Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Cam follower with lubrication tapped hole, CFT type (CFT6M)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

THK

Cam follower with stud head and screw section normally used for tap pipe processing.

(i)Caution

Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.

Part Number

Configured Part Number is shown.

CFT6M

Product Specifications
Part Numbers
Catalog

Drawing

Product Specification

Optional Specifications		Symbol
Rolling Guide Method	With cage	No Symbol
Rolling Guide Method	Full Roller	V
Material	Carbon steel	No Symbol
Material	Stainless steel	M
Seal	No seal	No Symbol
Seal	With seal	UU
Outer ring shape	Cylindrical outer ring	No Symbol
Outer ring shape	Spherical outer ring	R

Specifications Table

Stud diameter d	Part number	Main dimensions
		Outer diameter D	Outer ring width C	Thread G	G₁	B	full length B₁	B₂	B₃	C₁	S₁	d₂	r_smin	Shoulder dimension f (Minimum)
		Outer diameter D	Outer ring width C	Thread G	G₁	B	full length B₁	B₂	B₃	C₁	S₁	d₂	r_smin	Shoulder dimension f (Minimum)
6	CFT 6	16	11	M6 x 1	8	12	28	16	-	0.6	M6 x 0.75^*	-	0.3	11
8	CFT 8	19	11	M8 x 1.25	10	12	32	20	-	0.6	M6 x 0.75^*	-	0.3	13
10	CFT 10	22	12	M10 x 1.25	12	13	36	23	-	0.6	M6 x 0.75^*	-	0.3	15
10	CFT 10-1	26	12	M10 x 1.25	12	13	36	23	-	0.6	M6 x 0.75^*	-	0.3	15
12	CFT 12	30	14	M12 x 1.5	13	15	40	25	6	0.6	M6 x 0.75	3	0.6	20
12	CFT 12-1	32	14	M12 x 1.5	13	15	40	25	6	0.6	M6 x 0.75	3	0.6	20
16	CFT 16	35	18	M16 x 1.5	17	19.5	52	32.5	8	0.8	PT 1/8	3	0.6	24
18	CFT 18	40	20	M18 x 1.5	19	21.5	58	36.5	8	0.8	PT 1/8	3	1	26
20	CFT 20	52	24	M20 x 1.5	21	25.5	66	40.5	9	0.8	PT 1/8	4	1	36
20	CFT 20-1	47	24	M20 x 1.5	21	25.5	66	40.5	9	0.8	PT 1/8	4	1	36
24	CFT 24	62	29	M24 x 1.5	25	30.5	80	49.5	11	0.8	PT 1/8	4	1	40
24	CFT 24-1	72	29	M24 x 1.5	25	30.5	80	49.5	11	0.8	PT 1/8	4	1	40
30	CFT 30	80	35	M30 x 1.5	32	37	100	63	15	1	PT 1/8	4	1	46
30	CFT 30-1	85	35	M30 x 1.5	32	37	100	63	15	1	PT 1/8	4	1	46
30	CFT 30-2	90	35	M30 x 1.5	32	37	100	63	15	1	PT 1/8	4	1	46

Stud diameter d	Part number	Standard rated load				Maximum Allowable load F₀ kN	Track Load Capacity		Rotational Speed Limit^*1		Weight
		With cage		Full Roller			Cylindrical outer ring kN	Spherical outer ring kN	With cage (min^-1)	Full Roller (min^-1)	With cage g	Full Roller g
		C kN	C₀ kN	C kN	C₀ kN		Cylindrical outer ring kN	Spherical outer ring kN	With cage (min^-1)	Full Roller (min^-1)	With cage g	Full Roller g
6	CFT 6	3.59	3.58	6.94	8.5	2.11	3.43	1.08	25,000	11,000	18.5	19
8	CFT 8	4.17	4.65	8.13	11.2	4.73	4.02	1.37	20,000	8,700	28.5	29
10	CFT 10	5.33	6.78	9.42	14.3	5.81	4.7	1.67	17,000	7,200	45	46
10	CFT 10-1	5.33	6.78	9.42	14.3	5.81	5.49	2.06	17,000	7,200	60	61
12	CFT 12	7.87	9.79	13.4	19.8	9.37	7.06	2.45	14,000	5,800	105	107
12	CFT 12-1	7.87	9.79	13.4	19.8	9.37	7.45	2.74	14,000	5,800	115	117
16	CFT 16	12	18.3	20.6	37.6	17.3	11.2	3.14	10,000	4,500	205	207
18	CFT 18	14.7	25.2	25.2	51.3	26.1	14.4	3.72	8,500	3,800	295	300
20	CFT 20	20.7	34.8	33.2	64.8	32.1	23.2	8.23	7,000	3,400	525	530
20	CFT 20-1	20.7	34.8	33.2	64.8	32.1	21	7.15	7,000	3,400	450	455
24	CFT 24	30.6	53.2	46.7	92.9	49.5	34.2	10.5	6,500	2,900	915	925
24	CFT 24-1	30.6	53.2	46.7	92.9	49.5	39.8	12.9	6,500	2,900	1,150	1,160
30	CFT 30	45.4	87.6	67.6	145	73.7	52.6	14.9	5,000	2,300	1,880	1,890
30	CFT 30-1	45.4	87.6	67.6	145	73.7	56	16.1	5,000	2,300	1,950	1,960
30	CFT 30-2	45.4	87.6	67.6	145	73.7	59.3	17.3	5,000	2,300	2,000	2,010

*The grease supply tap is processed only on the head.
Note: *1 applies to models without seals and is intended for grease lubrication. For oil lubrication, up to 130% of this value is permissible; for models with seals, up to 70% of this value is permissible.

Product Feature Details

Figure 1 Structure of Cam Follower CF: UU-A Type

Structure and Features

The cam follower is a compact, high-rigidity shaft-type bearing with built-in needle rollers, used as a guide roller for cam mechanisms and linear motion.
Since the outer ring performs rotary motion while being in direct contact with the mating surface, it is designed to be thick-walled to withstand impact loads.
Precision needle rollers with cages are built into the inside of the outer ring, which prevents skewing, provides excellent rotating performance, and allows it to fully withstand high-speed rotation.
The outer diameter of the outer ring is available in both spherical and cylindrical shapes. The spherical outer ring can absorb misalignment during installation with ease and helps to reduce uneven loads.
They are widely used in cam mechanisms of automatic and dedicated machines, as well as in various transport devices, conveyors, bookbinding machines, tool changers for machining centers, pallet changers, automatic painting machines, and slide-out forks for automated warehouses.

Selection Support Information

Example of Part Number Structure

Example of Part Number Configuration for Cam Follower with Lubrication Tapped Hole, CFT Type

Cautions and Prohibitions

Handling
(1) Do not disassemble each part. It may cause loss of function.
(2) Do not drop or hit the cam follower. It may cause injury or damage. In addition, please note that when shock was applied, the product may lose its function even though there is no visible damage to the external appearance.
(3) When handling the product, wear protective gloves, safety shoes, and the like as necessary to ensure safety.

Precautions for Use
(1) When securing the cam follower, tighten the nut using a torque wrench or similar tool.
(2) Avoid continuous use at temperatures above 80°C. If the temperature exceeds this level, resin and rubber parts may be deformed or damaged.
(3) Be careful to prevent cutting chip, coolant, or other contaminant from entering. Otherwise, it may cause damage.
(4) If cutting chip or other contaminant adheres to the product, please clean it and then reapply lubricant.
(5) Cam followers can bear radial load, so please avoid using them in a way that bears thrust load.
(6) In cases of slight oscillation, it is difficult for an oil film to form on the contact surface between the rolling element and the rolling surface, which may cause fretting. Therefore, please use grease with excellent fretting resistance. In addition, it is recommended to perform a rotating operation of about one full turn periodically to form an oil film on the rolling surface and rolling element.
(7) If the rigidity and accuracy of the mounting component are insufficient, the load on the bearing will be locally concentrated, and bearing performance will be significantly reduced. Therefore, please thoroughly consider the rigidity and accuracy of the housing and base, as well as the strength of the fixing bolts.

Lubrication
(1) Please replenish grease as needed during use. Avoid reapplying different lubricants. Even if the thickener is the same type of grease, differences in additives and other components may have adverse effects on each other.
(2) Please apply lubricant between the cam follower and the mating rolling surface before use.
(3) When lubricating, be careful not to dislodge the plug from the bottom of the hex socket due to excessive pressure.
(4) When used in locations subject to constant vibration, clean rooms, vacuum, or special environments such as low or high temperatures, please use grease suitable for the specifications and environment.
(5) The consistency of the grease changes depending on the temperature. Please note that changes in consistency will also affect the sliding resistance of the cam follower.
(6) After lubrication, the sliding resistance of the cam follower may increase due to the mixing resistance of the grease. Be sure to perform a break-in operation and allow the grease to fully blend in before operating the machine.
(7) Even with seals, excess grease may splatter around during initial use or immediately after re-lubrication, so please wipe it off as needed before use.
(8) The properties of grease deteriorate and its lubrication performance declines over time, so it is necessary to inspect and replenish the grease according to usage frequency.
(9) Lubrication intervals vary depending on usage conditions and operating environment. Please determine the final lubrication interval and amount based on actual machine operation.

Storage
Please store the cam follower in THK's packaging and shipping configuration, avoiding high temperatures, low temperatures, and high humidity, and keep it indoors.
For products stored for a long period, the internal lubricant may have deteriorated over time, so please replenish the lubricant before use.

Disposal
Please dispose of the product appropriately as industrial waste.

: 30; 45; 60

Part Number
CFT6M

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Outer Diameter D (mm)	Width C (mm)	Roller Type	Cam follower stud screw (mm)	Material	Basic Load Rating Dynamic Rating (kN)	Basic Load Rating Static Rating (kN)	Allowable Rotational Speed (rpm)	Sealing Structure	Track Load Capacity (kN)
	MYR 149.55	1 Piece(s)		43 Day(s) or more	-	16	11	Cylindrical Outer Ring	M6	Stainless Steel	3.59	3.58	25000	With Seal	3.43

Product TOP

Basic Information

Product Category	Cam Followers	Fastening Methods	With Driver Groove	Cam Followers Type	Standard
Size Standard	Metric	Roller Lining	No	Axis	Presence
Rolling Guide Method	With Gage	Dedicated Grease Fitting Included	NA

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- CFT
- CFT-M
- CFT-MR
- CFT-R
Clear
Outer Diameter D(mm)
16

19

22

26

30

32

35

40

47

52

62

72

80

85

90
Clear
Width C(mm)
11

12

14

18

20

24

29

35
Clear
Roller Type
- Spherical Outer Ring
- Cylindrical Outer Ring
Clear
Cam follower stud screw(mm)
M6

M8

M10

M12

M16

M18

M20

M24

M30
Clear
Material
- Carbon Steel
- Stainless Steel
Clear
Allowable Rotational Speed(rpm)
5000

6500

7000

8500

10000

14000

17000

20000

25000
Clear
Sealing Structure
- No Seal
- With Seal
Clear
Track Load Capacity(kN)
1.08

1.37

1.67

2.06

2.45

2.74

3.14

3.43

3.72

4.7

5.49

7.06

7.15

7.45

8.23

10.5

11.2

12.9

14.4

14.9

16.1

17.3

21

23.2

34.2

39.8

56

59.3
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less

12 Day(s) or Less

23 Day(s) or Less

29 Day(s) or Less

43 Day(s) or Less

44 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Standard Type Cam Follower CF/CF-AB Type
THK

Standard Price : MYR 208.37-

Days to Ship : 5 Day(s) or more
Cam FollowerCFH Type
THK

Standard Price : MYR 99.41-

Days to Ship : 4 Day(s) or more
Cam Follower for Central Piping
IKO

Standard Price : MYR 157.72-

Days to Ship : 4 Day(s) or more
Cam Follower CFH-AB Type
THK

Standard Price : MYR 124.07-

Days to Ship : 5 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Cam follower with lubrication tapped hole, CFT type (CFT6M)

(i)Caution

Drawing

Product Specification

Specifications Table

Product Feature Details

Structure and Features

Selection Support Information

Example of Part Number Structure

Cautions and Prohibitions

Basic Information

Configure

Specification/Dimensions

type

Outer Diameter D(mm)

Width C(mm)

Roller Type

Cam follower stud screw(mm)

Material

Allowable Rotational Speed(rpm)

Sealing Structure

Track Load Capacity(kN)

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm