(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
TSC Series Carbide Ball End Mill 2-Flute / Short Type (TSC-BEM2S2.4)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
[Features]
·Good finish can be expected for surface coarse of workpiece after processing
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- TS
- General Steel
- 2 Flutes
- S (Short)
Part Number
Configured Part Number is shown.
TSC-BEM2S2.4
| Part Number |
|---|
| TSC-BEM2S2.4 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Inventory Classification | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 289.82 | 1 Piece(s) | Available | 4 Day(s) or more | 2.4 | 6 | 50 | - | 6 | ±0.005 | Stocked Product | 4.8 | 1 | 10° |
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Under Neck Angle θ |
Figure | ||
| Tip R |
Shank Diameter d |
|||||||
| TSC-BEM2S | 0.05 | - | 3 | 0.2 | 0.1 | 40 | 10° | 1 |
| 0.1 | - | 3 | 0.4 | 0.2 | 40 | 10° | 1 | |
| 0.1 | 6 | 6 | 0.4 | 0.2 | 50 | 15° | 1 | |
| 0.15 | - | 3 | 0.6 | 0.3 | 40 | 10° | 1 | |
| 0.2 | - | 3 | 0.8 | 0.4 | 40 | 10° | 1 | |
| 0.2 | 6 | 6 | 0.8 | 0.4 | 50 | 15° | 1 | |
| 0.25 | - | 3 | 1 | 0.5 | 40 | 10° | 1 | |
| 0.3 | - | 3 | 1.2 | 0.6 | 40 | 10° | 1 | |
| 0.3 | 6 | 6 | 1.2 | 0.6 | 50 | 15° | 1 | |
| 0.35 | - | 3 | 1.4 | 0.7 | 40 | 10° | 1 | |
| 0.4 | - | 3 | 1.6 | 0.8 | 40 | 10° | 1 | |
| 0.4 | 6 | 6 | 1.6 | 0.8 | 50 | 15° | 1 | |
| 0.45 | - | 3 | 1.8 | 0.9 | 40 | 10° | 1 | |
| 0.5 | - | 4 | 2 | 1 | 40 | 10° | 1 | |
| 0.5 | 6 | 6 | 2 | 1 | 50 | 15° | 1 | |
| 0.55 | - | 4 | 2.2 | 1.1 | 40 | 10° | 1 | |
| 0.6 | - | 4 | 2.4 | 1.2 | 40 | 10° | 1 | |
| 0.65 | - | 4 | 2.6 | 1.3 | 40 | 10° | 1 | |
| 0.7 | - | 4 | 2.8 | 1.4 | 40 | 10° | 1 | |
| 0.75 | - | 4 | 3 | 1.5 | 40 | 10° | 1 | |
| 0.75 | 6 | 6 | 3 | 1.5 | 50 | 15° | 1 | |
| 0.8 | - | 4 | 3 | 1.6 | 40 | 10° | 1 | |
| 0.85 | - | 4 | 3 | 1.7 | 40 | 10° | 1 | |
| 0.9 | - | 4 | 3 | 1.8 | 40 | 10° | 1 | |
| 0.95 | - | 4 | 3 | 1.9 | 40 | 10° | 1 | |
| 1 | - | 4 | 3 | 2 | 40 | 10° | 1 | |
| 1 | 6 | 6 | 3 | 2 | 50 | 15° | 1 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a tip (R) and shank diameter (d).
| Model Number | Shank Diameter d |
Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Under Neck Angle θ |
Figure | ||
| Tip R |
Shank Diameter d |
|||||||
| TSC-BEM2S | 1.05 | - | 4 | 3 | 2.1 | 40 | 10° | 1 |
| 1.1 | - | 4 | 3 | 2.2 | 40 | 10° | 1 | |
| 1.15 | - | 4 | 3 | 2.3 | 40 | 10° | 1 | |
| 1.2 | - | 4 | 3 | 2.4 | 40 | 10° | 1 | |
| 1.25 | - | 4 | 3.5 | 2.5 | 40 | 10° | 1 | |
| 1.3 | - | 4 | 3.5 | 2.6 | 40 | 10° | 1 | |
| 1.4 | - | 4 | 3.5 | 2.8 | 40 | 10° | 1 | |
| 1.45 | - | 4 | 3.5 | 2.9 | 40 | 10° | 1 | |
| 1.5 | - | 4 | 4 | 3 | 40 | 10° | 1 | |
| 1.5 | 6 | 6 | 4 | 3 | 60 | 10° | 1 | |
| 1.55 | - | 4 | 4 | 3.1 | 40 | 10° | 1 | |
| 1.6 | - | 4 | 4 | 3.2 | 40 | 10° | 1 | |
| 1.65 | - | 4 | 4 | 3.3 | 40 | 10° | 1 | |
| 1.7 | - | 4 | 4 | 3.4 | 40 | 10° | 1 | |
| 1.75 | - | 4 | 5 | 3.5 | 40 | 10° | 1 | |
| 1.8 | - | 4 | 5 | 3.6 | 40 | 10° | 1 | |
| 1.85 | - | 4 | 5 | 3.7 | 40 | 10° | 1 | |
| 1.9 | - | 4 | 5 | 3.8 | 40 | 10° | 1 | |
| 2 | 4 | 4 | 6 | 4 | 50 | - | 2 | |
| 2 | - | 6 | 6 | 4 | 50 | 10° | 1 | |
| 2.15 | - | 6 | 6 | 4.3 | 50 | 10° | 1 | |
| 2.2 | - | 6 | 6 | 4.4 | 50 | 10° | 1 | |
| 2.3 | - | 6 | 6 | 4.6 | 50 | 10° | 1 | |
| 2.35 | - | 6 | 6 | 4.7 | 50 | 10° | 1 | |
| 2.4 | - | 6 | 6 | 4.8 | 50 | 10° | 1 | |
| 2.5 | - | 6 | 8 | 5 | 50 | 10° | 1 | |
| 2.6 | - | 6 | 8 | 5.2 | 50 | 10° | 1 | |
| 2.75 | - | 6 | 8 | 5.5 | 50 | 10° | 1 | |
| 3 | - | 6 | 10 | 6 | 60 | - | 2 | |
| 3.5 | - | 8 | 12 | 7 | 60 | 10° | 1 | |
| 4 | - | 8 | 13 | 8 | 60 | - | 2 | |
| 4.5 | - | 10 | 14 | 9 | 70 | 10° | 1 | |
| 5 | - | 10 | 15 | 10 | 80 | - | 2 | |
| 5.5 | - | 12 | 15 | 11 | 80 | 10° | 1 | |
| 6 | - | 12 | 15 | 12 | 80 | - | 2 | |
| 7 | - | 12 | 15 | 14 | 80 | - | 3 | |
| 8 | - | 16 | 20 | 16 | 150 | - | 2 | |
| 10 | - | 20 | 25 | 20 | 150 | - | 2 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a tip (R) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Delivers a finish with a very good working surface roughness after machining.
[ ! ]The following additional processing services are available for the products on this page.
Basic Information
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Copper | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Torsion Availability | Included |
Please check the type/dimensions/specifications of the part TSC-BEM2S2.4 in the TSC Series Carbide Ball End Mill 2-Flute / Short Type series.
Specification/Dimensions
-
Length Under Neck (ℓ1)(mm)
-
type
- SN-TSC-BEM2S
- SNR-TSC-BEM2S
- TSC-BEM2S
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
R Precision(μm)
-
Inventory Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Days to Ship
-
- All
- 4 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| TSC-BEM2S0.15 |
| TSC-BEM2S0.2 |
| TSC-BEM2S0.2-6 |
| TSC-BEM2S2.5 |
| TSC-BEM2S2.6 |
| TSC-BEM2S2.75 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Inventory Classification | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 146.47 | 1 Piece(s) | Available | 4 Day(s) or more | 0.15 | 0.6 | 40 | - | 3 | ±0.005 | Stocked Product | 0.3 | 1 | 10° | |
MYR 116.42 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | 0.8 | 40 | - | 3 | ±0.005 | Stocked Product | 0.4 | 1 | 10° | |
MYR 160.94 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | 0.8 | 50 | - | 6 | ±0.005 | Stocked Product | 0.4 | 1 | 15° | |
MYR 145.41 | 1 Piece(s) | Available | 4 Day(s) or more | 2.5 | 8 | 50 | - | 6 | ±0.005 | Stocked Product | 5 | 1 | 10° | |
MYR 289.82 | 1 Piece(s) | Available | 4 Day(s) or more | 2.6 | 8 | 50 | - | 6 | ±0.005 | Stocked Product | 5.2 | 1 | 10° | |
MYR 343.92 | 1 Piece(s) | Available | 4 Day(s) or more | 2.75 | 8 | 50 | - | 6 | ±0.005 | Stocked Product | 5.5 | 1 | 10° |
Additional Products in this Category
- XAC series carbide ball end mill, 2-flute / short, long shank model
- Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute
- Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model
- Ball End Mill for Copper Electrode / Aluminum / Plastic DB
- GSX MILL Ball End Mill GSXB20000 Type
- CBN 2-Flute Spiral Ball-End Mill SBBE-2
- Carbide Ball End Mill for Resin Processing PSB-2
- NSB-2 Ball End Mill
Customers Who Viewed This Item Also Viewed
-
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 4 Day(s) or more
-
-
-
TSC series carbide long neck ball end mill, 2-flute / long neck modelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) modelMISUMI
Days to Ship : 4 Day(s) or more
-
-
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular modelMISUMI
Days to Ship : 4 Day(s) or more
-
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short ModelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short TypeMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide long neck square end mill, 2-flute / long neck modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAC series carbide ball end mill, 2-flute / short modelMISUMI
Standard Price : MYR 98.31-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy