Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ROSTA tensioner unit with pulley idler

Volume Discount

MIKI PULLEY

By installing an aluminum alloy roller on the ROSTA tensioner unit SE model, it can be used as a belt tensioner.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Drawing

[RSE]

*M: Filter condition "Screw size" M1: Filter condition "Screw size 2"

■ For details of the tensioner section, please refer to the SE model in the diagram below.

[SE]

ROSTA tensioner unit with pulley idler outline drawing 02

[Pulley idler RA]

ROSTA tensioner unit with pulley idler outline drawing 03

Product Specification

Part number	Load range F [N]	Maximum displacement S1 [mm]	Maximum displacement S2 [mm]	Compatible belt(s)	Maximum rotating speed [min-1]	Weight [kg]
RSE-11	0 to 96	40	30	A	8,000	0.25
RSE-15	0 to 135	50	40	B	8,000	0.60
RSE-18	0 to 350	50	40	B	8,000	0.80
RSE-27	0 to 810	65	50	C	6,000	2.15
RSE-38	0 to 1,500	88	70	-	5,000	4.75
RSE-45	0 to 2,650	113	90	-	4,500	8.30

*The load range is for the normal position specification.
The load range for the hard position is approximately 1.25 times the load range for the normal position.

Design Confirmation Points

■ Selection

Clarify the belt size, the proper belt tension (required tension), and the belt deflection angle θ. Then, using the following simple selection graph, select the size at the intersection of either the belt size or proper tension and the belt deflection angle θ. In addition, the proper belt tension varies depending on the number of belts.

Specifications Table

[RSE]

Unit: mm

Part number	A	B	D	D1	G	H1	L1	L2	L3	M	M1
RSE-11	51 (-0.5 to +1)	20	35	30	5	80	35	8	8	M6 × 20	M8 x 45
RSE-15	64 (-0.5 to +1)	25	45	40	5	100	45	11	11	M8 x 25	M10 x 60
RSE-18	79 (-0.5 to +1.5)	30	58	40	7	100	45	13	9	M10 x 30	M10 x 60
RSE-27	108 (-0.5 to +2)	50	78	60	8	130	60	14	11	M12 x 40	M12 x 75
RSE-38	140 (-0.5 to +2)	60	95	80	10	175	90	18	17	M16 x 40	M20 x 100
RSE-45	200 (-0.5 to +2)	70	115	90	12	225	135	22	17	M20 x 50	M20 x 140

■ For detailed tensioner dimensions, please refer to the SE model table below.

[SE]

Unit: mm

Part number	A	B	D	E	G	H1	H2	L	N	P	U	T	M
SE-11	51 (-0.5 to +1)	20	35	6	5	80	60	90	22	8	16.5	8.5	M6 × 20
SE-15 / SE-I-15	64 (-0.5 to +1)	25	45	8	5	100	80	112.5	30	8.5	20.8	10.5	M8 x 25
SE-18 / SE-I-18	79 (-0.5 to +1.5)	30	58	10.5	7	100	80	115	35	8.5	25.3	10.5	M10 x 30
SE-27 / SE-I-27	108 (-0.5 to +2)	50	78	15	8	130	100	155	52	10.5	34.3	12.5	M12 x 40
SE-38 / SE-I-40	140 (-0.5 to +2)	60 (70)	95 (100)	15	10	175	140	205	66 (70)	12.5 (12)	42.0 (41.5)	20.5	M16 x 40
SE-45	200 (-0.5 to +2)	70	115	18	12	225	180	260	80	12.5	52.0	20.5	M20 x 50

*The dimensions in parentheses for SE-38 and SE-I-40 refer to the dimensions of SE-I-40.

[Pulley idler RA]

Unit: mm

Part number	Applicable Tensioner	A	B	C	D	d	d1	E	L1	bearing
RA-11	RSE-11	13	7	9	30	8	12	3	35	608ZZ
RA-15/18	RSE-15/18	16	9	13	40	10	15	6	45	6200ZZ
RA-27	RSE-27	22	12	16	60	12	18	6	60	6301ZZ
RA-38	RSE-38	39	15	22	80	20	28	8	90	6304ZZ
RA-45	RSE-45	48	15	60	90	20	28	10	135	6304ZZ

*Combine with the Rosta tensioner SE model.
*Bolts and nuts for fixing the pulley idler are included as accessories.
*Material: aluminum alloy

Usage Example

Usage Examples

■ Idler Settings

ROSTA tensioner unit with pulley idler Usage Method 01

Always set the idler on the slack side of the chain or belt before use. For forward and reverse rotation, set the idler on both sides before use.

ROSTA tensioner unit with pulley idler Usage Method 02

When applying tension from the outside of the chain or belt, set the idler on the small sprocket (pulley) side before use.
On the other hand, when applying tension from the inside, please set the idler on the side of the larger sprocket (pulley).

For chain tensioners, make sure that at least three teeth of the sprocket idler are engaged with the chain.
If excessive tension is applied to the chain or belt, the lifespan of the chain, belt, and bearing will be significantly reduced.
Please allow for appropriate slack during use. A setting angle of approximately 10 to 15° is provided as a reference.
When applying tension from the inside of the V-belt, please use a V-pulley idler. For timing belts, please use a timing idler.
Since the tensioner fixing bolts and idler fixing bolts use strength class 8.8, please tighten them to the tightening torque specified below.

■ Tensioner Fixing Bolt

Part number	Bolt Nominal Diameter × Length	Proper Tightening Torque [N⋅m]
RSE-11	M6 × 20	10
RSE-15	M8 x 25	25
RSE-18	M10 x 30	49
RSE-27	M12 x 40	86
RSE-38	M16 x 40	210
RSE-45	M20 x 50	410

■ Idler Mounting Bolt

Part number	Bolt Nominal Diameter × Length	Proper Tightening Torque [N⋅m]
RSE-11	M8 x 45	20
RSE-15	M10 x 60, 55	20
RSE-18	M10 x 60, 55	20
RSE-27	M12 × 75,80	35
RSE-38	M20×100,100	160
RSE-45	M20 × 140,130	160

[Mounting]

ROSTA tensioner unit with pulley idler Usage Method 03

Align the positioning notch on the flange part of the Rosta tensioner with the designated position as specified in the design. If you mark the support plate or other mounting surface for the Rosta tensioner in advance to correspond with this notch, mounting will be easier. Additionally, this notch can also be used as an anti-rotation feature.

ROSTA tensioner unit with pulley idler Usage Method 04

Attach the Rosta tensioner to the machine using the included tensioner mounting bolts. In this case, please check the strength of the machine mounting section and ensure that the mounting surface is flat. If the Rosta tensioner cannot be mounted directly to the machine, please use a bracket (WS/WD model).

ROSTA tensioner unit with pulley idler Usage Method 05

Hold the outer shell of the Rosta tensioner with a wrench, tighten the included tensioner fixing bolt, and secure the Rosta tensioner. When using the Rosta tensioner near its allowable angle, use a torque wrench and tighten to the specified torque.

ROSTA tensioner unit with pulley idler Usage Method 06

Attach the sprocket idler to the Rosta tensioner. First, securely fix the idler fixing bolt to the arm with the lock nut. Next, adjust the sprocket idler within the specified mounting range (catalog Y dimension), align it with the chain line, and then secure it with two nuts.

ROSTA tensioner unit with pulley idler Usage Method 07

Always set the idler on the inside of the arm when using. If you must set it on the outside of the arm, install it as close to the arm as possible. In this case, the allowable torsion angle is Max. ±15° or less.

*Rubber (NR) has insufficient resistance to oil and grease, so please avoid contact with these substances.

Product Feature Details

· Maintains proper belt tension and automatically absorbs chain slack, vibration, and shock
The basic structure consists of an arm pre-attached inside the Rosta suspension unit, with the outer shell in a flange type shape. Installation requires only a single center bolt, making it easy to maintain proper belt tension, absorb chain slack, and install components such as conveyor belt scrapers and pressure rollers.

: 30; 45; 60

Part Number
RSE-11
RSE-15
RSE-18
RSE-27
RSE-38
RSE-45

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	A (㎜)	B (㎜)	D (㎜)	Thread Size	Screw size 2
MYR 600.02	1 Piece(s)	Available	5 Day(s) or more	10	51	20	35	M6×20	M8×45
MYR 678.88	1 Piece(s)	Available	8 Day(s) or more	10	64	25	45	M8×25	M10×60
MYR 757.86	1 Piece(s)	Available	19 Day(s) or more	10	79	30	58	M10×30	M10×60
MYR 1,224.35	1 Piece(s)		5 Day(s) or more	10	108	50	78	M12×40	M12×75
MYR 1,995.34	1 Piece(s)		19 Day(s) or more	10	140	60	95	M16×40	M20×100
MYR 3,155.57	1 Piece(s)		19 Day(s) or more	10	200	70	115	M20×50	M20×140

Basic Information

Type	Tensioner/Idler Set	Applications	Belt

Configure

6 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

A(㎜)
51

64

79

108

140

200
Clear
B(㎜)
20

25

30

50

60

70
Clear
D(㎜)
35

45

58

78

95

115
Clear
Thread Size
- M6×20
- M8×25
- M10×30
- M12×40
- M16×40
- M20×50
Clear
Screw size 2
- M8×45
- M10×60
- M12×75
- M20×100
- M20×140
Clear
type
- RSE
Clear

Days to Ship

All

5 Day(s) or Less

8 Day(s) or Less

19 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

ROSTA Tensioner Unit SE Model
MIKI PULLEY

Standard Price : MYR 350.74-

Days to Ship : 5 Day(s) or more
Base Tightener, (Rotary Type, Auto-Tension Type) (BAT-R, BAT-A)
IMAO

Standard Price : MYR 515.11-

Days to Ship : 5 Day(s) or more
ROSTA Tensioner Unit with Sprocket Idler
MIKI PULLEY

Standard Price : MYR 538.00-

Days to Ship : 5 Day(s) or more
ROSTA Tensioner Unit Option, Pulley Idler, RA Model
MIKI PULLEY

Standard Price : MYR 240.47-

Days to Ship : 5 Day(s) or more
Auto Slide Tightener (AST80-SUS)
IMAO

Standard Price : MYR 1,057.63-

Days to Ship : 9 Day(s)
Flex Holder, YSA
NABEYA BI-TECH

Standard Price : MYR 171.77-

Days to Ship : 5 Day(s) or more
Auto Swing Tightener (TC-ABN)
IMAO

Standard Price : MYR 337.23-

Days to Ship : 8 Day(s) or more
M/HITACHI Floating Chain Tensioner SI
KONISHI

Standard Price : MYR 543.46-

Days to Ship : 4 Day(s) or more
Angle Tightener, (Rotary Type, Auto-Tension Type) (ANT-R,ANT-A)
IMAO

Standard Price : MYR 522.18-

Days to Ship : 9 Day(s) or more
Flange Tightener, (Rotary Type, Auto-Tension Type) (FLT-R, FLT-A)
IMAO

Standard Price : MYR 493.46-

Days to Ship : 9 Day(s)
Auto Rotation Tightener (TC-PX)
IMAO

Standard Price : MYR 224.65-

Days to Ship : 8 Day(s) or more
Flex Holder_YSB
NABEYA BI-TECH

Standard Price : MYR 317.36-

Days to Ship : 5 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

ROSTA tensioner unit with pulley idler

Drawing

Product Specification

Design Confirmation Points

Specifications Table

Usage Example

Usage Examples

Product Feature Details

Basic Information

Configure

Specification/Dimensions

A(㎜)

B(㎜)

D(㎜)

Thread Size

Screw size 2

type

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm