(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Roller Follower NART-R Type, NART-VR Type (Full Roller Type) (NART20MVR)
- Volume Discount
Non-isolation bearing with internally attached side plates.
(i)Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Part Number
Configured Part Number is shown.
NART20MVR
Drawing
Product Specification
| Optional Specifications | Symbol | |
|---|---|---|
| Material | Carbon steel | No Symbol |
| Stainless steel | M | |
| Rolling Guide Method | With cage | No Symbol |
| Full Roller | V | |
| Seal | No seal | No Symbol |
| With seal | UU | |
| Outer ring shape | Spherical outer ring | R |
Specifications Table
| Part number | Main dimensions | Standard rated load | Track Load Capacity Spherical Outer Ring kN | Rotational Speed Limit* | Weight | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inner diameter dia | Outer diameter D | B | C | a | rsmin | Oil Inlet d1 | With cage | Full Roller | With cage (min-1) | Full Roller (min-1) | With cage g | Full Roller g | ||||
| C kN | C0 kN | C kN | C0 kN | |||||||||||||
| NART 5R | 5 | 16 | 12 | 11 | 12 | 0.3 | 1.5 | 2.84 | 2.65 | 6.46 | 7.81 | 1.08 | 25,000 | 10,500 | 14.5 | 15.1 |
| NART 6R | 6 | 19 | 12 | 11 | 14 | 0.3 | 1.5 | 3.33 | 3.35 | 7.58 | 10.2 | 1.37 | 20,000 | 8,700 | 20.5 | 21.5 |
| NART 8R | 8 | 24 | 15 | 14 | 17.5 | 0.3 | 1.5 | 5.68 | 5.89 | 11.7 | 15.6 | 1.86 | 17,000 | 7,000 | 41.5 | 42.5 |
| NART 10R | 10 | 30 | 15 | 14 | 23.5 | 0.6 | 2 | 7.94 | 7.59 | 15.8 | 18.5 | 2.45 | 15,000 | 5,700 | 64.5 | 66.5 |
| NART 12R | 12 | 32 | 15 | 14 | 25.5 | 0.6 | 2 | 8.53 | 8.44 | 17 | 21 | 2.74 | 13,000 | 5,200 | 71 | 73 |
| NART 15R | 15 | 35 | 19 | 18 | 29 | 0.6 | 2 | 13.7 | 16.4 | 25.3 | 36.9 | 3.14 | 10,000 | 4,300 | 102 | 106 |
| NART 17R | 17 | 40 | 21 | 20 | 32.5 | 1 | 2 | 17.4 | 19.3 | 32 | 46.6 | 3.72 | 9,500 | 3,900 | 149 | 155 |
| NART 20R | 20 | 47 | 25 | 24 | 38 | 1 | 2.5 | 22.9 | 30.6 | 41.7 | 67.7 | 7.15 | 8,000 | 3,400 | 250 | 255 |
| NART 25R | 25 | 52 | 25 | 24 | 43 | 1 | 2.5 | 24.6 | 33.3 | 45.4 | 79.5 | 8.23 | 7,000 | 3,000 | 285 | 295 |
| NART 30R | 30 | 62 | 29 | 28 | 50.5 | 1 | 3 | 33.4 | 51.4 | 60 | 111 | 10.5 | 5,500 | 2,400 | 470 | 485 |
| NART 35R | 35 | 72 | 29 | 28 | 53.5 | 1 | 3 | 35.5 | 57.3 | 63.2 | 123 | 12.9 | 5,000 | 2,200 | 640 | 655 |
| NART 40R | 40 | 80 | 32 | 30 | 61.5 | 1 | 3 | 44.6 | 81.4 | 76.4 | 166 | 14.9 | 4,000 | 1,900 | 845 | 865 |
| ** NART 45R | 45 | 85 | 32 | 30 | 66.5 | 1 | 3 | 46.6 | 88.6 | 80.5 | 183 | 16.1 | 4,000 | 1,700 | 915 | 935 |
| NART 50R | 50 | 90 | 32 | 30 | 76 | 1 | 3 | 48.3 | 95.7 | 84.4 | 200 | 17.3 | 3,500 | 1,600 | 980 | 1,010 |
Note 1) **: Only the NART45R type is compatible with carbon steel.
Note 2) * applies to models without seals and with grease lubrication. For oil lubrication, up to 130% of this value is permissible; for models with seals, up to 70% of this value is permissible.
Product Feature Details
Figure 1: Structure of the roller follower NAST-ZZUU type
Structure and Features
The roller follower is a compact and highly rigid bearing with a built-in needle bearing, used as a cam follower or as a guide roller for linear motion.
The outer ring is designed to be thick-walled so that it can withstand impact loads, as it rotates while being in direct contact with the mating surface.
In addition, precision cage-equipped needle rollers are built into the inside of the outer ring, which prevents skewing, provides excellent rotating performance, and allows for reliable operation even at high speeds.
Roller followers are available in both separable types, where the inner and outer rings can be separated, and non-separable types, where they cannot be separated.
The outer diameter of the outer ring is available in both spherical and cylindrical shapes. The spherical outer ring can absorb misalignment during installation with ease and helps to reduce uneven loads.
They are widely used in applications such as cam mechanisms of automatic machines and dedicated machines, various transport devices, conveyors, bookbinding machines, tool changers for machining centers, pallet changers, automatic painting machines, and slide-out forks in automated warehouses.
Selection Support Information
Example of Part Number Structure
Cautions and Prohibitions
Handling
(1) Do not disassemble each part. It may cause loss of function.
(2) Do not drop or hit the roller follower. It may cause injury or damage.
In addition, please note that when shock was applied, the product may lose its function even though there is no visible damage to the external appearance.
(3) When handling the product, wear protective gloves, safety shoes, and the like as necessary to ensure safety.
Precautions for use
(1) Avoid continuous use at temperatures above 80°C. If the temperature exceeds this level, resin and rubber parts may be deformed or damaged.
(2) Be careful to prevent contaminants such as cutting chips or coolant from entering. Otherwise, it may cause damage.
(3) If cutting chip or other contaminant adheres, please clean it and then reapply lubricant.
(4) Roller followers can bear radial load, so please avoid using them in a way that involves thrust load.
(5) In cases of slight oscillation, it is difficult for an oil film to form on the contact surfaces between the rolling element and the rolling surface, which may cause fretting. Please use grease with excellent fretting resistance. In addition, it is recommended to perform a rotating operation of about one full turn periodically to form an oil film on the rolling surface and rolling element.
(6) If the rigidity and accuracy of the mounting components are insufficient, the load on the bearing will be locally concentrated, and the bearing performance will be significantly reduced. Therefore, please thoroughly consider the rigidity and accuracy of the housing and base, as well as the strength of the fixing bolts.
Lubrication
(1) Some types of roller follower are not filled with grease depending on the model number, so please lubricate the ones not filled with grease before use. Standard grease is No. 2 lithium soap based grease.
(2) Avoid mixing different lubricants, and be sure to replenish lubricant as needed during use.
Even if the thickener is the same type of grease, differences in additives and other components may have adverse effects on each other.
(3) Please also apply lubricant between the roller follower and the mating rolling surface before use.
(4) When used in locations subject to constant vibration, clean rooms, vacuum, or special environments such as low or high temperatures, please use grease suitable for the specifications and environment.
(5) The consistency of the grease changes depending on the temperature. Please note that changes in consistency will also affect the sliding resistance of the roller follower.
(6) After lubrication, the sliding resistance of the roller follower may increase due to the mixing resistance of the grease. Be sure to perform a break-in operation and allow the grease to fully blend in before operating the machine.
(7) Even with seals, excess grease may splatter around during initial use or immediately after re-lubrication, so please wipe it off as needed before use.
(8) The properties of grease deteriorate and its lubrication performance declines over time, so it is necessary to inspect and replenish the grease according to usage frequency.
(9) Lubrication intervals vary depending on usage conditions and operating environment. Please determine the final lubrication interval and amount based on actual machine operation.
Storage
Please store the roller follower indoors, in MISUMI's packaging and shipping configuration, avoiding high temperatures, low temperatures, and high humidity.
For products stored for a long period, the internal lubricant may have deteriorated over time, so please replenish the lubricant before use.
Disposal
Please dispose of the product appropriately as industrial waste.
| Part Number |
|---|
| NART20MVR |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Outer Diameter D (mm) | Width C (mm) | Roller Follower Inner Dia. D (mm) | Material | Rolling Guide Method | Basic Load Rating Dynamic Rating (kN) | Basic Load Rating Static Rating (kN) | Allowable Rotational Speed (rpm) | Sealing Structure | Track Load Capacity (kN) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 361.11 | 1 Piece(s) | Available | 43 Day(s) or more | - | 47 | 24 | 20 | Stainless Steel | Total roller type | 41.7 | 67.7 | 3400 | No Seal | 7.15 |
Loading...
Basic Information
| Product Category | Roller Follower | Roller Type | Spherical Outer Ring | Size Standard | Metric |
|---|---|---|---|---|---|
| Roller Follower Type | Non-Separable Type | Roller Lining | No | Axis | No |
| Inner Ring | Presence | Dedicated Grease Fitting Included | NA |
Specification/Dimensions
-
type
- NART-R
- NART-VR
-
Outer Diameter D(mm)
-
Width C(mm)
-
Roller Follower Inner Dia. D(mm)
-
Material
- Carbon Steel
- Stainless Steel
-
Rolling Guide Method
- With Gage
- Total roller type
-
Allowable Rotational Speed(rpm)
-
Sealing Structure
- No Seal
- With Seal
-
Track Load Capacity(kN)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 5 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 23 Day(s) or Less
- 43 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cam Followers-With Female Thread Hole for Grease Fitting/Flat Type
- Cam Followers with Brackets-Block
- Roller Followers - Non Separate
- Cam Followers Stainless Steel, Flat, Hex Socket
- Roller Follower With Attached Retainer, RNA
- Full-Roller Type Cam Follower KRV
- Cam follower with lubrication tapped hole, CFT type
- Roller Follower (Multi-Sequence Cylindrical Roller)
Customers Who Viewed This Item Also Viewed
-
-
Roller Followers-Solid/Crowned Type/High Load Crowned Type/With Seal/No SealMISUMI
Standard Price : MYR 63.04-
Days to Ship : 2 Day(s) or more
-
Roller follower NAST-ZZ type (separable type, with side plates)THK
Standard Price : MYR 71.78-
Days to Ship : 4 Day(s) or more
-
-
Roller Follower (Non-Separable Type)IKO
Standard Price : MYR 111.76-
Days to Ship : 4 Day(s) or more
-
Hex socket head cam follower CF-A typeTHK
Standard Price : MYR 87.45-
Days to Ship : 5 Day(s) or more
-
-
Standard Type Cam Follower CF/CF-AB TypeTHK
Standard Price : MYR 208.37-
Days to Ship : 5 Day(s) or more
-
Roller Followers-Separate/Flat Type/With Seal/No SealMISUMI
Standard Price : MYR 50.68-
Days to Ship : 1 Day(s) or more
-
-
Roller Follower NAST Type (Separable Type)THK
Standard Price : MYR 60.30-
Days to Ship : 4 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy