M+[103-1480/1]LM

Standard Unit Price	Minimum order quantity	Days to Ship	Rail Length L (mm)	Block Type (mm)	Rail Width W1 (mm)	Mounting Height M (mm)	Nominal Part Number	Rail Type	Set / Single Item	Radial Clearance (N・m)	Accuracy Grade (N・m)	Material	No. of Blocks Used On The Same Rail (mm)	Retainer	Rolling Element	Basic Load Rating Dynamic Rating C (N)	Basic Load Rating Static Rating Co (N)	Allowable Static Moment MA (N・m)	Allowable Static Moment MB (N・m)	Allowable Static Moment MC (N・m)	Block Mounting Hole Pitch (Width Direction) (mm)	Block Mounting Hole Pitch (Length Direction) (mm)	Block Mounting Hole Diameter	Rail Mounting Hole Pitch (mm)	Rail Mounting Hole Diameter	Block External Dimension W (mm)	Block External Dimension L (mm)	Mounting hole for blocks	Number of Block Mounting Holes (holes)	Mounting Hole Dimension S (M)	Mounting Hole Dimension H (ø)	Mounting Hole Screw Depth (mm)	Block Dimension L1 (mm)
-	1 Piece(s)	64 Day(s) or more	25 ～ 975	-	-	-	8	-	-	Light Preload	High Grade / Precision Grade / High Precision Grade	Stainless Steel	1 ～ 9	-	-	-	-	-	-	-	10	10	2	20	2.4	-	-	-	-	-	-	-	-
-	1 Piece(s)	64 Day(s) or more	25 ～ 975	-	-	-	8	-	-	Light Preload	Standard Grade	Stainless Steel	1 ～ 9	-	-	-	-	-	-	-	10	10	2	20	2.4	-	-	-	-	-	-	-	-
-	1 Piece(s)	64 Day(s) or more	25 ～ 975	-	-	-	8	-	-	Normal	High Grade / Precision Grade / High Precision Grade	Stainless Steel	1 ～ 9	-	-	-	-	-	-	-	10	10	2	20	2.4	-	-	-	-	-	-	-	-
-	1 Piece(s)	64 Day(s) or more	25 ～ 975	-	-	-	8	-	-	Normal	Standard Grade	Stainless Steel	1 ～ 9	-	-	-	-	-	-	-	10	10	2	20	2.4	-	-	-	-	-	-	-	-
-	1 Piece(s)	77 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Normal	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	77 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	77 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Light Preload	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	77 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Light Preload	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Light Preload	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Light Preload	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Normal	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	26	26	4	60	4.5	34	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Normal	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Light Preload	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 3000	Standard	15	28	15	Standard	Set	Light Preload	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Light Preload	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Light Preload	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	64 ～ 1240	Standard	15	28	15	Standard	Set	Normal	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	10900	15700	94.5	94.5	99.8	11.5	18	4	60	4.5	33.5	56.6	Tapped Holes	4	M4	-	5	38.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Tapped Holes	6	M6	-	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	87 ～ 1480	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	19800	27400	218	218	235	53	40	6	60	6	63	74	Drilled Hole	6	-	6	Through	50.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Tapped Holes	6	M6	-	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Wide	20	30	20	Standard	Set	Normal	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	53	40	6	60	6	63	90	Drilled Hole	6	-	6	Through	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Standard	20	30	20	Standard	Set	Normal	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Standard	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Standard	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 3000	Standard	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Carbon Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Standard	20	30	20	Standard	Set	Light Preload / Medium Precompression	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Standard	20	30	20	Standard	Set	Light Preload / Medium Precompression	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Standard	20	30	20	Standard	Set	Normal	High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8
-	1 Piece(s)	38 Day(s) or more	103 ～ 1480	Standard	20	30	20	Standard	Set	Normal	Standard Grade	Stainless Steel	1 ～ 9	No	Ball	23900	35800	363	363	307	32	50	5	60	6	44	90	Tapped Holes	4	M5	-	6	66.8

1
2
3
4
5
Next >>

Basic Information

Ball Arrangement	4 Rows of Circular

Configure

324 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Rail Length L(mm)
[25-3000/1mm Unit(s)]
Clear
Block Type(mm)
- Standard
- Wide
Clear
Rail Width W1(mm)
15

20

23

28

34

45

53

63
Clear
Mounting Height M(mm)
28

30

36

40

42

45

48

55

60

70

80

90
Clear
Nominal Part Number
8

15

20

25

30

35

45

55

65
Clear
Rail Type
- Standard
Clear
Set / Single Item
- Set
Clear
Radial Clearance(N・m)
- Normal
- Light Preload
- Medium Precompression
Clear
Accuracy Grade(N・m)
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Extra High Precision Grade
Clear
Material
- Carbon Steel
- Stainless Steel
Clear
No. of Blocks Used On The Same Rail(mm)
1

2

3

4

5

6

7

8

9
Clear
Retainer
- No
Clear
Block Mounting Hole Pitch (Width Direction)(mm)
10

11.5

16

23

26

30

32

35

40

50

53

57

60

72

75

76

82

100

116

142
Clear
Block Mounting Hole Pitch (Length Direction)(mm)
10

18

25

26

30

35

36

40

43

45

50

52

55

60

62

70

72

75

80

85

95

110

120
Clear
Block Mounting Hole Diameter
2

4

5

6

7

8

9

10

11

12

14

16
Clear
Rail Mounting Hole Pitch(mm)
20

60

80

105

120

150
Clear
Rail Mounting Hole Diameter
2.4

4.5

6

7

9

14

16

18
Clear
Block External Dimension W(mm)
33.5

34

43.5

44

47.5

48

59.5

60

63

69.5

70

85.5

86

90

100

120

124.5

126

140

170
Clear
Block External Dimension L(mm)
56.6

74

83.1

90

98

102.2

109.4

120.6

134.8

139

163

170.8

186

201.1

245.5
Clear
Mounting hole for blocks
- Drilled Hole
- Tapped Holes
Clear
Number of Block Mounting Holes(holes)
- 4
- 6
Clear
Mounting Hole Dimension S(M)
M4

M5

M6

M8

M10

M12

M14

M16
Clear
Mounting Hole Dimension H(ø)
6

7

9

11

14

16
Clear
Mounting Hole Screw Depth(mm)
5

6

8

9

10

12

14

17

18

20

22

Through
Clear
Block Dimension L1(mm)
38.8

50.8

59.5

66.8

70.4

78.6

80.4

93

98

105.8

118

129.8

147

156.1

206.5
Clear
type
- HSR-CA
- HSR-CAM
- HSR-CB
- HSR-CBM
- HSR-HA
- HSR-HAM
- HSR-HB
- HSR-HBM
- HSR-LR
- HSR-LRM
- HSR-R
- HSR-RM
- HSR-YR
- HSR-YRM
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

38 Day(s) or Less

63 Day(s) or Less

64 Day(s) or Less

68 Day(s) or Less

77 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Caged Ball LM Guide, International Standard, SHS Type
THK

Days to Ship : 63 Day(s) or more
[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type
THK

Days to Ship : 6 Day(s) or more
[Single block] Full-ball type LM guide, world standard HSR model
THK

Standard Price : MYR 287.04-

Days to Ship : 4 Day(s) or more
[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type
THK

Days to Ship : 6 Day(s) or more
[Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type
THK

Days to Ship : 6 Day(s) or more
Full-ball type LM guide Radial type SR type
THK

Days to Ship : 7 Day(s) or more
Caged Ball LM Guide, Miniature, SRS Type
THK

Days to Ship : 43 Day(s) or more
Caged Ball LM Guide, Radial Type, SSR Type
THK

Days to Ship : 23 Day(s) or more
[Short Delivery Size] Caged Ball LM Guide, Miniature, SRS Type
THK

Standard Price : MYR 275.56

Days to Ship : 4 Day(s) or more
Full-Ball Type LM Guide Wide Rail HRW Type
THK

Days to Ship : 7 Day(s) or more
Caged Ball LM Guide Low Floor Wide Rail SHW Type
THK

Days to Ship : 7 Day(s) or more
[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type
THK

Standard Price : MYR 439.18-

Days to Ship : 4 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Full-ball type LM guide, world standard HSR model

(i)Caution

Dimensional Drawing / Specification Table / Product Features

HSR-A

HSR-LA

HSR-B

HSR-LB

HSR-R

HSR-LR

HSR-YR

HSR-CA

HSR-CB

HSR-HA

HSR-HB

HSR 100/120/150HA/HB/HR

Selection Support Information

Cautions and Prohibitions

Handling

Precautions for use

Lubrication

Storage

Disposal

Basic Information

Configure

Specification/Dimensions

Rail Length L(mm)

Block Type(mm)

Rail Width W1(mm)

Mounting Height M(mm)

Nominal Part Number

Rail Type

Set / Single Item

Radial Clearance(N・m)

Accuracy Grade(N・m)

Material

No. of Blocks Used On The Same Rail(mm)

Retainer

Block Mounting Hole Pitch (Width Direction)(mm)

Block Mounting Hole Pitch (Length Direction)(mm)

Block Mounting Hole Diameter

Rail Mounting Hole Pitch(mm)

Rail Mounting Hole Diameter

Block External Dimension W(mm)

Block External Dimension L(mm)

Mounting hole for blocks

Number of Block Mounting Holes(holes)

Mounting Hole Dimension S(M)

Mounting Hole Dimension H(ø)

Mounting Hole Screw Depth(mm)

Block Dimension L1(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm