(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
ECORON-S (ECS-32-L10)
- Volume Discount
Made from polyolefin resin. Has good chemical resistance and can be used with with foods. Strong against breaking or crushing, making it suitable for vacuum applications. * Indoor
Part Number
Configured Part Number is shown.
ECS-32-L10
- Download
Product Details - CAD Data unavailable
Product Specifications
External Appearance
Pressure-resistant hose for conveying and transporting various food, chemicals, solvents, oil, etc.
Structure
Specifications
| Fluid | Water (industrial water), beverages, potable water food, beverages (including oils and fats), chemicals mineral oil, animal and vegetable oil, powder, air, pure water |
|---|---|
| Function | Pressure feeding: Most suitable, Suction: Most suitable, Chemical: Suitable, Oil-resistant mineral oil: Suitable, Oil-resistant animal and vegetable oil: Suitable, Low elution: ○ Low odor: Suitable, Prevention of bending and crushing: Most suitable, Flexibility: ○ |
| Main material | Poly-Olefin-Based Resin + Styrene-Based Resin |
| Reinforcements | Hard steel wire |
| Inner Diameter | 25 mm to 50 mm |
| Operating temperature range | -5°C to 60°C |
| Specifications | Dedicated to indoor use |
| Laws and regulations | Compliant with revised RoHS2 regulations. Compliant with the Food Sanitation Act of Japan (PL system), Notification No. 196 of 2020 Ministry of Health, Labour and Welfare of Japan |
Specifications Table
Color: milky white
*1 -0.1 MPa is an approximation. It may not be possible to use under certain conditions.
Product features details
Non-PVC hose suitable for conveying and transporting chemicals
- Polyolefin resin inner surface of the hose provides excellent chemical resistance and long lifespan.
- It can be used for suction and pressure feeding. Good shape retention with high resistance to hose bending and crushing
- It is environmentally friendly as no harmful gases such as dioxins are emitted even when burned
- There is minimal hose leachate contamination of fluid and no contamination concerns
With low odor, it can be used for transporting food and beverages
- Safe and free from the characteristic odor of PVC
- Highly transparent, you can check the fluid and feel safe
- It can also be used for food applications (hose for conveyance and transportation)
* Please note that this is dedicated for indoor use.
Compliant with laws and regulations to ensure safe and secure.
- Compliant with the Food Sanitation Act of Japan (Compliant with Ministry of Health, Labour and Welfare of Japan No. 196 in 2020 "PL system")
- Compliant with revised RoHS2 regulations.
* This hose does not use phthalate plasticizers.
Improved productivity and safety with dedicated fittings.
- Structure with very little liquid pooling. Dedicated fittings can reduce disassembly and cleaning work of food hose piping
- Various types of dedicated fittings are easy to install, prevent fluid leakage and hose disconnection for safe and secure.
Selection procedure / points
Selection support information
Increased safety and reliability in combination with fittings.
Hygienical
Structure that prevents liquid accumulation
Easy work
Easy hose connection
Easy to tighten.
Cap nut type
Securely fastened with a sleeve
Preventing hose disconnection and fluid leakage
Cautions/prohibitions
1. Do not use it outdoors or in areas constantly exposed to direct sunlight. Ultraviolet rays may cause stickiness and cracking on the surface.
2. Warning: Use it within the operating temperature range and operating pressure range. When using Ecoron S hose under negative pressure, depending on the application and conditions (temperature and movement),
it may not be possible to use. Please refer to the "Vacuum Pneumatic Reference Range (see Fig. 1 on the website)" as a guideline to the negative pressure operating range.
3. It is expected that the compounding agent, etc., may be extracted or eluted from the hose depending on the conditions of use, so check the usage conditions and the effect on the product before use.
4. Do not use it with fuel oil (heavy oil, light oil, kerosene, gasoline, etc.) or solvents. Some lubricant oils cannot be used, so please be sure to consult with the manufacturer before use.
5. If using it for drinking water or food, please flush the inside of the hose with water before use. * Clean with hot water (80°C or less) for up to 30 minutes at a pressure of 0.1 MPa or less.
6. The hose expands and contracts due to internal pressure, so please allow some leeway when piping.
7. When pressurizing, open and close the valve slowly to avoid *1 impact pressure.
8. Hose *3 Please use it with a minimum bending radius or more. Use of the hose with less than the minimum bending radius will result in the hose bending and reduced pressure-resistant.
9. When used for powder or granular materials, the hose bending radius should be as large as possible, as it may be subject to abrasion depending on conditions.
10. The outer sheath layer is not oil resistance, so be careful not to get oil on the hose outer sheath.
11. Do not use the product in an extremely bent state near the fittings.
12. Do not directly touch or bring it close to open flames.
13. Do not run over the hose with vehicles, etc.
14. Do not use the hose in a crushed state.
15. Do not apply hard, sharp objects such as steel material to the hose or rub it hard against it.
16. Warning: Do not energize it. To do so may result in hose rupture or electric shock.
17.Do not allow hoses or fittings to come into contact with fluids (food, etc.).
Fluid may permeate the hose reinforcement layer or remain in the fitting, causing the growth (adherence) of bacteria and deterioration of the hose.
Additionally, there is a risk of contamination with dust, hose fragments (reinforcing material), and printing ink on the outside.
| Part Number |
|---|
| ECS-32-L10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Nominal I.D. d | Outer Dia. D (Ø) | Minimum Bending Radius (mm) | Standard Length (m) |
|---|---|---|---|---|---|---|---|---|---|
MYR 1,212.75 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | 32 | 41 | 330 | 10 |
Loading...
Basic Information
| Properties | Pressure Resistance / Oil Resistance / Chemical Resistance / Low Elution / Transparency / Low Odor / Shape Retentivity / Vacuum / Other features | Applicable Fluid / Usage | Water / Chemical / Powder (except for food) / Air / Foods / Oil(Mineral Oil) | Color | Milky White |
|---|---|---|---|---|---|
| Cutting Service Usage | Presence | Mounting Metal Fittings | No | Operating Temperature Range(°C) | -5::60 |
| Operating Pressure Range(MPa) | -0.1::0.1 |
Please check the type/dimensions/specifications of the part ECS-32-L10 in the ECORON-S series.
Specification/Dimensions
-
type
- ECS
-
Nominal I.D. d
-
Outer Dia. D(Ø)
-
Minimum Bending Radius(mm)
-
Standard Length(m)
Days to Ship
-
- All
- 7 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| ECS-25-L11 |
| ECS-25-L12 |
| ECS-25-L13 |
| ECS-32-L11 |
| ECS-32-L12 |
| ECS-32-L13 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Nominal I.D. d | Outer Dia. D (Ø) | Minimum Bending Radius (mm) | Standard Length (m) |
|---|---|---|---|---|---|---|---|---|---|
MYR 843.36 | 1 Piece(s) | 13 Day(s) or more | 10 | 25 | 33 | 180 | 11 | ||
MYR 918.92 | 1 Piece(s) | 13 Day(s) or more | 10 | 25 | 33 | 180 | 12 | ||
MYR 994.48 | 1 Piece(s) | 13 Day(s) or more | 10 | 25 | 33 | 180 | 13 | ||
MYR 1,332.80 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | 32 | 41 | 330 | 11 | |
MYR 1,452.85 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | 32 | 41 | 330 | 12 | |
MYR 1,572.90 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | 32 | 41 | 330 | 13 |
Additional Products in this Category
- PAINT
- Blade Hose (Made of Polyurethane)
- Flexible Fluorine Hose (Reinforced Type)
- Pressure Hose
- Water Resistant Polyurethane Blade Hose FH
- Kuroronet
- Industrial Hose Super Tom Flex Hose
- Hose for General Delivery/Suction Neopearl®
Customers Who Viewed This Item Also Viewed
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy