Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Cam FollowerCFH Type

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

A cam follower where precision adjustment of the position is easily performed by turning the stud,
as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm.

(i)Caution

Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Drawing

CFH Type

CFH-AB Type (eccentricity with grease fitting)

Dimensional drawing of cam follower CFH-AB type

Product Specification

Optional Specifications		Symbol
Rolling Guide Method	With cage	No Symbol
Rolling Guide Method	Full Roller	V
Material	Carbon steel	No Symbol
Material	Stainless steel	M
Seal	No seal	No Symbol
Seal	With seal	UU
Outer ring shape	Cylindrical outer ring	No Symbol
Outer ring shape	Spherical outer ring	R

Specifications Table

Type	Stud diameter d	Part number	Main dimensions
Type	Stud diameter d	Part number	Outer diameter D	Outer ring width C	Thread G	G1	B	full length B₁	B₂	C₁	Eccentricity e	H	r_smin	Shoulder dimension f (Minimum)
CFH-A Type	5^*1	CFH 5-A	13	9	M5 x 0.8	7.5	10	23	13	0.5	0.2	3	0.3	9.7
	6	CFH 6-A	16	11	M6 x 1	8	12	28	16	0.6	0.25	3	0.3	11
	8	CFH 8-A	19	11	M8 x 1.25	10	12	32	20	0.6	0.25	4	0.3	13
	10	CFH 10-A	22	12	M10 x 1.25	12	13	36	23	0.6	0.3	5	0.3	15
	10	CFH 10-1-A	26	12	M10 x 1.25	12	13	36	23	0.6	0.3	5	0.3	15
CFH-AB Type Eccentricity with grease fitting	12	CFH 12-AB	30	14	M12 x 1.5	13	15	40	25	0.6	0.4	6	0.6	20
	12	CFH 12-1-AB	32	14	M12 x 1.5	13	15	40	25	0.6	0.4	6	0.6	20
	16	CFH 16-AB	35	18	M16 x 1.5	17	19.5	52	32.5	0.8	0.5	6	0.6	24
	18	CFH 18-AB	40	20	M18 x 1.5	19	21.5	58	36.5	0.8	0.6	6	1	26
	20	CFH 20-AB	52	24	M20 x 1.5	21	25.5	66	40.5	0.8	0.7	8	1	36
	20	CFH 20-1-AB	47	24	M20 x 1.5	21	25.5	66	40.5	0.8	0.7	8	1	36
	24	CFH 24-AB	62	29	M24 x 1.5	25	30.5	80	49.5	0.8	0.8	8	1	40
	24	CFH 24-1-AB	72	29	M24 x 1.5	25	30.5	80	49.5	0.8	0.8	8	1	40
	30	CFH 30-AB	80	35	M30 x 1.5	32	37	100	63	1	1	8	1	46
	30	CFH 30-1-AB	85	35	M30 x 1.5	32	37	100	63	1	1	8	1	46
	30	CFH 30-2-AB	90	35	M30 x 1.5	32	37	100	63	1	1	8	1	46

Type	Stud diameter d	Part number	Standard rated load				Maximum Allowable load F₀ kN	Track Load Capacity		Rotational Speed Limit*2		Weight
			With cage		Full Roller			Cylindrical outer ring kN	Spherical outer ring kN	With cage (min_-1)	Full Roller (min_-1)	With cage g	Full Roller g
			C kN	C₀ kN	C kN	C₀ kN		Cylindrical outer ring kN	Spherical outer ring kN	With cage (min_-1)	Full Roller (min_-1)	With cage g	Full Roller g
CFH-A Type	5^*1	CFH 5-A	3.14	2.77	5.1	5.5	1.42	2.25	0.53	29,000	11,600	10.5	11
	6	CFH 6-A	3.59	3.58	6.94	8.5	2.11	3.43	1.08	25,000	11,000	18.5	19
	8	CFH 8-A	4.17	4.65	8.13	11.2	4.73	4.02	1.37	20,000	8,700	28.5	29
	10	CFH 10-A	5.33	6.78	9.42	14.3	5.81	4.7	1.67	17,000	7,200	45	46
	10	CFH 10-1-A	5.33	6.78	9.42	14.3	5.81	5.49	2.06	17,000	7,200	60	61
CFH-AB Type Eccentricity with grease fitting	12	CFH 12-AB	7.87	9.79	13.4	19.8	9.37	7.06	2.45	14,000	5,800	105	107
	12	CFH 12-1-AB	7.87	9.79	13.4	19.8	9.37	7.45	2.74	14,000	5,800	115	117
	16	CFH 16-AB	12	18.3	20.6	37.6	17.3	11.2	3.14	10,000	4,500	205	207
	18	CFH 18-AB	14.7	25.2	25.2	51.3	26.1	14.4	3.72	8,500	3,800	295	300
	20	CFH 20-AB	20.7	34.8	33.2	64.8	32.1	23.2	8.23	7,000	3,400	525	530
	20	CFH 20-1-AB	20.7	34.8	33.2	64.8	32.1	21	7.15	7,000	3,400	450	455
	24	CFH 24-AB	30.6	53.2	46.7	92.9	49.5	34.2	10.5	6,500	2,900	915	925
	24	CFH 24-1-AB	30.6	53.2	46.7	92.9	49.5	39.8	12.9	6,500	2,900	1,150	1,160
	30	CFH 30-AB	45.4	87.6	67.6	145	73.7	52.6	14.9	5,000	2,300	1,880	1,890
	30	CFH 30-1-AB	45.4	87.6	67.6	145	73.7	56	16.1	5,000	2,300	1,950	1,960
	30	CFH 30-2-AB	45.4	87.6	67.6	145	73.7	59.3	17.3	5,000	2,300	2,000	2,010

Note: We also manufacture grooved driver types with a grease supply hole processed into the head. (The symbol "-A" is not added to the end of the model number for grooved driver types.)

Since there is no grease supply hole, re-lubrication is not possible.
*1: The CFH5-A type is only available in carbon steel.
*2 is compatible with grease lubrication without seals. For oil lubrication, up to 130% of this value is permissible; for models with seals, up to 70% of this value is permissible.
The AB type is not available in a grooved specification.

Product Feature Details

Figure 1 Structure of Cam Follower CF: UU-A Type

Structure and Features

The cam follower is a compact, high-rigidity shaft-type bearing with built-in needle rollers, used as a guide roller for cam mechanisms and linear motion.
Since the outer ring performs rotary motion while being in direct contact with the mating surface, it is designed to be thick-walled to withstand impact loads.
In addition, precision needle rollers with cages are incorporated inside the outer ring to prevent skewing, ensuring excellent rotating performance and sufficient durability for high-speed rotation.
The outer diameter of the outer ring is available in both spherical and cylindrical shapes. The spherical outer ring can absorb misalignment during installation with ease and helps to reduce uneven loads.
They are widely used in cam mechanisms of automatic and dedicated machines, as well as in various transport devices, conveyors, bookbinding machines, tool changers for machining centers, pallet changers, automatic painting machines, and slide-out forks for automated warehouses.

Cam Follower with Grease Fitting

With previous products, it was necessary to fabricate jigs and install plugs or grease fittings, but the CF-AB type cam follower with grease fitting has grease fittings installed on both sides, so it can be used immediately after being taken out of the box.
It can be secured from either the head or thread section side of the stud using a hex wrench, and greasing is possible from both directions. As a result, it improves your work efficiency because mounting and maintenance can be performed without being concerned about mounting space.

Selection Support Information

Example of Part Number Structure

CFH Type

CFH-AB type (With grease nipple)

Cautions and Prohibitions

Handling
(1) Do not disassemble each part. It may cause loss of function.
(2) Do not drop or hit the cam follower. It may cause injury or damage. In addition, please note that when shock was applied, the product may lose its function even though there is no visible damage to the external appearance.
(3) When handling the product, wear protective gloves, safety shoes, and the like as necessary to ensure safety.

Precautions for Use
(1) When securing the cam follower, tighten the nut using a torque wrench or similar tool.
(2) Avoid continuous use at temperatures above 80°C. If the temperature exceeds this level, resin and rubber parts may be deformed or damaged.
(3) Be careful to prevent cutting chip, coolant, or other contaminant from entering. Otherwise, it may cause damage.
(4) If cutting chip or other contaminant adheres to the product, please clean it and then reapply lubricant.
(5) Cam followers can bear radial load, so please avoid using them in a way that bears thrust load.
(6) In cases of slight oscillation, it is difficult for an oil film to form on the contact surface between the rolling element and the rolling surface, which may cause fretting. Therefore, please use grease with excellent fretting resistance. In addition, it is recommended to perform a rotating operation of about one full turn periodically to form an oil film on the rolling surface and rolling element.
(7) If the rigidity and accuracy of the mounting component are insufficient, the load on the bearing will be locally concentrated, and bearing performance will be significantly reduced. Therefore, please thoroughly consider the rigidity and accuracy of the housing and base, as well as the strength of the fixing bolts.

Lubrication
(1) Lithium soap-based grease No. 2 is used as the standard grease for cam followers.
(For CFN type, urea-based grease No. 2 is used)
Please replenish grease as needed during use. Avoid reapplying different lubricants. Even if the thickener is the same type of grease, differences in additives and other components may have adverse effects on each other.
(2) Please make sure to apply lubricant between the cam follower and the mating rolling surface before use.
(3) For hex socket head cam followers of CF and CFH24 or larger (excluding models with the -A symbol and those made of stainless steel), a plug is press-fitted into the through hole that connects the bottom of the hex socket and the lubrication hole (⌀d₁, ⌀d₂), preventing grease from leaking out of the hex socket.
When lubricating, be careful not to apply excessive pressure that could cause the plug to come off from the bottom of the hex socket.
(4) When used in locations subject to constant vibration, clean rooms, vacuum, or special environments such as low or high temperatures, please use grease suitable for the specifications and environment.
(5) The consistency of the grease changes depending on the temperature. Please note that changes in consistency will also affect the sliding resistance of the cam follower.
(6) After lubrication, the sliding resistance of the cam follower may increase due to the mixing resistance of the grease. Be sure to perform a break-in operation and allow the grease to fully blend in before operating the machine.
(7) Even with seals, excess grease may splatter around during initial use or immediately after re-lubrication, so please wipe it off as needed before use.
(8) The properties of grease deteriorate and its lubrication performance declines over time, so it is necessary to inspect and replenish the grease according to usage frequency.
(9) Lubrication intervals vary depending on usage conditions and operating environment. Please determine the final lubrication interval and amount based on actual machine operation.

Storage
Please store the cam follower indoors, using MISUMI's packaging and shipping configuration, and avoid high temperatures, low temperatures, and high humidity.
For products stored for a long period, the internal lubricant may have deteriorated over time, so please replenish the lubricant before use.

Disposal
Please dispose of the product appropriately as industrial waste.

: 30; 45; 60

Part Number
CFH6MUU
CFH6UUR
CFH8MR-A
CFH8MUU
CFH8MUUR-A
CFH8UU
CFH8UUR
CFH10
CFH10-1M
CFH10-1M-A
CFH10-1MR
CFH10-1MUUR
CFH10-1UU
CFH10-1UUR
CFH10-1UUR-A
CFH10M-A
CFH10MR-A
CFH10R-A
CFH10UU
CFH10UUR

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Outer Diameter D (mm)	Width C (mm)	Roller Type	Fastening Methods	Cam follower stud screw (mm)	Material	Basic Load Rating Dynamic Rating (kN)	Basic Load Rating Static Rating (kN)	Allowable Rotational Speed (rpm)	Sealing Structure	Track Load Capacity (kN)	Dedicated Grease Fitting Included	Cam Follower Stud Thread (Coarse) (mm)
MYR 140.87	1 Piece(s)		5 Day(s) or more	-	16	11	Cylindrical Outer Ring	With Driver Groove	M6	Stainless Steel	3.59	3.58	25000	Shield Type	3.43	NA	-
MYR 151.74	1 Piece(s)		4 Day(s) or more	10	16	11	Spherical Outer Ring	With Driver Groove	M6	Carbon Steel	3.59	3.58	25000	Shield Type	1.08	NA	-
MYR 147.87	1 Piece(s)		5 Day(s) or more	-	19	11	Spherical Outer Ring	With Head Hexagonal Hole	M8	Stainless Steel	4.17	4.65	20000	No Seal	1.37	-	-
MYR 149.60	1 Piece(s)		5 Day(s) or more	-	19	11	Cylindrical Outer Ring	With Driver Groove	M8	Stainless Steel	4.17	4.65	20000	Shield Type	4.02	NA	-
MYR 193.35	1 Piece(s)		5 Day(s) or more	-	19	11	Spherical Outer Ring	With Head Hexagonal Hole	M8	Stainless Steel	4.17	4.65	20000	With Seal	1.37	-	-
MYR 134.16	1 Piece(s)		4 Day(s) or more	10	19	11	Cylindrical Outer Ring	With Driver Groove	M8	Carbon Steel	4.17	4.65	20000	Shield Type	4.02	NA	-
MYR 157.85	1 Piece(s)		5 Day(s) or more	-	19	11	Spherical Outer Ring	With Driver Groove	M8	Carbon Steel	4.17	4.65	20000	Shield Type	1.37	NA	-
MYR 111.17	1 Piece(s)		5 Day(s) or more	-	22	12	Cylindrical Outer Ring	With Driver Groove	M10	Carbon Steel	5.33	6.78	17000	Open Type	4.7	NA	-
MYR 99.41	1 Piece(s)		39 Day(s) or more	-	26	12	Cylindrical Outer Ring	With Driver Groove	M10	Stainless Steel	5.33	6.78	17000	Open Type	5.49	NA	-
MYR 137.74	1 Piece(s)		5 Day(s) or more	-	26	12	Cylindrical Outer Ring	With Head Hexagonal Hole	M10	Stainless Steel	5.33	6.78	17000	No Seal	5.49	-	-
MYR 116.80	1 Piece(s)		44 Day(s) or more	-	26	12	Spherical Outer Ring	With Driver Groove	M10	Stainless Steel	5.33	6.78	17000	Open Type	2.06	NA	-
MYR 191.97	1 Piece(s)		5 Day(s) or more	-	22	12	Spherical Outer Ring	With Driver Groove	M10	Stainless Steel	5.33	6.78	17000	Shield Type	2.06	NA	-
MYR 144.04	1 Piece(s)		11 Day(s) or more	10	26	12	Cylindrical Outer Ring	With Driver Groove	M10	Carbon Steel	5.33	6.78	17000	Shield Type	5.49	NA	-
MYR 174.64	1 Piece(s)		4 Day(s) or more	10	26	12	Spherical Outer Ring	With Driver Groove	M10	Carbon Steel	5.33	6.78	17000	Shield Type	2.06	NA	-
MYR 190.85	1 Piece(s)	Available	11 Day(s) or more	10	26	12	Spherical Outer Ring	With Head Hexagonal Hole	M10	Carbon Steel	5.33	6.78	17000	With Seal	2.06	-	-
MYR 184.36	1 Piece(s)	Available	12 Day(s) or more	-	22	12	Cylindrical Outer Ring	With Head Hexagonal Hole	M10	Stainless Steel	5.33	6.78	17000	No Seal	4.7	-	M8×1.25
MYR 154.68	1 Piece(s)		5 Day(s) or more	-	22	12	Spherical Outer Ring	With Head Hexagonal Hole	M10	Stainless Steel	5.33	6.78	17000	No Seal	1.67	-	-
MYR 138.73	1 Piece(s)	Available	11 Day(s) or more	10	22	12	Spherical Outer Ring	With Head Hexagonal Hole	M10	Carbon Steel	5.33	6.78	17000	No Seal	1.67	-	-
MYR 134.16	1 Piece(s)		5 Day(s) or more	-	22	12	Cylindrical Outer Ring	With Driver Groove	M10	Carbon Steel	5.33	6.78	17000	Shield Type	4.7	NA	-
MYR 163.23	1 Piece(s)		5 Day(s) or more	-	22	12	Spherical Outer Ring	With Driver Groove	M10	Carbon Steel	5.33	6.78	17000	Shield Type	1.67	NA	-

Basic Information

Product Category	Cam Followers	Cam Followers Type	Eccentricity	Size Standard	Metric
Roller Lining	No	Axis	Presence	Rolling Guide Method	With Gage

Configure

20 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Outer Diameter D(mm)
16

19

22

26
Clear
Width C(mm)
11

12
Clear
Roller Type
- Spherical Outer Ring
- Cylindrical Outer Ring
Clear
Fastening Methods
- With Head Hexagonal Hole
- With Driver Groove
Clear
Cam follower stud screw(mm)
M6

M8

M10
Clear
Material
- Carbon Steel
- Stainless Steel
Clear
Allowable Rotational Speed(rpm)
17000

20000

25000
Clear
Sealing Structure
- No Seal
- Open Type
- Shield Type
- With Seal
Clear
Track Load Capacity(kN)
1.08

1.37

1.67

2.06

3.43

4.02

4.7

5.49
Clear
Dedicated Grease Fitting Included
- NA
Clear
Cam Follower Stud Thread (Coarse)(mm)
- M8×1.25
Clear
type
- CFH
- CFH-M
- CFH-M-A
- CFH-MR
- CFH-MR-A
- CFH-R
- CFH-R-A
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

5 Day(s) or Less

11 Day(s) or Less

12 Day(s) or Less

39 Day(s) or Less

44 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Hex socket head cam follower CF-A type
THK

Standard Price : MYR 87.45-

Days to Ship : 5 Day(s) or more
Cam Follower CFH-AB Type
THK

Standard Price : MYR 124.07-

Days to Ship : 5 Day(s) or more
Standard Type Cam Follower CF/CF-AB Type
THK

Standard Price : MYR 208.37-

Days to Ship : 5 Day(s) or more
Cam FollowerCF Type
THK

Standard Price : MYR 58.65-

Days to Ship : 2 Day(s) or more
Roller Follower NART-R Type, NART-VR Type (Full Roller Type)
THK

Standard Price : MYR 145.86-

Days to Ship : 4 Day(s) or more
Cam follower with lubrication tapped hole, CFT type
THK

Standard Price : MYR 123.27-

Days to Ship : 5 Day(s) or more
Roller follower NAST-ZZ type (separable type, with side plates)
THK

Standard Price : MYR 71.78-

Days to Ship : 4 Day(s) or more
Eccentric Stud Cam Follower
IKO

Standard Price : MYR 111.86-

Days to Ship : 4 Day(s) or more
Cam Follower / Solid Eccentric Cam Follower - Flat
MISUMI

Standard Price : MYR 84.14-

Days to Ship : 2 Day(s) or more
Easy-Mount Cam Follower CF-SFU Type
THK

Standard Price : MYR 83.32-

Days to Ship : 5 Day(s) or more
Cam Follower KR With Retainer
NTN

Standard Price : MYR 75.06-

Days to Ship : 4 Day(s) or more
Full-Roller Type Cam Follower KRV
NTN

Standard Price : MYR 106.36-

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Cam FollowerCFH Type

(i)Caution

Drawing

Product Specification

Specifications Table

Product Feature Details

Structure and Features

Cam Follower with Grease Fitting

Selection Support Information

Example of Part Number Structure

Cautions and Prohibitions

Basic Information

Configure

Specification/Dimensions

Outer Diameter D(mm)

Width C(mm)

Roller Type

Fastening Methods

Cam follower stud screw(mm)

Material

Allowable Rotational Speed(rpm)

Sealing Structure

Track Load Capacity(kN)

Dedicated Grease Fitting Included

Cam Follower Stud Thread (Coarse)(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm