(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
for Clean Environment, Tube Fitting PP Type Elbow【1-50 Pieces Per Package】 (Part Numbers)
- Volume Discount
PP resin is used for the main body material, making it ideal for clean environments.
Japanese Only
Part Number
Configured Part Number is shown.
Specifications Of PP Type Tube Fitting For Clean Environments - Elbow
Appearance of PP Type Tube Fitting For Clean Environments - Elbow
Dimensional drawing
| Usable Fluids | Air, water (see condition *1), other (see condition *1) |
|---|---|
| Maximum Operating Pressure | 1.0 MPa (at 0 to 20°C)*2 |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 80°C (no freezing) |
*1. When the specified fluid is water or other chemicals, the following conditions must be observed.
- 1. When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- 2. Be sure to use an insert ring when using water or other liquids.
- 3. For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
*2. For the maximum operating pressure when the operating temperature exceeds 20°C, see "Relationship between operating temperature and maximum operating pressure" below.
Relationship between operating temperature and maximum operating pressure
- Maximum operating pressure (MPa)
- Operating temperature (°C)
Formats
| Format | Tube Outer Diameter φD | R | A | B | L | φP | Tube End C | E | Hex H | Mass (g) | Effective Cross-Sectional Area (mm2) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PPL4-01 (5) (6) (7) | 4 | R1/8 | 8 | 23.3 | 24.3 | 10 | 15 | 18.1 | 10 | 4 | 3.4 |
| PPL4-02 (5) (6) (7) | R1/4 | 11 | 26.3 | 25.3 | 14 | 4.5 | |||||
| PPL6-01 (5) (6) (7) | 6 | R1/8 | 8 | 25 | 27.3 | 12.5 | 16.9 | 19.9 | 12 | 5 | 8.7 |
| PPL6-02 (5) (6) (7) | R1/4 | 11 | 28 | 28.2 | 14 | 5.5 | |||||
| PPL6-03 (5) (6) (7) | R3/8 | 12 | 29.8 | 29.7 | 17 | 6.5 | |||||
| PPL8-01 (5) (6) (7) | 8 | R1/8 | 8 | 28 | 31.3 | 14.5 | 18.1 | 22.7 | 14 | 7 | 17.2 |
| PPL8-02 (5) (6) (7) | R1/4 | 11 | 31 | 32.2 | 7.5 | ||||||
| PPL8-03 (5) (6) (7) | R3/8 | 12 | 32.8 | 33.7 | 17 | 8.5 | |||||
| PPL10-02 (5) (6) (7) | 10 | R1/4 | 11 | 36 | 38.7 | 17.5 | 20.4 | 26.4 | 17 | 12 | 25.9 |
| PPL10-03 (5) (6) (7) | R3/8 | 12 | 37 | 39.4 | 13 | ||||||
| PPL12-03 (5) (6) (7) | 12 | R3/8 | 12 | 39 | 43.2 | 21 | 23.6 | 29.6 | 22 | 18 | 37.6 |
| PPL12-04 (5) (6) (7) | R1/2 | 15 | 42 | 44.3 | 19 |
Units: mm
- *L dimensions are reference dimensions after tightening with screws.
- *For (5) in the order format, input -F (FMK) or -HN (HNBR) only if you want to change the sealing rubber material. (If you want the clean washing specification, you cannot change the material to FKM.)
- *For (6) in the order format, input -TP if you want the sealing tape specification.
- *For (7) in the order format, input -C if you want the clean room packaging specification or -UC if you want the clean washing specification.
| Part Number |
|---|
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Fitting Type | Applicable Fluid | Screw Mounting, Direction | Body Material | Types | Elbows | Thread Material | Application | Seal Material | Operating Temperature (°C) | Applicable Tube O.D.1 (φ) | Nominal of Thread 1 | Package Specifications | Thread Part Seal Specification |
|---|
Loading...
Basic Information
| Connection Screw Type 1 | R |
|---|
Specification/Dimensions
-
Fitting Type
- Screw Mount Direction
-
Applicable Fluid
- Water
- Air
- Chemicals、Solvent
- Mixed Gas
-
Screw Mounting, Direction
- Elbow
-
Body Material
- PP Resin
-
Types
- One-Touch Couplings
-
Elbows
- Male Elbows
-
Thread Material
- PP Resin
-
Application
- Clean circumstance
- Foods・Drug-Related
-
Seal Material
- Fluororubber
- EPDM
- Fluororubber
-
Applicable Tube O.D.1(φ)
-
Nominal of Thread 1
- 1/2
- 1/4
- 1/8
- 3/8
-
Package Specifications
- Clean Room Packaging Specifications
- Regular Packaging Specifications
-
Thread Part Seal Specification
- Sealing Tape Specifications
- Standard Specifications
-
type
- PPL
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 16 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- One-Touch Couplings - L-Connectors
- Tube Fitting Union A for General Piping
- For General Piping, Tube Fitting, Union Elbow
- Distribution, Main Block
- Chemifit C1 Series, Blank Plug BC-C1
- Reducer Nipple KQ2N One-Touch Fitting KQ2 Series
- Color Cap KQ2 Series, One-Touch Fitting
- Female Connector 10-KGF Stainless Steel One-Touch Fitting, KG Series.
Customers Who Viewed This Item Also Viewed
-
PP Type Tube Fitting for Clean Environment, StraightPISCO
Standard Price : MYR 19.12-
Days to Ship : 1 Day(s) or more
-
For Clean Environment, PP Type Tube Fitting, Elbow, SUS304 Threaded SectionPISCO
Standard Price : MYR 45.38-
Days to Ship : 1 Day(s) or more
-
For Clean Environments, PP Type Tube Fitting, Union Straight ReducersPISCO
Standard Price : MYR 37.75-
Days to Ship : 1 Day(s) or more
-
for Chemicals, Tube Fitting Chemical Type ElbowPISCO
Standard Price : MYR 33.77-
Days to Ship : 1 Day(s) or more
-
For Clean Environment, Tube Fitting PP Type, With Union StraightPISCO
Standard Price : MYR 37.35-
Days to Ship : 4 Day(s) or more
-
For Clean Environment, PP Type Tube Fitting, Straight Threaded Section SUS304PISCO
Standard Price : MYR 41.10-
Days to Ship : 1 Day(s) or more
-
Tube Fitting for Chemicals, Chemical Type, StraightPISCO
Standard Price : MYR 19.81-
Days to Ship : 1 Day(s) or more
-
Tube Fitting Polypropylene Type Union Y for Clean EnvironmentsPISCO
Standard Price : MYR 53.23-
Days to Ship : 4 Day(s) or more
-
Tube Fitting for Clean Environments, PP Type, Union ElbowPISCO
Standard Price : MYR 37.38-
Days to Ship : 4 Day(s) or more
-
Quick-Connect Fitting for Clean Environment Friendly Piping, Elbow, Thread Section Material PolypropyleneMISUMI
Standard Price : MYR 18.69-
Days to Ship : 2 Day(s) or more
-
One-Touch Couplings for Clean Applications - Union ElbowsMISUMI
Standard Price : MYR 33.37-
Days to Ship : 4 Day(s) or more
-
Quick-Connect Fitting for Clean Environment Friendly Piping, Elbow, Thread Section Material SUS304MISUMI
Standard Price : MYR 29.91-
Days to Ship : 2 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy